







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Bathroom Remodeling: The Glendale Owner’s Guide
We install CertainTeed-compatible bathroom systems and replacement components for Glendale homeowners, with full bathroom remodels typically running $9,000 – $28,000 installed, and most failures traceable to a specific component we can identify from your model label on the first visit. CertainTeed makes the backer board, moisture barrier and trim pieces behind a lot of Glendale bathrooms, and when one layer gives out, the failure shows up as a soft spot behind tile, grout that keeps cracking in the same line, or a musty smell that returns after every cleaning. Because owners can’t see through the wall, they usually discover the problem months after it started. We find it with a moisture meter and a look at the substrate, then quote the fix in writing before we open anything up.
Which CertainTeed Models This Applies To

Most of the CertainTeed material in a Glendale bathroom is one of two lines: Diamondback tile backer board (the 1/4-inch and 1/2-inch sheets, usually stamped with the product name on the face) or GlasRoc moisture-resistant gypsum board for the dry zones. Both get used in wet areas alongside a waterproofing membrane, and the failure is almost never the board itself. It’s the seam treatment, the fastener pattern, or a membrane that was lapped the wrong way.
To match the right replacement, we look at three things: the product stamp on the exposed edge of any cut sheet, the thickness with a tape measure (1/2-inch backer vs 5/8-inch gypsum reads differently at the tub flange), and the age of the surround so we can tell if a manufacturer’s spec change happened between install and repair. CertainTeed has revised fastener spacing and seam-tape guidance over the years, and a 2016 install may not meet the current sheet. That’s the compatibility gotcha most owners miss: replacing a panel with today’s version can create a mismatch at the seam if the older sheet’s edge profile is different.
OEM CertainTeed replacement sheets cost more than generic cement board. We quote both, with the spec difference in writing, so you’re deciding on numbers rather than brand loyalty. We’re an independent contractor and not affiliated with CertainTeed; we source their products through supplier channels.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Bathroom Remodeling Is Failing
These are the symptoms Glendale owners call us about, and what each one usually means:
- Grout cracking in the same line, repeatedly. A crack that returns after regrouting points to movement behind the tile, often a backer seam that wasn’t taped or a board that absorbed moisture and swelled.
- A soft or hollow sound when you tap the wall. Tapping a tile wall and hearing a dull thud instead of a sharp tick means the board has lost bond or gone soft underneath. It won’t fix itself.
- Musty smell that returns after cleaning. In Glendale’s dry climate, a persistent smell in a bathroom usually means trapped moisture in a wall cavity, not surface mold. The source is behind the tile.
- Tile lifting or bulging near the tub or shower base. Water got behind the surround at the flange seam, and the board has swelled enough to push tile outward. This one needs opening up, not patching.
- Visible water staining on the ceiling below. In a two-story Glendale home, a stain under the bathroom floor means the pan or the wall assembly is leaking downward. That’s a stop-and-fix-now signal, not a watch-and-wait.
Replacement Cost & What’s Included

Installed prices for the work that surrounds a CertainTeed failure, priced for the Glendale market:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
What drives the number: how much tile and board has to come out, whether the pan and drain are reusable, and whether the wall framing behind the wet area is sound. A repair that stops at the surround sits at the low end; a full gut with new waterproofing, tile and trim sits at the high end. Our quotes separate parts from labor so you can see what the CertainTeed material costs against the installation. Every quote is a flat written price with a written scope and warranty before work starts, and under Clause 1 of the Haven Standard that price holds unless you sign a change order. The 365-Day Done Right Promise covers the workmanship for a full year.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: tap the wall for hollow spots, look at the caulk line where tile meets tub, and dry the area for a week to see if a smell clears. That tells you whether the problem is surface or behind the wall. What you shouldn’t take on is removing tile from a wet wall to inspect the backer, because cutting into a surround can release a trapped leak onto the floor below and turn a fix into a ceiling repair. Tearing out board in a shower also means re-waterproofing a wet area to current code, and a DIY redo that skips the membrane fails again in a couple of years. If the symptom is a soft wall or a stain below the bathroom, have it looked at. Call (844) 320-5930 and we’ll tell you what we think without charging for the look.
Frequently Asked Questions

Twenty to thirty years when the waterproofing and seam treatment were done correctly, and much less when they weren’t. Glendale’s dry air is forgiving on the surface, so failure usually comes from water getting in at the flange and staying trapped, not from humidity alone. If the assembly was built right, the board outlasts the tile. Call (844) 320-5930 for a free estimate if you’re unsure how yours was assembled.
Sometimes, yes, if the moisture is caught early and the damage is limited to one wall or one seam. A localized repair that replaces a section of board and re-waterproofs the seam costs far less than a full surround. But if the board is soft or the framing behind it is affected, a patch fails again quickly, and we’ll tell you which situation you’re in before we quote. Call (844) 320-5930 to schedule a look.
A single-wall or shower-panel replacement usually runs two to four working days; a full bathroom remodel runs two to four weeks depending on tile and fixtures. We give you the schedule in the written scope, not a verbal estimate. If you’re comparing timelines, bring a competitor’s quote and we’ll walk through it line by line at no charge. Call (844) 320-5930 to get your scope in writing.
Through supplier channels that carry the CertainTeed line, matched to your existing sheet thickness and product version, with the spec listed on the quote. We don’t claim to stock parts or carry them on a truck; the part is ordered for your job, and the quote names it. We also work with KraftMaid, Cambria and Silestone on the same remodels. Call (844) 320-5930 for a free estimate and a written parts list.
Get Your CertainTeed Bathroom Priced in Writing
If your Glendale bathroom is showing one of these symptoms, call (844) 320-5930 for a free estimate. We’ll identify what’s failing, tell you what we found in plain terms, and hand you a flat written price before anything gets opened up. Every visit includes a documented photo record, our crews are background-checked and uniformed, and a live person answers the phone around the clock. Estimates are free, and a second opinion on a competitor’s written quote costs nothing.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












