







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Glendale Owner’s Guide
We build and complete PGT-spec home additions and ADUs in Glendale, and the installed range runs $45,000 to $130,000 for an addition and $90,000 to $220,000 for a detached or attached ADU, with a written price delivered before anyone lifts a tool. We are an independent contractor and not affiliated with PGT; we work to the alignment, flashing, and tie-in standards the PGT systems call for. Owners usually find the problem in one of three ways: a wall that reads cool to the back of the hand, a hairline at the addition-to-house seam that reappears after every Santa Ana wind event, or a stucco crack that tracks straight along the roofline after a winter rain.
Key Takeaways
- PGT compatibility is a spec question, not a brand question. The series and label decide what will fit.
- Glendale’s heat cycling and the 2023 code adoption for ADUs changed what a compliant build looks like.
- Every project gets a flat written price, a signed change order for any change, and a photo record on every visit.
- Our technicians have up to 19 years of experience across seven trades.
Which PGT Models This Applies To

PGT makes windows, doors, and impact-rated glazing systems, not addition framing or ADU shells, so the real compatibility work is matching the PGT fenestration products that go into your addition or ADU to the wall assembly and the structure behind it. PGT’s WinGuard and SpectraGuard impact lines show up most in Glendale builds, and the series designation lives on the etched glass label in the upper corner of the fixed panel or on the interior jamb sticker. Read that first. The label tells you the series, the glass package, and the tested design pressure, which is what an inspector will want to see.
Measure the rough opening, not the visible glass. PGT frames are sized to a nominal rough opening, and a 1/4-inch error at the sill will show up as a leak within two rainy seasons. The OEM-versus-aftermarket call matters here: for a PGT unit still under manufacturer coverage, an aftermarket sash or a rebuilt operator can void the warranty on the assembly. For an older unit out of coverage, a quality aftermarket match in the same series is a reasonable route, provided the design pressure rating is documented and the flashing detail is rebuilt, not reused.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Water staining at the interior jamb after rain. The head flashing or the sill pan is letting water past the PGT frame. In Glendale, the culprit is usually a flashing lap that runs the wrong direction under stucco.
- Condensation between the panes. The sealed glass unit has lost its bond and the desiccant is spent. It won’t fix itself, and it gets worse every summer.
- A draft at the sash edge. The weatherstrip or the sash alignment has drifted. PGT units can often be re-shimmed and re-gasketed rather than replaced as a whole assembly.
- Stucco cracking along the addition roofline. This points to differential movement between the addition and the main house. It’s a structural tie-in question, not a cosmetic one.
- A soft spot at the ADU wall base. It usually means the weep screed is missing or buried, so water has nowhere to drain and the sheathing is staying wet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Glendale, a home addition runs $45,000 to $130,000 installed, and an ADU runs $90,000 to $220,000, with a garage conversion at $30,000 to $80,000. The range moves on three things: the footprint size, whether the PGT fenestration is impact-rated, and whether the site needs a foundation upgrade or utility trenching to the ADU. Every quote is a flat written price with a written scope, not a “call for a quote.” Nothing proceeds on a change until the change order is signed. A photo record of what was found and what was done is standard on every visit, and the 365-Day Done Right Promise sits on top of the work.
DIY or Call Us?
An owner can safely measure the rough opening, read the glass label, and photograph the flashing detail from the ground. What an owner should not do is rebuild the head flashing, pull the sill pan, or open the wall to chase a moisture trail. Those steps turn a window-and-flashing repair into a structural and waterproofing problem that costs more than the original scope. Additions and ADUs carry permit and inspection obligations in Glendale, and the ADU code set has changed in ways that catch homeowners off guard. Call (844) 320-5930 and we’ll walk the site, name what we found in plain terms, and hand you the number. Estimates are free, and a free second opinion on any written estimate is available line by line.
FAQs

A sealed unit usually holds its gas for 15 to 25 years, and the frame and hardware commonly outlast the glass. In Glendale’s inland heat, south and west exposures run shorter on the seal than shaded elevations, so a whole-house replacement rarely needs to happen all at once. Call (844) 320-5930 for a free written estimate on the units that have actually failed.
Sometimes yes. A failed sash, operator, weatherstrip, or glass unit can be replaced individually in most PGT series without touching the frame. When the frame itself is bowed or the flashing is wrong, repair is money spent twice, and we’ll tell you which case you’re in. Call (844) 320-5930 for the straight answer.
A single window or door swap is a same-day job; a full addition or ADU is a multi-month build scheduled around permit approvals. The written scope gives you the timeline in days and weeks before you commit. Call (844) 320-5930 to schedule the free estimate.
We source through our vetted brand network, which includes PGT alongside KraftMaid, Cambria, and Silestone, and we match by series and design pressure so the replacement is documented. We don’t carry parts on a truck and won’t claim to; the part gets ordered to your spec. Call (844) 320-5930 for an exact quote.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












