







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Glendale Owner’s Guide
We build Cambria-surfaced home additions and ADUs in Glendale, and the installed price runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, with a written flat price and written scope before anyone picks up a tool. Cambria is quartz, not a machine, so what “fails” on an addition is usually the surface where the new square footage meets the old: a countertop or vanity top that has cracked along a seam, a piece cut for a remodel that no longer matches the slab you have, or a heat-sensitive run placed too close to a new range. Owners spot it as a hairline at the edge of a sink cutout, a dull ring where a hot pan sat, or a color that reads different in the addition’s new light. Call (844) 320-5930 for a free estimate.
Which Cambria Models This Applies To

Cambria sells quartz slabs by design line rather than by serialized “model,” so identification works differently than it does for a faucet or a garage door. What you match is the design name and slab batch: every Cambria slab carries a design name on the back, and natural variation between batches means a “Bridgewater” pulled today will not perfectly match a “Bridgewater” installed five years ago. For additions and ADUs, that matters because most Glendale owners are extending a counter run, adding a wet bar, or finishing an ADU kitchenette and want the new tops to sit beside the old without a visible clash. The practical answer is to plan a full-surface replacement for the room being extended, or to use Cambria in the addition and a deliberately contrasting surface at the junction – a decision we walk through line by line before the quote is written.
On the OEM-versus-aftermarket question: Cambria is the OEM, and there is no meaningful aftermarket equivalent because the material is proprietary quartz. What varies is the fabricator – the shop that templates, cuts, and edges the slab. A quality fabricator measures with a laser template, not a tape, and that single step is where most seams show up wrong. We source Cambria and describe the fabricator’s process in the written scope. We also work with KraftMaid, Silestone, and Kohler when a Cambria run is not the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
Quartz is hard, non-porous, and remarkably stable – but it is not indestructible. Here is what actually goes wrong, and why.
- A hairline crack at a sink or cooktop cutout. Quartz is strong in the field and weaker at an inside corner. A cutout made without a properly radiused corner concentrates stress, and the crack starts there, not in the middle of the slab.
- A dull or whitish ring where something hot sat. Cambria is resin-bound, and sustained heat above roughly 300°F can scorch the resin. Trivets are not optional on quartz.
- A seam that has opened or turned dark. That is usually adhesive failure or a substrate that flexed. Quartz needs a flat, fully supported deck; a cabinet run that settled after the addition went up will telegraph straight through the seam.
- Edges that chip at the dishwasher or sink. Chipping happens at an overhang without a support bracket or where the edge profile is too thin for the span. It reads as a small nick and grows.
- A color that no longer matches the room. Glendale additions often add windows and change the light completely. A slab that looked warm under old incandescent now reads grey under the new daylight – and no repair fixes that, only replacement or a deliberate design contrast.
If the crack runs from a cutout corner across a load-bearing span, stop loading that surface and have it looked at before it spreads. Call (844) 320-5930.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Cambria-surfaced work in Glendale prices by the project, and the number is a flat written price before work starts – not an estimate that drifts.
| Scope | Installed range (Glendale) |
|---|---|
| Home addition (with Cambria surfaces) | $45,000 – $130,000 |
| ADU construction (with Cambria surfaces) | $90,000 – $220,000 |
| Garage conversion (with Cambria surfaces) | $30,000 – $80,000 |
| Cambria countertop run (addition or ADU kitchenette) | $2,000 – $6,500 |
What moves the range: square footage, foundation and framing on hillside lots, MEP work, and the number of Cambria surfaces. The quote is itemized – slab, fabrication, install, and finish – so you can see exactly what the Cambria costs versus the framing. Every project carries our 365-Day Done Right Promise, and every visit includes a documented photo record as part of the job, not an add-on.
DIY or Call Us?
The honest split: an owner can check that the seam has not widened, that the overhang has a bracket under it, and that no hot pan has scorched a surface. Those are eyes-and-hands checks, and they take a minute.
Cutting, templating, and seaming Cambria is where DIY goes wrong. Quartz needs a wet saw with the right blade, a laser template for fit, and a fully supported substrate. A rough cut shows in the seam line permanently, and a seam made over a flexing cabinet will open again. This is not a spring-tension or electrical hazard, but the cost of a bad seam is the slab, and the slab is the expensive part. Bring us a competitor’s written estimate and we will review it line by line at no charge before you commit.
FAQs

How long does Cambria last on an addition or ADU? Cambria quartz is designed to last the life of the home with normal care, and it holds up well to Glendale’s dry interior air and seasonal swings. The failure points are heat, impact at cutouts, and a substrate that moves – not the material aging.
Can a cracked Cambria surface be repaired instead of replaced? A small chip at an edge can sometimes be filled and blended, but a crack that originates at a cutout corner usually cannot be repaired reliably and needs a replacement piece or a full-surface swap. We will tell you which one it is after we look at it.
How long does a Cambria top swap take in Glendale? A single counter run is typically a day for template and a day for install, with the slab fabricated in between. Cambria inside a larger addition runs with the project schedule and appears on the written timeline before work begins.
How do you source the Cambria for my project? We source directly through Cambria’s fabricator channel, match the design name and batch to the adjacent surfaces where possible, and describe the fabricator’s templating method in the written scope. If a batch match is not achievable, we say so and show you the contrast options before you sign.
Rowan Construction Group Glendale is an independent service provider and is not affiliated with Cambria.
Ready to put a number on it? Call (844) 320-5930 for a free estimate. We deliver a written flat price and written scope before any work starts, sign every change order before the change proceeds, and answer the phone with a live person 24/7. Under Clause 1 of The Haven Standard, the price is written before anyone starts – and that holds on every Cambria surface we touch in Glendale and nearby areas.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












