A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Glendale

Moen Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Driveway & Pavers: The Glendale Owner’s Guide

If you own a Moen product in Glendale and the part tied to your driveway and pavers has failed, we install, replace and source Moen-compatible fixtures and hardscape components, and a typical driveway and pavers replacement in Glendale runs $5,000 – $18,000 depending on scope and material. We quote a flat written price before any work starts, so you see the number before a single paver is pulled. Most owners find out something has gone wrong the same way: a fixture at the driveway edge starts weeping, a paver course lifts or rocks underfoot, or a seam in the hardscape stops draining after rain. What looks like a cosmetic annoyance usually traces back to a component that gave out months earlier. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Moen.

Call (844) 320-5930

Which Moen Models This Apply To

A tile setter installing wall tile in a shower

Moen makes a wide range of outdoor and hardscape-adjacent fixtures, and the part number depends entirely on which model and finish you have. Before we order anything, we identify the exact model line from the fixture label, the finish code, and the physical measurements of the failed component, because two Moen models that look identical at the driveway edge can take different replacement parts.

The compatibility gotcha: Moen’s outdoor fixture lines have changed connection and mounting specs across production years, so a part that fits a recent model may not seat on a unit made even a few years earlier. We measure rather than assume. On the OEM-versus-aftermarket call, Moen OEM parts cost more but match the original spec exactly, while quality aftermarket equivalents can cost 20 – 40% less and work fine on non-critical components. For the parts that carry pressure or sit in constant weather exposure, we lean OEM. We also handle KraftMaid, Cambria and Silestone work where a project spans more than one trade. We don’t claim to stock parts or carry them on a truck; every part is sourced to your model before the visit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Driveway & Pavers Is Failing

Here’s what Glendale owners actually notice, and what it usually means underneath:

  • A fixture weeping at the driveway edge. Water pooling near a Moen fixture usually means a failed seal or cartridge, and standing moisture is the fastest way to undermine the base course under pavers.
  • Pavers rocking or lifting near the fixture. When the base under a paver gives way, the paver rocks because water has washed out the bedding sand. That washout often starts at a leaky fixture connection.
  • A seam that no longer drains. Glendale’s dry spells followed by heavy rain expose grading problems fast, and a fixture that’s shifted can redirect water into the wrong place.
  • Efflorescence or a white chalky bloom on the pavers. That bloom is salt drawn to the surface by trapped moisture, and trapped moisture near a Moen fixture points to a leak or a blocked drain.
  • Settlement dips within a paver field. A low spot that wasn’t there before means the subgrade is moving, and the cause is often a slow leak the fixture has been feeding for months.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Here’s what replacement and hardscape work runs in Glendale, quoted as a flat written price with the scope spelled out:

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700
  • Paver patio installation: $3,500 – $11,000

The range depends on square footage, base depth, whether old material has to be hauled out, and paver grade. A quote covers labor, materials, base prep and disposal, itemized line by line. Any change to the scope needs a signed change order before work proceeds. The install carries our 365-Day Done Right Promise in writing.

DIY or Call Us?

You can safely check a few things yourself: confirm the Moen model from the label, note where the moisture is coming from, photograph the rocking pavers, and check whether the fixture connection is tight. Anything that requires lifting pavers, cutting out base material or re-grading a slope is where DIY goes wrong, because a re-set paver that isn’t bedded correctly will rock again within a season, and a fixture that isn’t seated to spec will keep feeding water into the base. There’s no high-tension or electrical hazard on this work, so it isn’t dangerous, but the margin for error is small. Call (844) 320-5930 for a free estimate, and bring any written quote from another contractor for a free second opinion.

FAQs

A remodeled family room with new windows and a window seat

How long does a Moen driveway and pavers installation last in Glendale?
A properly installed paver driveway and fixture setup typically lasts 20 – 30 years with sealing every few years, though Glendale’s dry summers and heavy winter rain cycles punish a poor base. The base prep is what decides lifespan, not the paver.

Can the failed part be repaired instead of replaced?
Often yes. A weeping fixture or a single rocking paver is usually a repair, not a full replacement, and we’ll tell you which one you’re looking at before quoting. Call (844) 320-5930 and we’ll walk you through it.

How long does the swap take?
A single fixture or paver repair is often a same-day job; a full paver field re-set can run two to four days. We give you the timeline in the written quote so there are no surprises.

How do you source the Moen-compatible part?
We identify your exact Moen model from the label and finish code, then order the correct OEM or quality aftermarket part to that model. We don’t stock parts or carry them on a truck, so the part is confirmed to your unit before the visit.

Whether it’s a weeping Moen fixture undermining your driveway or a full paver replacement, we quote a flat written price before any work starts and back the job with the 365-Day Done Right Promise. Call (844) 320-5930 for a free estimate, and bring any written quote from another contractor for a free second opinion.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA standing-seam metal roof over a covered porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch