







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Glendale Owner’s Guide
IKO-compatible bathroom remodeling in Glendale typically runs $9,000 to $28,000 installed, depending on the footprint, fixture tier, and whether we’re opening walls to replace a failed waterproofing layer. We quote a flat written price before any work starts and back the work with the 365-Day Done Right Promise. Rowan Construction Group Glendale is an independent contractor; we are not affiliated with IKO.
Owners in Glendale usually discover the problem the same way: a bubble in the paint beside the shower, grout that crumbles every time they wipe it, or a soft spot in the subfloor under the toilet that wasn’t there last spring. On a 1920s Spanish bungalow in Adams Hill or a 1980s townhome near the Galleria, the culprit is usually the waterproofing membrane behind the tile, not the tile itself. Once moisture is finding a path through, the visible damage is a lagging indicator of what’s happening underneath.
Our technicians have up to 19 years of experience, and every visit includes a documented photo record of what we found.
Which IKO Models This Applies To

IKO makes the waterproofing layer that goes under tile in a wet area – their sheets and membranes differ in composition, thickness, and joint method, and the right one depends on what your substrate is. On a Glendale remodel, the substrate could be a cement backer board over wood framing (common in post-war homes) or a mortar bed over a framed floor (common in older Spanish and Tudor builds), and each takes a different membrane. Before we quote, we identify what you have by reading the printed product name off any surviving wrapped edge and by measuring sheet thickness with a caliper. If the label is gone, a moisture reading at the substrate tells us whether the existing membrane has failed.
IKO markets several lines. We see their sheet membranes most often on newer work, usually installed with a fabric or liquid-applied liquid joint over the seams. A 40-mil sheet laid over a mortar bed behaves differently from a 60-mil over backer board when the framing moves, and that difference shows up as cracked grout lines in a home that sees seasonal temperature swing.
The OEM-versus-aftermarket call here is straightforward. IKO-compatible sheets have specific overlap requirements and their own seam adhesive, and an aftermarket membrane of similar thickness is fine so long as the seam method matches. Where we see failures is a contractor pairing one brand’s sheet with another brand’s adhesive or laying a seam without the correct overlap. That’s a compatibility problem, not a product-quality problem, and it’s what a photo record should be able to prove.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Grout that keeps cracking in the same line. Movement between the substrate and the tile bed is the usual cause, and often the membrane underneath is bridged rather than bedded correctly. Recalking without diagnosing the source is the cycle owners can’t break.
- Soft or spongy flooring near the shower threshold. Water is getting past perimeter seams the installer sealed incorrectly. A threshold that reads soft to a screwdriver means moisture has reached the framing – a structural repair, not a cosmetic one.
- Musty smell with no visible leak. Damp drywall or an intact but compromised backing board. In Glendale’s dry summers, a persistent musty smell in a bathroom is a reliable signal the membrane has failed somewhere the eye can’t see.
- Peeling paint on the wall opposite the shower. A classic sign of moisture migrating through a wall cavity. Paint peeling in the bedroom sharing that wall is almost always the same problem.
- Mold recurring near the floor-to-wall joint. Standing water behind the baseboard or a failed caulk line, often over a membrane that was never properly lapped into the pan.
Replacement Cost & What’s Included

Bathroom remodel ranges in Glendale:
- Full bathroom remodel: $9,000-$28,000
- Small bathroom remodel: $5,000-$12,000
- Walk-in shower installation: $4,500-$12,000
- Tub-to-shower conversion: $3,500-$10,000
- Shower replacement (membrane and tile): $3,000-$8,500
- Vanity installation: $800-$3,000
The membrane is only part of the total; the quote is broken out line by line so you can see labor, membrane and backer, tile, and the plumbing rough work. What drives the range is substrate repair, whether we’re opening a wall to fix framing, and tile selection. Under Clause 1, the price is written before anyone starts, and no change proceeds without a signed change order – that’s the discipline that keeps projects within a few percent of the agreed cost.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check for moisture at the caulk lines and floor joints, look for visible cracks at grout intersections, and note where a persistent musty smell is strongest. That’s information-gathering, not repair.
What we don’t recommend doing yourself is replacing the membrane. A membrane is a two-layer system bonded to the substrate with specific overlap and seam adhesives; a membrane that looks fully installed can fail at the seam or the drain flange in a way that only reveals itself months later. The patient is a weight-bearing drain connection, and the failure mode is structural rot behind a wall – not something you want to test with a weekend. Lay the tile wrong and you go back in once; lay the membrane wrong and you open the floor.
Call (844) 320-5930 to schedule your free estimate – a written price with a written scope, no “call for a quote.”
FAQs

An IKO-compatible membrane correctly installed and sealed will typically outlive the tile bed above it – 20 to 30 years is a reasonable expectation. The failure we see in Glendale is almost never the membrane material itself; it’s the seam or the drain bond. Glendale’s seasonal temperature swings, dry summers and cooler winters, work the seams hardest, so the overlap and adhesive method matter more than the brand on the roll. Call (844) 320-5930 for a line-item quote.
Sometimes, if the failure is a single isolated seam and the surrounding membrane is sound. In our experience most Glendale failures are broader than one seam, because water has already reached the substrate and the visible bubble is the last domino, not the first. We’ll tell you which category you’re in after a moisture reading and a look at the substrate. Call for a free second opinion on any written estimate.
A shower membrane replacement typically takes two to four working days once the plan is written and materials are on site: demolition, substrate repair, a cure window, then membrane, tile and cure before use. The timeline is written into your scope so you know when the bathroom is back. Call (844) 320-5930 to schedule.
We source IKO-compatible membranes and seam adhesives from authorized distributors and bring the written spec to the door with the part number and thickness matched to your substrate. We don’t stock parts on a truck – the product is ordered to the plan. If there’s a compatibility doubt, the photo record showing the substrate, membrane and seam method is what we bring back. We also supply KraftMaid, Cambria and Silestone for other parts of the job. Call (844) 320-5930.
What the Walkthrough Looks Like
A free estimate starts with the symptom, not the sale. We read the grout lines, take a moisture reading where tile meets the floor, and measure the substrate thickness at the shower threshold. If the membrane is a casualty, we photograph what we found before anything comes out. You leave with a written price, a written scope, and a warranty on the work; if it isn’t done right, the 365-Day Done Right Promise makes it right. Our technicians are background-checked and uniformed, and calls are answered by a live person around the clock.
We see the most surprising bathroom failures in Glendale’s older bungalows around Adams Hill and El Rito, where a hundred-year-old framing assembly absorbed water for decades before the first paint bubble appeared. Bringing in the evidence – the reading, the measurement, the photo – is what separates a quote from a guess.
Call Rowan Construction Group Glendale at (844) 320-5930 to schedule your free estimate. One call, a written price before any work starts, and a documented record when the crew leaves.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












