







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Glendale Owner’s Guide
We build and finish Sterling-spec home additions and ADUs across Glendale, and the installed price for a full home addition runs $45,000 – $130,000, while a detached or attached ADU runs $90,000 – $220,000. Sterling is a finish-and-fixture brand, not a structural shell, so the work splits cleanly in two: the framing, foundation and envelope that make the space legal, and the Sterling-grade doors, windows, cabinetry and trim that make it match the house. Most Glendale owners discover the gap the same way: a permit inspector flags an unpermitted rear addition on a title report, a converted garage turns out to have no insulation or rated egress, or a “finished” ADU fails because the Sterling slider was set into a wall framed for a standard unit and never flashed correctly.
Key Takeaways
- Sterling-spec home additions in Glendale: $45,000 – $130,000 installed.
- Sterling-spec ADUs in Glendale: $90,000 – $220,000 installed.
- Garage conversions run $30,000 – $80,000 and are the most common starter ADU here.
- We’re an independent contractor, not affiliated with Sterling. We build to Sterling specs and source matching components.
- Every job carries a flat written price before work starts, signed change orders only, and a photo record when we leave.
Which Sterling Models This Applies To

Sterling’s residential line covers entry and interior doors, vinyl and wood windows, sliding patio doors, and a trim and millwork catalog, and the model number is the whole game. Before we quote anything, we read the label. On Sterling doors it sits on the top edge of the slab or the hinge jamb; on windows it’s a sticker on the head jamb or a stamp on the sash, and it encodes the series, the size call-out (width by height in inches) and the handing. Write it down exactly. A “3068” door is 36 inches by 80 inches; order a 2868 by mistake and it will not fit the rough opening you already framed.
The OEM-versus-aftermarket call depends on what’s failing. For a Sterling window where only the glass unit has gone, a matched insulated glass unit is cheaper and keeps the original frame and warranty intact than a full replacement. For a Sterling interior door that’s been damaged, a same-spec aftermarket slab in the correct handing and thickness is a fair substitute and often faster to get. For exterior doors and windows that carry the building envelope, we stay with Sterling-spec components so the flashing, sill pan and weather seal match what the wall was built for. If you have the model label, bring it. It turns a week of guessing into an afternoon.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
- Water staining at the interior head or sill of a Sterling window or patio door. That’s usually a failed sill pan or missing flashing at the rough opening, not the unit itself. By the time you see the stain, the sheathing behind it has been wet for a season.
- A door that sticks, drags or won’t latch through the year. In Glendale’s dry summers and wet winters, wood slabs and jambs swell and shrink more than owners expect. Sticking that changes with the season is a humidity-and-fit problem; sticking that never changes is a hinge or framing problem.
- Fogging or condensation between the panes of a Sterling window. The sealed glass unit has lost its seal. It’s a glass swap, not a whole-window replacement, and it’s one of the most common calls we get on Sterling units.
- An ADU or addition that fails inspection on egress or ceiling height. A rear addition or converted garage that was finished without permits almost always trips on door width, window egress or ceiling height. We measure against the current code before we quote a fix.
- Gaps, drafts or visible daylight at trim and casing joints. Sterling trim and millwork that wasn’t acclimated to the house before installation will open at the miters within a year. It’s a fit-and-finish failure, and it’s correctable without tearing out the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the installed range for Glendale, in dollars, so you can compare before you call:
| Scope | Installed range |
|---|---|
| Home addition (Sterling-spec finish) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What moves the number: square footage, whether the foundation and utilities are new or existing, the permit and inspection path through Glendale, and how much Sterling-grade finish you want (doors, windows, trim, cabinetry versus a code-minimum build). The quote we hand you is a flat written price with a written scope and a written warranty, broken out line by line so you can see parts and labor separately. No change order gets signed by us until you’ve signed it first. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool, and on 4,000-plus jobs that discipline has kept projects within a few percent of the agreed number. The 365-Day Done Right Promise covers the work for a full year.
DIY or Call Us?
Some of this you can check yourself safely. Read the model label on your Sterling doors and windows and write it down. Measure the rough openings and the ceiling height in a converted garage. Photograph any water staining at a sill or head before you touch it. Where it goes wrong: structural openings, foundation and utility work on an addition or ADU, and anything that touches the building envelope. A window or patio door set without a proper sill pan and flashing will leak into the wall long before you notice, and pulling a load-bearing wall without an engineer’s stamp is how a cheap project becomes an expensive one. Addition and ADU work also means permits and inspections in Glendale, and unpermitted work is a problem that follows the house at sale. Call (844) 320-5930 and we’ll walk the space, tell you what we found in plain terms, and put the number in writing.
FAQs

Expect 15 to 25 years on a well-installed Sterling window or exterior door in Glendale, and the failure that ends it early is almost always water at the opening, not the product. Glendale’s hot, dry summers and wet winters stress seals and finish, so the flashing and paint film at the sill matter as much as the unit. If yours is fogging or leaking inside 10 years, the installation is worth a look before you replace the whole thing. Call (844) 320-5930 for a free estimate on what actually needs replacing.
Often, yes. A fogged Sterling window is usually a glass-unit swap, a sticking door is a hinge and fit adjustment, and open trim miters can be reset without tearing out the wall. Full replacement makes sense when the frame is rotten, the unit is out of spec for a permitted addition, or an ADU fails egress and the opening has to be resized anyway. We’ll tell you which one you’re looking at in writing. Call (844) 320-5930 and we’ll review a competitor’s quote line by line at no charge.
An addition or ADU is a planned build, not a same-day job, and honest scheduling matters more than speed here. A garage conversion typically runs several weeks; a full addition or detached ADU runs months, driven by Glendale’s permit and inspection timeline and the finish schedule. We give you a written scope with the sequence before work starts, plus a photo record at each visit so you can see progress without standing over the crew. Call (844) 320-5930 for a free estimate and a realistic schedule.
We match the model label first, then source to that spec; we don’t stock parts and don’t carry them on a truck. For exterior doors and windows we stay with Sterling-spec components so the envelope matches; for interior slabs and trim we’ll use a same-spec equivalent when it’s faster and fairer on price. We also work with KraftMaid, Cambria and Silestone finishes where the project calls for them. Every quote spells out what’s OEM and what’s equivalent. Call (844) 320-5930 for a free estimate with the parts sourced and priced in writing.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












