A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
PGT · Glendale

PGT Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A new concrete driveway with a paver border
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Glendale Owner’s Guide

PGT kitchen remodeling work in Glendale generally runs $14,000 – $45,000 for a full kitchen and $4,000 – $13,000 when the job is cabinets and counters only, and we match PGT-spec products to your existing kitchen layout rather than forcing a generic package. Rowan Construction Group Glendale is an independent contractor and is not affiliated with PGT; we work with PGT products, KraftMaid, Cambria and Silestone where a PGT match isn’t the right answer.

Call (844) 320-5930

Most Glendale owners don’t start with a product page. They start with a drawer front that has swollen along the bottom edge after a wet winter, a cabinet door that no longer sits flush because the hinge plate pulled out of the particleboard, or a countertop seam that has opened up over a dishwasher that vents directly underneath. In a 1920s Spanish Colonial off Adams Hill or a 1980s townhome near the Galleria, the trigger is usually moisture, not age. The kitchen didn’t fail all at once. One component did, and the rest of the room gets judged by it.

Which PGT Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

PGT builds to a set of standard cabinet box dimensions, and the details that matter most when you’re matching a replacement are the box depth, the drawer glide pattern and the hinge bore spacing on the door. Standard base cabinets are 24 inches deep and 34.5 inches tall before the counter, uppers are 12 inches deep, and PGT’s framed boxes use a 3/8-inch reveal that aftermarket doors cut to a frameless spec won’t close cleanly. Measure the box, not the door. The door is the part that moved.

The identifying information lives on a label inside the cabinet box, usually on the inside of the sink base or the back panel of a drawer bank, and it carries the series and finish code. Photograph that label before anything is ordered. For PGT specifically, the OEM-versus-aftermarket call comes down to finish matching: PGT’s stained and painted finishes shift slightly by production run, so an aftermarket door in “white” is not the same white as a PGT door from a different year. Where the finish has to match a run of cabinets you’re keeping, we quote OEM-spec. Where it doesn’t, a quality aftermarket equivalent in the same box dimension saves real money. Glendale kitchens with mixed vintages are common, and that decision gets made per cabinet run, not per kitchen.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

  • Drawer glides that bind in humid months and free up in dry ones. The glide is a mechanical part with a rated cycle count, and a roller-style glide that has lost its tolerances will drag unevenly. In Glendale, the swing between a damp winter and a dry Santa Ana fall is enough to expose a glide that’s already worn.
  • Door hinges that won’t hold adjustment. The hinge plate screws have stripped the particleboard behind them, usually because the door was hung on a box that was never shimmed square. Adjusting the hinge again won’t fix it; the screw hole needs to be repaired or the box replaced.
  • Swollen or delaminated cabinet box panels. Particleboard and MDF wick water at the cut edges first, which is why the damage shows at the toe kick and under the sink. A swollen panel is a structural failure of the box, not a cosmetic one.
  • Countertop seams that have opened or lipped. Seam failure usually traces to substrate movement, often a dishwasher or under-sink moisture source. The seam is the symptom; the substrate is the cause.
  • Caulk lines at the backsplash that keep reopening. Repeated caulk failure means the wall and the counter are moving differently. That’s a movement problem, and new caulk buys you a season at best.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new paver patio with a seat wall and fire pit

Glendale pricing for the components most often replaced, installed, with the old material hauled away:

Scope Installed range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the number is box count, whether the layout moves, and whether the substrate is sound. Cabinets in a 10×10 galley land near the bottom of the cabinet range; a wall removal or an island with a relocated circuit pushes toward the top. The written quote itemizes parts and labor separately, so you can see what the PGT-compatible components cost versus the installation. The work carries our 365-Day Done Right Promise, and under Clause 1 the flat price is written before anyone picks up a tool. No change proceeds without a signed change order.

DIY or Call Us?

You can safely pull a drawer, photograph the label inside the box, measure the box depth and width, and check whether the cabinet is level with a 2-foot spirit level. That information is genuinely useful and we’d rather you have it.

What goes wrong on your own: cabinet boxes are fastened to studs and to each other, and a homeowner working alone on an upper cabinet is holding 60-plus pounds at head height with nothing but a screw gun. Countertop demounting is worse. Stone is heavy, seams are brittle, and a dropped slab is a full replacement, not a repair. Anything involving a relocated outlet, a dishwasher circuit or under-cabinet lighting is electrical work, and in Glendale that means a permitted job. Our technicians have up to 19 years of experience and are background-checked and uniformed. Call (844) 320-5930 to schedule a free estimate.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing roofline

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch