







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Answer-first, model-by-model, and honest about the price. Here is the page.
Kohler Roofing: The Glendale Owner’s Guide
Quick answer: Kohler does not manufacture roofing. If you searched for “Kohler roofing” in Glendale, the reader almost always has one of two things: a Kohler product under a roof problem (Kohler skylight flashing kits, roof windows, and their accessory line) or a mismatched part someone sold them as “Kohler-compatible.” Our crews install and repair residential roofing in Glendale from $8,000 – $20,000 for a full replacement and $400 – $1,800 for a repair. Rowan Construction Group is an independent contractor and is not affiliated with Kohler. Call us for a written price before anyone picks up a tool.
Owners usually find this out the same way. A ceiling stain appears after the first rain in the fall. The skylight above the hallway is shedding water, and the label on the frame says Kohler. Or a roofer quoted a “Kohler roof window replacement” and the number was double what the part should cost. Either way, the question is the same: what do you actually need, and what should it cost in Glendale?
Key takeaways
- Kohler’s roof-adjacent products are skylights, roof windows, and flashing accessories, not shingle systems. The “roofing” fix is the flashing and seal around that unit.
- Roof repair in Glendale runs $400 – $1,800. Full replacement runs $8,000 – $20,000. Neither price is a guess; both come in writing before work starts.
- The most common failure at a Kohler skylight is not the glass. It’s the flashing and the roof cement around it.
- You get a documented photo record on every visit, so you can see what we found before you agree to the price.
Which Kohler Models This Applies To

Here’s the honest map. Kohler’s skylight and roof window line has been distributed in North America through partnership brand labels, so you’ll see Kohler stamped on skylight frames and dome units more often than on shingles. The model tag is usually a small foil or etched sticker on the inner frame face, not the curb. Read it from inside the room with a flashlight. It will carry a K-number or a series code and, on older units, a glass type code (tempered, laminated, or low-E).
A few compatibility points that trip people up:
- Curb size vs rough opening. A Kohler skylight that fits a 22 1/2-inch by 22 1/2-inch rough opening will not drop into a 21 1/2-inch curb. Measure the rough opening in the roof deck, not the visible frame. This is the number to match.
- Flashing kits are model-paired. The flashing for a curb-mount unit is not interchangeable with a deck-mount unit, even on the same glass size. Using the wrong flashing in Glendale is the number one cause of repeat leaks on the same skylight.
- OEM vs aftermarket. For a Kohler roof window, OEM is worth it when the hinge, operator, or integral blind mechanism is the failed part. For a flat flashing repair, a quality aftermarket flashing kit from a roofing supply house does the job, and the price difference is substantial.
If the label is gone, we match by measuring rough opening, glass pane thickness, and operator style. We don’t stock Kohler parts and we don’t carry parts on a truck. We source them to your model.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Roofing Is Failing
Real symptoms, with the cause behind each:
- Water staining on the interior drywall around the skylight frame. The flashing has separated from the roof or the sealant has failed. Glendale sun bakes roof cement to a hard shell in two to three summers, then it cracks at the first thermal swing.
- Condensation on the inside glass in the morning. The seal between the glass unit and the frame has failed, or the unit is a single-pane that was never right for a conditioned room. The glass isn’t the problem; the seal is.
- The operator won’t close flush, or cranks hard. The hinge arm or operator gear is worn. On a roof window, this part can be replaced alone. The glass and frame usually don’t need to come out.
- Visible gaps at the flashing corners with daylight showing through. The counter-flashing has lifted. Left alone through a Glendale rainy season, this is the one that gets into your ceiling.
- Gravel or grit inside the curb on the roof deck. On a low-slope installation, roof gravel back-pitched and is holding water against the flashing. The flashing needs to be reset with correct pitch, not just resealed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Glendale install pricing on a Kohler roof window or skylight depends on the scope. Here’s what you can expect to see in a written quote:
| Scope | Glendale price range |
|---|---|
| Flashing and seal repair (no unit replacement) | $400 – $1,800 |
| Roof repair around a failing skylight | $400 – $1,800 |
| Full roof replacement (skylight reworked in place) | $8,000 – $20,000 |
| Roof window replacement with new flashing kit | Quoted to your model |
What drives the range: roof pitch, tile vs comp shingle, whether the flashing kit is available for your model, and whether the roof deck under the skylight needs repairing. We’ll show you the line items: parts, labor, flashing, disposal, and deck repair if any. No change proceeds until you sign a change order. Under Clause 1 of the Haven Standard, the price is written before anyone starts. You also receive our 365-Day Done Right Promise on the workmanship. If we said it would hold, and it doesn’t, we come back and make it right.
DIY or Call Us?
Roof work at height is the safety call. Here’s an honest split. You can safely, from the ground or a window: check interior ceiling for stains after rain, inspect the glass for cracks, test whether a roof window operator closes flush, and look for daylight gaps at the flashing corners from inside. Note what you find.
Where DIY goes wrong: getting on a wet or steep roof to reseal flashing. Falls from roofs are the most common serious injury in residential work, and a Glendale tile or comp roof can lose traction fast in morning dew. We don’t recommend it. Flashing that’s resealed wrong also leaks differently, which makes the next diagnosis harder. If you can see water intrusion, call (844) 320-5930. A written price is free, and our crew is background-checked and uniformed.
FAQs

Most Kohler roof units last 20 to 30 years on the glass and frame, but the flashing and the sealant around it rarely make it past 10 to 12 in Southern California. The sun is the main factor, not the rain. Glendale units that face south or west need flashing inspection about every five years. A repair is $400 – $1,800 and worth doing before a small leak becomes a ceiling repair.
Yes, in most cases. If the glass is intact and the seal is holding, a flashing reset and seal repair at $400 – $1,800 addresses the leak without touching the window itself. If the glass seal has failed and you’re seeing condensation, or the operator is broken, replacing that part or the unit is the right call. We’ll tell you which, on paper, before anyone starts.
Flashing repair around a skylight is typically a few hours. Roof window replacement with new flashing is a longer job, and we schedule it around weather. You’ll get the timeline in the written scope, and a documented photo record when the crew is done, so you can see what was found and what was replaced.
We source parts to your model number through our fifty-plus vetted brand relationships, and we’ll confirm the exact flashing kit and unit before ordering. We don’t stock parts and we don’t carry parts on a truck. We also handle KraftMaid, Cambria, and Silestone in other trades if you have an active remodel running. Ask us to match your existing line-item quote against a competitor’s quote, free of charge, before you commit.
Call (844) 320-5930 for a free estimate and a written price on Kohler roof window repair or replacement in Glendale. We answer calls 24/7 and we’ll text you a confirmation of the appointment.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












