







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Glendale Owner’s Guide
We install and repair Boral-compatible roofing throughout Glendale, and a typical roof repair runs $400 – $1,800, with a full roof replacement ranging $8,000 – $20,000 depending on pitch, material and square footage. Boral makes clay, concrete and slate-profile roof tiles, which means the “part” failing on your roof is almost always a tile, an underlayment band, or a flashing detail rather than the roof system as a whole. Owners usually find out the same way: a hairline crack across a field tile after a hot stretch, a drift of clay granules in the gutter after the first winter rain, or a damp stain on the ceiling drywall below a valley that never leaked before.
Which Boral Models This Applies To

Boral’s residential lines fall into three practical buckets: clay tile, concrete tile, and the slate-profile products. Knowing which one you have changes everything about the replacement part, because profile, thickness and interlock differ between them and a mismatched tile will not seat flat against its neighbors. Look for a stamp or ink mark on the back of an exposed tile edge at the eave or a side rake; Boral tiles carry a manufacturer marking, and that is your starting point for matching. If the stamp is worn, measure the exposed face (the visible portion of the tile) and the tile’s overall width and note the profile shape – S-tile, flat, or the high-profile slate look.
This is where the OEM-versus-aftermarket call matters for Boral specifically. A genuine Boral replacement tile in the matching profile is the cleanest match for color and interlock, but discontinued colors and legacy profiles are common on older Glendale roofs. A quality aftermarket clay or concrete tile in the same profile can work when it engages the interlock correctly and the color is close enough that the repair does not read as a patch. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Boral; we source the match honestly and tell you on the written quote which route we’re taking and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile is a durable material, and the tile itself often outlasts the components beneath it. Watch for these:
- Cracked or shattered field tiles. Thermal movement across a hot Glendale day, or a foot placed wrong during an HVAC or solar visit, cracks concrete and clay tile. The crack lets water past the tile and onto the underlayment, which has a shorter life than the tile.
- Granule or clay drift in the gutter and downspout. Fine grit washing off the roof after rain can mean the tile surface is breaking down or that the underlayment is degrading underneath. Either way it is a signal worth reading, not sweeping away.
- Slipped or misaligned tiles. A tile that has slid out of course exposes the underlayment and flashing to direct sun and rain. Broken or missing fasteners under the tile are usually the cause.
- Interior ceiling or wall stains. Brown rings on the drywall after a storm point to water getting through the tile layer, a valley flashing, or a compromised underlayment band. The leak is rarely where the stain is.
- Moss, dark streaking, or granule loss on the tile face. Organic growth and algae streaking are cosmetic up to a point, but heavy moss holds moisture against the tile and can push a failing tile over the edge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Glendale vary by scope and access. A single tile swap or small repair typically runs $400 – $1,800; a larger tile roof repair sits between $600 – $2,500; a full roof replacement runs $8,000 – $20,000. The range is driven by roof height and pitch, how many tiles must come up to reach the failure, whether the underlayment needs replacing, and whether the tile can be matched from current stock or requires a discontinued-color hunt.
Every quote is a flat written price with the scope spelled out – tiles, underlayment, flashing, and the labor to lift and re-seat surrounding tiles – before any work begins. There is no “call for a quote” step here; the number is on the page and on the paper. No change proceeds without a signed change order, and the work carries our 365-Day Done Right Promise under The Haven Standard: if it is not done right, we make it right.
DIY or Call Us?
The honest split: an owner can safely walk the perimeter at ground level, note cracked or slipped tiles from below with binoculars, check gutters for granule drift, and photograph anything that looks off. Tile roof work goes wrong fast for a homeowner, because tile is brittle, the pitch is steep, and stepping on a field tile can crack it or, worse, send you off the roof. Lifting and re-seating tile to reach a leak also means the underlayment and flashing details must go back correctly or the repair leaks worse than the original. On top of the fall risk, a misjudged repair can break a course of tiles that were otherwise sound. We handle the part matching, the lift, and the re-seat, and we leave a documented photo record showing what we found underneath before we closed it up.
Bring us a competitor’s quote and we will review it line by line at no charge as a free second opinion. Call (844) 320-5930 to schedule a written estimate.
FAQs

Boral clay and concrete tile is a long-life surface – decades – but the underlayment beneath it is the shorter-lived layer, and in Glendale’s hot, dry summers with seasonal rain, that underlayment is often the part that fails first while the tile above still looks fine. That is why a leak can appear under intact tile.
Often yes. A single cracked or slipped tile can be lifted and replaced, and flashing or underlayment issues underneath can be repaired without tearing off the whole roof, which keeps the job in the $400 – $1,800 repair range rather than a full replacement. The repair depends on whether the profile and color can be matched, which we confirm before quoting.
Most single-tile repairs and small Boral tile fixes are completed in a single visit, though access and the number of surrounding tiles that must come up to reach the failure can extend it. On the day, we tell you what we found and what we did, with photos.
We identify the profile and color from the tile marking or by measuring the exposed face, then source a genuine Boral match where it is still available or a quality aftermarket tile in the same profile. Call (844) 320-5930 for an exact quote on your roof – the estimate is free, and we also source KraftMaid, Cambria and Silestone for the rest of the house.
Roof work on Glendale tile is a job where the written price matters as much as the tradesman, and we put the number on paper before anyone climbs the ladder – call (844) 320-5930 for a free estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












