A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Delta · Glendale

Delta Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new wood side gate with black hardware
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Kitchen Remodeling: The Glendale Owner’s Guide

Delta kitchen remodeling in Glendale runs $14,000 – $45,000 for a full kitchen, $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for countertops, and $800 – $2,500 for a backsplash, installed. We work on Delta-based kitchens as an independent service provider, not affiliated with Delta, and we put the number in writing before anyone picks up a tool. Call (844) 320-5930 for a free estimate.

Call (844) 320-5930

Most Glendale owners don’t wake up planning a remodel. They notice something first. A cabinet door that won’t stay shut because the hinge plate pulled out of particleboard softened by years of steam from a rice cooker and a dishwasher venting into the same corner. A drawer that drags on the frame once the summer heat swells the box. A countertop seam near the sink that has gone from a hairline to a dark line because water has been wicking under the edge for two seasons. In Glendale, a lot of this shows up in older homes in Adams Hill and Chevy Chase, where the original 1940s and 1950s kitchen boxes were never built for the appliances and cabinet loads we put in them now. The part failed quietly. The remodel is what you do next.

Which Delta Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Delta is a plumbing fixture brand first, so the parts that come up in a kitchen remodel are usually the faucet, the pull-out sprayer, the soap dispenser, and the sink drain assembly. The compatibility question matters most on faucets. Delta’s kitchen faucets use a cartridge system, and the cartridge inside a single-handle model from the past two decades is not interchangeable with the two-handle or touch-activated versions. Before you buy anything, find the model number. It’s stamped on the escutcheon plate under the spout or on a sticker inside the cabinet under the sink. Write it down. Match it against the parts diagram for that exact model.

The aftermarket decision for Delta is different from most brands. Delta’s own replacement cartridges are widely available and reasonably priced, and the aftermarket equivalents vary a lot in quality. We’ve pulled cartridges out of Glendale kitchens where a cheap aftermarket unit failed within a year because the rubber seats were a different durometer than the OEM part. On a $30 cartridge, buy the OEM part. On a full faucet replacement, a quality aftermarket fixture from a brand we trust often makes more sense than chasing a discontinued Delta model. Where we do cabinet work around a Delta-based kitchen layout, we source KraftMaid, Cambria, and Silestone alongside the Delta fixtures. Every cabinet line has its own box depth and hinge spec, and those have to be measured, not assumed.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Kitchen Remodeling Is Failing

Here’s what owners actually describe when they call, and what each one usually points to.

  • The faucet drips when the handle is off. That’s a worn cartridge seat, not a loose handle. A drip that starts slow and gets steady means the rubber has hardened and the valve can’t seal. In Glendale’s hard water, this happens faster than the manufacturer’s spec suggests.
  • The pull-out sprayer loses pressure or dribbles. The diverter inside the sprayer head has clogged with mineral scale or the hose connection has loosened behind the cabinet. It’s usually a $20 – $60 part, but you have to get the model right or the new head won’t seat.
  • Cabinet doors sag or won’t close flush. Hinge screws have pulled out of the box, or the hinges themselves are worn. Once the screw holes are stripped, you’re not fixing this with a new hinge; you’re repairing the box or replacing it.
  • The countertop seam near the sink darkens or lifts. Water is getting under the edge. In Glendale’s older homes, this often traces to a failing caulk line, but if it’s gone on long enough, the substrate has swelled and the counter has to come up.
  • Drawers drag or the box feels loose. The drawer glides are worn or the box has swelled from moisture. Glendale’s summer heat and indoor humidity swings do this to particleboard boxes that were never sealed properly.

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

Here’s the honest range for Glendale, with the parts-and-labor transparency you should expect on any written quote.

  • Full kitchen remodel: $14,000 – $45,000. Cabinets, countertops, backsplash, plumbing fixtures including Delta replacements, and the labor to install them.
  • Small kitchen remodel: $9,000 – $20,000. Same scope, tighter footprint.
  • Cabinet installation: $4,000 – $13,000. Boxes, doors, hinges, glides, and the leveling and shimming that keeps them square.
  • Countertop installation: $2,000 – $6,500. Cambria and Silestone are both in this range; the number moves with edge profile, seam count, and sink cutout.
  • Backsplash installation: $800 – $2,500. Tile, membrane, and the setting materials.

What moves the number: cabinet box count and drawer stack, the countertop material and square footage, whether the sink and faucet need relocation, and whether the existing plumbing rough-in is reusable. The quote is a flat written price with a written scope and a written warranty. No work starts on a change until the change order is signed. The 365-Day Done Right Promise covers the installation itself: if it’s not done right, we make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can check yourself safely. Pop the cartridge out of a Delta single-handle faucet (shut the water off first, then pull the retaining nut and cartridge), look at the rubber seat, and see if it’s hardened or torn. Check the hinge screws on a sagging cabinet door by backing one out and seeing whether it bites. Those are look-and-see tasks, and they’ll tell you what you’re dealing with.

Where it goes wrong: replacing a cartridge without the right model number, stripping the escutcheon threads, or getting into cabinet box repairs without understanding that a stripped screw hole needs a proper fix, not a bigger screw. Glendale’s older kitchens often have plumbing rough-ins that don’t match the replacement fixture, and that’s where a simple swap turns into a wall opening. The 365-Day Done Right Promise applies to the work we do, and we’d rather you call than guess. Ring (844) 320-5930 and we’ll walk you through what to check before you commit to anything.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

How long does a Delta kitchen faucet cartridge last? A Delta kitchen faucet cartridge typically lasts 5 – 10 years, but in Glendale’s hard water, scale buildup can shorten that to 3 – 5 years. If you’re seeing a drip that’s gotten worse over a few months, the cartridge is the likely culprit. Call (844) 320-5930 for an estimate on replacement.

Can I repair a Delta faucet instead of replacing it? Yes, in most cases. A cartridge or seat replacement is usually $20 – $60 in parts and an hour of labor, and it solves the drip. Replacement makes more sense when the finish is worn through, the body is cracked, or the model is discontinued and parts are hard to source. We’ll tell you which one you’re looking at.

How long does a faucet or cabinet part swap take? A faucet cartridge swap is typically under an hour. A full faucet replacement runs 1 – 2 hours. Cabinet hinge and glide replacement depends on count; a single door is minutes, a full kitchen’s worth is a half day or more. Call (844) 320-5930 for an exact timeline on your job.

How do you source the right Delta part for my model? We start with the model number off the faucet or the underside of the cabinet, match it against the parts diagram, and confirm the spec before ordering. Where OEM parts are discontinued, we identify a compatible equivalent and tell you the tradeoff. Call (844) 320-5930 and we’ll take the model number from there.

Get a Written Price Before Anything Starts

If you have a Delta fixture that’s failing or a Glendale kitchen that’s ready for the next chapter, the first step is a free estimate. We’ll look at what you have, tell you plainly what we found, and put a written price and scope in front of you before any work starts. Our technicians have up to 19 years of experience, and the quote is flat, not hourly, with the 365-Day Done Right Promise behind the work. Call (844) 320-5930 to schedule your free estimate in Glendale.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashing

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch