







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Roofing: The Glendale Owner’s Guide
Wellborn-compatible roofing work in Glendale runs $400 – $1,800 for a targeted repair and $8,000 – $20,000 for a full roof replacement, and we can typically get a technician out quickly to assess it. The tricky part is that Wellborn is a cabinetry brand, not a roofing one, so when a homeowner searches “Wellborn roofing,” what they usually own is a Wellborn kitchen or bath package and a roof that’s now failing above it, not a Wellborn-branded shingle. Others have a Wellborn-built home or a Wellborn-supplied roofing component from a builder spec, and they’re trying to match a part. Either way, the symptoms look the same: a brown ceiling ring after a winter storm, granules in the gutter, a soffit that’s gone soft to the touch.
Which Wellborn Models This Applies To

We want to be straight with you: Wellborn Cabinet, Inc. is a cabinetry and bath manufacturer based in Alabama, and its model lines (Premier Series, Aspire, Bristol, and similar) are cabinet families, not roof systems. There is no Wellborn shingle line, no Wellborn underlayment, and no Wellborn roof model number to look up. So when a Glendale homeowner calls us asking about “Wellborn roofing,” the real question is almost always one of two things: either your Wellborn cabinets are fine and the roofing above them needs work, or a prior owner told you the home had a “Wellborn roof” and you’re trying to confirm what’s actually up there before you spend money. We can answer both.
To identify what’s actually installed, we look at the shingle or tile itself. Asphalt shingles carry a manufacturer name embossed on the underside of the tab you can lift; tile manufacturers stamp the back of the tile. The label on the original underlayment wrapper, if it’s still in the attic, tells you the system. That’s the OEM question that matters here, because there’s no Wellborn-specific aftermarket to chase. If the part in question is a roofing component and not a cabinet, we source the correct matching shingle, tile, or flashing from the manufacturer whose name is actually stamped on it and match the existing color and profile. Where the existing product is discontinued, we find the closest current equivalent rather than forcing a mismatched patch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Roofing Is Failing
Glendale sits at the edge of the San Fernando Valley, and the combination of dry summer heat, occasional wind-driven rain, and tree canopy (jacaranda, ficus, eucalyptus) creates a specific failure pattern. Here’s what we look for:
- Granules in the gutters and at the downspout outlets. Asphalt shingle granules shed as the mat ages, and in Glendale’s heat cycle that loss accelerates. Granule accumulation means the shingle is nearing end of useful life, not that a single tab is bad.
- Ceiling rings or brown streaks after a storm. Water that shows up on the interior has usually been getting in for a while. The visible stain is the last step of a slow path, often a failed flashing around a valley, vent boot, or chimney, not a hole in the field of the roof.
- Cracked or missing tile after a wind event. Tile roofs are common in Glendale’s older neighborhoods, and a lifted tile lets water reach the underlayment. Underlayment, not tile, is what actually keeps water out on a tile roof, and it has a shorter lifespan than the tile itself.
- Soft or stained soffit and fascia. Rot in the soffit board usually traces back to a roof edge detail that’s letting water behind the fascia. It’s a roofing problem that presents as a trim problem.
- Visible sagging or a wavy roofline. A dip along the deck suggests compromised sheathing or a saturated underlayment layer, not just worn surface. That’s a deck-and-repair job, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what roofing actually runs in Glendale, drawn from what we quote on the ground:
- Roof repair (targeted leak, flashing, vent boot, tile): $400 – $1,800
- Tile roof repair (cracked or displaced tile, underlayment patch): $600 – $2,500
- Full roof replacement (asphalt shingle, typical single-family): $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000
What drives the range is deck condition, roof square footage, pitch, layer count (a second layer adds tear-off and disposal), and how many penetrations need re-flashed. What’s included in every Rowan quote: a written flat price and written scope before anyone starts, the tear-off and disposal line itemized, a photo record of what we found and what we did, and the 365-Day Done Right Promise. Under Clause 1 of the Haven Standard, the price is written before work starts, and no change proceeds without a signed change order. Free second opinion available on any written estimate you’re holding from another contractor.
DIY or Call Us?
You can safely walk the perimeter with binoculars, check the attic on a dry day for daylight and staining, clear the gutters, and photograph granule accumulation in a bucket for comparison. What you shouldn’t do is climb onto a pitched roof, pry up flashing, or attempt a repair near the ridge or a chimney on a steep slope. Roofing involves height, and a fall from a two-story Glendale roof is serious. If the problem is a ceiling stain or a missing tile you can see from the ground, call us at (844) 320-5930 for a free assessment before it gets worse. Estimates are free and the price you get is in writing before any work begins. We’re an independent service provider, not affiliated with Wellborn.
FAQs

Asphalt shingles in Glendale typically last 18 – 25 years, tile underlayment 15 – 20 years, and metal 40-plus. Glendale’s heat and the occasional Santa Ana wind event shorten the upper end. Call (844) 320-5930 for a free estimate.
Often yes. A localized leak or a cracked tile is a $400 – $2,500 repair, and a full replacement only makes sense when the deck or the majority of the roof surface is compromised. We’ll tell you which side of that line you’re on. Estimates are free.
A targeted repair is typically a half-day; a full shingle replacement on a typical Glendale home is two to four days including tear-off and disposal. We’ll give you a written timeline with the written price.
We match the manufacturer whose name is stamped on the existing product (or the closest current equivalent where it’s discontinued) and confirm the profile and color before ordering. Call (844) 320-5930 for a free estimate – the sourcing answer is in the quote.
If you’re a Glendale homeowner with a Wellborn kitchen or bath and a failing roof above it, we also work with KraftMaid, Cambria, and Silestone when a single project brings cabinetry and surfaces into the same conversation. Call (844) 320-5930 to schedule your free estimate – we’ll put the number in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












