A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Atlas · Glendale

Atlas Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Glendale Owner’s Guide

We install Atlas-compatible kitchen remodeling in Glendale at a typical installed price of $14,000 – $45,000 for a full kitchen, $9,000 – $20,000 for a small kitchen, and $4,000 – $13,000 for cabinet installation alone. Rowan Construction Group Glendale is an independent contractor, not affiliated with Atlas, and we quote a flat written price before any work starts. Most owners call us after a cabinet door stops closing flush, a drawer box cracks along the bottom rail, or the finish starts lifting near the sink where steam hits it daily.

Call (844) 320-5930

Which Atlas Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Atlas kitchen cabinetry shows up in Glendale homes in a few recognizable forms: builder-grade slab-door runs from the 2000s, semi-custom shaker and raised-panel lines, and the modern frameless boxes with full-overlay doors. The part that matters most is the cabinet hardware and box construction, because that’s what fails. To match the right replacement, look for the Atlas label inside a cabinet door or on the back panel: it usually carries a model code and a box depth (commonly 12″ or 24″). Measure the existing door height and width to the nearest 1/16″ and note whether the hinge plate is side-mount European (35mm cup) or face-frame. A 35mm hinge bore is standard, but Atlas used both 32mm and 35mm cup patterns depending on the line, so the measurement is the compatibility check that saves a return trip.

On the OEM-versus-aftermarket call: for hinges, drawer slides, and shelf clips, a quality aftermarket equivalent (Blum, Grass, or KV) usually outlasts the original and fits the same bore. For door fronts and finished panels, matching an Atlas stain or laminate is where aftermarket gets tricky, and that’s the part we take the most care sourcing through our vetted brand network. We also work with KraftMaid, Cambria, and Silestone when an Atlas line has been discontinued and a full swap of a cabinet run or countertop makes more sense than chasing a single orphan door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

  • Doors that won’t stay closed or hang crooked. The hinge cup screws have stripped the particleboard, or the hinge arm bent. Particleboard loses its grip after a few open-close cycles once damp – common near a Glendale kitchen sink.
  • Drawer boxes cracking at the bottom rail. The staples or dado joint give out under the weight of pots and cast iron. A cracked box means the load rating was exceeded, not that you did anything wrong.
  • Finish lifting or flaking near the sink and range. Steam and heat from daily cooking swell the substrate under the laminate or paint. Glendale’s dry summers and wet winters push that expansion-contraction cycle harder than a mild climate would.
  • Soft-close mechanism failing (slamming drawers). The dampener inside the slide wears out or the slide rail wears a groove. Sourced slides are usually the fix, not the whole cabinet.
  • Cabinet box separating from the wall or leaning. Loose anchor screws or a failing toe-kick under load. This one points to the install method, not the hardware, and it needs a look before it gets worse.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

Every Glendale price we quote is a flat number in writing before the first tool comes out, with the scope spelled out: which doors, drawers, slides, and hinges we’re replacing, and how the finish will be handled. Here’s how the ranges break down for an Atlas kitchen:

Item Installed Range (Glendale)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation (box + doors) $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

The range moves on cabinet box condition (rotted substrate pushes toward replacement), door style and finish (a custom stain match runs higher), and whether the countertop comes off to reach the cabinets. Hardware-only swaps sit at the low end; a full cabinet run with new countertops sits at the top. Every job gets our 365-Day Done Right Promise and a written workmanship warranty, and our technicians have up to 19 years of experience matching parts to the right box.

DIY or Call Us?

You can safely check most of this yourself: open a door and look at the Atlas label, measure the hinge bore, note a cracked drawer box, photograph the finish damage. Those are inspection steps, not repair steps. Where DIY goes wrong is the swap itself. Replacing a hinge with the wrong cup pattern wallows the screw holes; forcing a drawer slide into a worn dado cracks the box further; and a loose cabinet box that looks like a hardware problem can be a wall-anchor problem that needs to be fixed before anything is hung on it. A mis-drilled door front is expensive to undo.

If you’ve got the label and the measurement, that’s most of the battle. Call us at (844) 320-5930 and we’ll match the part, quote a flat written price, and include a documented photo record of what we found and what we swapped – not an optional extra.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA new clay tile roofNew double-hung windows in a dining room

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch