A Rowan company - serving Glendale, CA
A home with a brand-new roof and gutters at golden hour
Boral · Glendale

Boral Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Glendale Owner’s Guide

We install and repair Boral-compatible windows and doors in Glendale, and most of the work lands between $4,500 and $15,000 for a full window replacement and $8,000 to $25,000 for impact-rated units, depending on count, glazing, and frame condition. Parts-level repairs (operators, hardware, weatherstripping, sashes) typically run well under $1,000 and are usually scheduled within days, not weeks. Rowan Construction Group Glendale is an independent service provider, not affiliated with Boral.

Call (844) 320-5930

Owners usually find the problem the same way. A crank turns but nothing moves. A door leaf drags on the sill in July and swings free by November. A window that sealed tight two winters ago now whistles at the corners during a Santa Ana wind. Glendale sits in a dry-summer, mild-winter pocket of the San Fernando Valley floor, and that swing between 20% and 80% relative humidity works hardware and seals harder than most of the country realizes.

Key Takeaways

  • Boral window and door parts are matched to the series and model stamp on the unit, not the year of the house.
  • Aluminum-clad and vinyl units fail in different places. We confirm which you have before quoting a part.
  • Written price before any work starts, every trade, every visit.
  • 365-Day Done Right Promise on the work, plus a documented photo record of what we found and replaced.

Which Boral Models This Applies To

A new roof with clean valleys and new flashing

Boral’s residential window and door lines include aluminum-clad wood units, vinyl new-construction and replacement series, and impact-rated assemblies sold through regional distributors. The part rarely interchanges across those families. A tilt-latch from a vinyl double-hung will not seat in an aluminum-clad casement, and a door roller from one patio series will bolt up wrong on another. The reliable identifier is the stamp or label on the frame and sash: a model or series code, a size designation, and often a performance rating printed on a small sticker inside the jamb or on the head of the sash. Photograph that label. It is the single most useful thing you can hand a service tech.

If the label is gone, we measure instead: rough opening width and height, sash thickness, hinge offset, roller track profile. A digital photo record of those measurements goes into the file, which means if we have to order a part we order the right one. On the OEM-versus-aftermarket call, Boral-specific hardware is worth it for moving parts inside the unit (operators, hinges, locks, tilt latches) where fit is unforgiving. Weatherstripping, glazing tape, and sealants perform fine from quality aftermarket sources, and we say so on the quote rather than padding it. We source across fifty-plus vetted brands, including KraftMaid, Cambria, and Silestone on other trades, and the written quote reflects real part costs, not inflated ones.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

  • A crank that spins free or grinds. The operator’s worm gear or the sash arm teeth have stripped. In Glendale, sun exposure on south- and west-facing units accelerates grease breakdown, and a dry operator eats itself within a season or two of first stiffness.
  • The door leaf drags at the strike or sill. Rollers have worn flat or the track has filled with grit and pollen. Left alone, dragging wears the bottom rail and turns a hardware swap into a panel repair.
  • Visible daylight or a whistle at the corners. Weatherstripping has compressed and lost its memory, or the frame has shifted slightly on the opening. Common after a hot dry summer on older installations where the shim pack was thin.
  • Fogging between the panes. The insulated glass unit’s perimeter seal has failed and moisture has entered. The window still opens; the glass is what’s gone, and only the IGU needs replacing, not the whole unit.
  • Locks that no longer line up. The keepers have moved with the frame or the sash has warped from heat. Sometimes a keeper adjustment solves it; sometimes the lock hardware is worn and needs replacing.

Two checkable realities worth knowing. First, an insulated glass unit in a Glendale installation typically holds its seal for 15 to 25 years before fogging becomes likely, and units on west elevations often go first. Second, door rollers on high-traffic patio doors are a wear item with a practical life of roughly 8 to 12 years under normal use, which is why dragging doors are one of the most common service calls we take in Glendale.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here is the installed range for Glendale, written as a flat price with a written scope:

Work Installed Price Range
Window replacement (full unit) $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Parts-level repair (operator, hardware, seal, sash) Well under $1,000

What drives the range: number of openings, glazing package, frame material, whether the rough opening needs work, and whether the job is a like-for-like swap or a full-frame replacement. Parts plus labor are line-itemed separately so you see the hardware cost and the labor cost, not a bundled guess. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. The 365-Day Done Right Promise covers the work: if it is not done right, we make it right. Free second opinion on any written estimate, including a competitor’s, reviewed line by line.

DIY or Call Us?

What you can safely check yourself: photograph the frame and sash label, measure the rough opening, wipe and inspect the roller track, test whether the crank moves the sash at all, and note which windows fog. That information speeds up the diagnosis and costs nothing.

Where DIY goes wrong: replacing an operator or a patio door panel on a clad or impact-rated assembly. Windows and doors are heavy, the panels are glazed and brittle at the edges, and modern impact units carry a specific fastener pattern that a wrong screw placement can void the performance rating. Climbing to service a second-story unit adds a fall risk that no hardware savings justifies. Bring us the photos and the label shot. We will tell you whether it is a part or a panel. Call (844) 320-5930 for a free estimate.

FAQs

A garage converted into a guest room and home office

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA new front entry door with glass sidelightsA new black aluminum pool fence with a gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch