A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
CGI · Glendale

CGI Bathroom Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Bathroom Remodeling: The Glendale Owner’s Guide

We install CGI-compatible bathroom remodeling in Glendale, and a full bathroom remodel with CGI-spec fixtures and finishes typically runs $9,000 – $28,000 installed. When we’re called about a failing CGI-part bathroom, it’s almost always the same story: a shower valve that drips after two years, a vanity top that’s started to craze near the faucet, or a tile membrane letting go behind the surround. The homeowner thinks one part failed. Usually the water behind it has been working on something else too. We quote a flat written price before any work starts, document what we find with photos, and only replace the pieces that have actually failed – not the whole room because it’s easier to sell.

Call (844) 320-5930

Which CGI Models This Applies To

A tile setter installing wall tile in a shower

CGI is the brand most Glendale homeowners meet through builder-grade bath packages: a standard 60-inch alcove tub, a pressure-balanced tub/shower valve, a porcelain vanity top, and a resin or acrylic surround. The model and series number live on a sticker inside the cabinet door or under the sink on the vanity, and on a brass tag on the valve body behind the trim plate. Pull those numbers before you call anyone. One gotcha we see often: CGI changed trim-plate openings on its mid-line valve series around the time its low-arc series was discontinued, so a replacement trim kit that came from the right brand can still be the wrong generation. The other is the vanity top – a CGI drop-in basin built for a 22-inch-deep cabinet won’t seat on a 21-inch Euro-style box, and the hole pattern won’t line up either way.

On OEM versus aftermarket: for the valve, we recommend the original CGI part or a branded equivalent (Kohler or Toto cartridges cross-reference cleanly to most CGI mid-line bodies). On vanity tops and surrounds, quality aftermarket is fine and often better – Cambria or Silestone quartz in place of the CGI cultured-marble top is a spec upgrade, not a downgrade. We carry a sourcing list of fifty-plus vetted brands, including KraftMaid, Cambria and Silestone, so the written quote reflects real part numbers at honest prices rather than a padded allowance.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Bathroom Remodeling Is Failing

Five symptoms we see on Glendale callbacks, and what each usually means:

  • The shower valve drips or runs warm on cold – the cartridge seal has hardened or the pressure-balance spool is sticking. Two years on a CGI builder valve in Glendale’s hard water is not unusual; the mineral load eats rubber faster here than in softer-water markets.
  • The vanity top has a hairline crack radiating from the faucet hole – stress from an over-tightened mounting nut on a cultured-marble or resin top. Once the crack runs, water reaches the cabinet substrate and the deck swells.
  • Grout or caulk at the tub/shower junction keeps failing – movement between the tub apron and the surround, often because the surround panels were set on drywall rather than a waterproof backer. No amount of re-caulking fixes a wet substrate behind it.
  • Tile feels hollow or lifts at a corner – the thin-set or membrane has debonded. In Glendale, a bathroom that sat through a hot summer with a poorly vented fan will show this within one season.
  • Water stains on the ceiling below the bathroom – the drain or overflow gasket on the CGI tub has failed, or the valve body is seeping at a solder joint. Stop using the fixture and call us; this one escalates.

Replacement Cost & What’s Included

A new wood side gate with black hardware

Installed prices in Glendale for CGI-part bathroom work, quoted before any tool comes out of the truck:

Scope Installed Price Range
Full bathroom remodel (CGI-spec fixtures & finishes) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Shower replacement $3,000 – $8,500
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Bathroom vanity installation $800 – $3,000

What drives the range: whether the valve body has to be opened up in the wall, whether the surround sits on water-damaged backer, and whether we’re matching a CGI part or upgrading to a quartz top. Under Clause 1 of The Haven Standard, the price is written with a line-item scope and a written warranty before work starts. No change proceeds without a signed change order – which is why our projects land within a few percent of the number you agreed to. The 365-Day Done Right Promise covers the install for a full year.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely handle a few checks yourself: read the model sticker on the valve and vanity, photograph the crack or stain, and confirm whether the drip is from the spout or the trim plate. That information saves time on the quote. Where DIY goes wrong with bathroom parts is almost always behind the wall – a pressure-balance valve contains a cartridge under spring tension that can release hot water suddenly if opened without shutting the supply and draining the line, and a valve body that’s seeping at a solder joint needs a torch, a permit for the rough-in in most Glendale cases, and a leak test before the wall closes. Re-tiling a shower without a proper waterproof membrane is the other one – it looks fine for six months, then the framing gets wet. Call (844) 320-5930 for a free second opinion on any written estimate, or to have us quote the work. We’re an independent service provider, not affiliated with CGI.

FAQs

A new concrete driveway with a paver border

Get a Written Price Before Any Work Starts

If a CGI part in your Glendale bathroom has failed or you’re planning a remodel, call (844) 320-5930 for a free estimate. Every visit includes a documented photo record, every project starts with a flat written price and written scope, and the 365-Day Done Right Promise back it up.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New architectural shingles with a clean valleyA new casement window over a kitchen sinkA new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA new paver patio with a seat wall and fire pitA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch