A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
CGI · Glendale

CGI Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Glendale Owner’s Guide

We install CGI-compatible windows and doors in Glendale, including replacement sashes, thresholds, hinges, weatherstripping, locks, and glass units. A full CGI window replacement typically runs $4,500 – $15,000 installed in Glendale, and an impact-rated CGI window install runs $8,000 – $25,000, quoted flat in writing before any work starts. Most Glendale owners find out something failed the same way: the door starts dragging on the threshold in August, or the window sweats on the inside of the glass and won’t wipe dry. A few notice the latch won’t catch, or they hear wind whistling past a frame that used to seal tight.

Call (844) 320-5930

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI makes both vinyl and aluminum window and door lines, and the part you need depends on which one is in your wall. The fastest identification is the glass etching in a corner of the pane, or the manufacturer label on the top or side of the sash frame once you open the window. The label lists the series, the size, and often the glass package. Take a photo before you touch anything.

Match the part to the series, not just the size. A sash from one CGI line usually won’t seat into another line’s frame even when the rough opening measures identical, because the balance channel and the hinge stile geometry differ. Glendale homes built or remodeled between 2015 and 2025 often carry CGI vinyl slider and single-hung units in the rear and side elevations, while street-facing openings lean toward aluminum for the narrower sightline.

The OEM-versus-aftermarket call is straightforward. For glass units, weatherstripping, and hardware, a quality aftermarket equivalent that matches the spec performs the same and costs less. For structural sashes and proprietary hinge assemblies, the OEM part is worth the wait. We’re an independent service provider and not affiliated with CGI, so we quote both options in writing and let you decide.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

  • Condensation between the panes. That’s a failed seal in the insulated glass unit, not a humidity problem in the room. Once the desiccant is saturated, the fog stays.
  • Dragging or sticking door. Usually a worn hinge or a threshold that has settled. In Glendale’s hot, dry summers, wood and vinyl expand and contract enough to expose a hinge that’s been slowly backing out.
  • Drafts or whistling at the frame. Failed weatherstripping or a sash that’s out of square. You’ll feel it most on the north and west elevations during Santa Ana wind events.
  • A latch that won’t catch or a lock that won’t turn. A worn keeper, a misaligned strike, or a multipoint mechanism losing its adjustment. Small part, real security gap.
  • Water staining on the interior sill. A failed sill pan, a clogged weep channel, or deteriorated glazing seal. Left alone, it reaches the framing and the drywall below.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Here’s what Glendale homeowners actually pay, installed, with the part and the labor on one line:

Scope Installed Price Range
Window replacement (CGI or CGI-compatible) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Single failed glass unit (IGU swap) Quoted line-item; ask for the written price
Weatherstripping, hardware, hinge, latch Quoted line-item; ask for the written price

The range moves with the number of openings, the glass package, whether the frame stays or the whole unit comes out, and whether the opening is impact-rated. We don’t carry parts on a truck or stock them; we source the matching part and price it before anyone picks up a tool. Every quote is a flat written price with a written scope and a written warranty. Under Clause 1, no work starts until that number is in your hands, and no change happens without a signed change order.

DIY or Call Us?

You can safely check a few things yourself: wipe the glass to confirm the fog is inside the unit, open and close the sash to feel where it binds, look at the weatherstripping for cracks or compression, and photograph the frame label for the series number. That’s information, not repair.

Where owners get hurt is the next step. Replacing a glass unit means handling a heavy, sharp-edged panel that can shatter, and resetting a door hinge or a multipoint lock wrong leaves the opening out of square and leaking. On upper-floor windows, the ladder work is the real risk. If the frame is wet or the hinge is failing, stop and call us at (844) 320-5930. Estimates are free, and we’ll tell you what we found before we quote it.

FAQs

A new wood side gate with black hardware

How long do CGI windows and doors last in Glendale? A CGI window or door installed in Glendale commonly gives 20 to 25 years for the frame, with the insulated glass unit typically failing first at 10 to 15 years in full sun. South- and west-facing units age faster here.

Can the part be repaired instead of replaced? Often yes. A failed IGU, a worn hinge, or cracked weatherstripping can be swapped without replacing the whole window or door, which keeps the cost down. We’ll quote the repair and the replacement side by side so you can compare. Call (844) 320-5930 for a free estimate.

How long does the swap take? A single glass unit or a hardware set is usually a same-visit job. A full window replacement is typically a day per opening, and a whole-house set runs several days. We give you the schedule in writing with the price.

How do you source the part? We identify the series from the label or glass etching, match the part to the spec, and quote both the OEM and a quality aftermarket equivalent where one exists. You get the part number and the price in writing before we order. Call (844) 320-5930 to start.

We handle CGI windows and doors across Glendale alongside the other brands we service, including KraftMaid, Cambria, and Silestone for the kitchen and bath side of the same home. Our technicians have up to 19 years of experience, every visit includes a documented photo record as standard, and the 365-Day Done Right Promise backs the work. Call (844) 320-5930 to schedule your free estimate.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch