







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Glendale Owner’s Guide
We install and repair Wellborn cabinetry and the kitchen systems around it in Glendale, and a full kitchen remodel there typically runs $14,000 – $45,000 depending on cabinet layout, countertop material, and whether the electrical or plumbing has to move. If you’re chasing a specific failed part – a broken hinge, a delaminating door, a drawer that won’t hold its glide – that can usually be scheduled as a focused repair visit rather than a full remodel, and the diagnosis comes with a written price before anyone touches a tool. Most Glendale owners discover the problem the same way: a cabinet door that suddenly hangs crooked, a soft-close drawer that slams, or a finish that has started to lift along the bottom rail near the sink. Call (844) 320-5930 and we’ll schedule a free estimate.
Which Wellborn Models This Applies To

Wellborn makes several cabinet lines – the Select, Premier, and Estate tiers, plus dedicated door styles and finishes within each – and the parts are not interchangeable across the whole catalog. The most reliable way to identify what you have is to open the door and look for the manufacturer label stuck inside the cabinet box or on the back of the door itself; it carries the series and the date code. If the label is gone, a tape measure does the job: door thickness on most Wellborn framed lines runs 3/4 inch, and the hinge pattern on concealed European-style hinges is drilled to a standard 35mm cup, which is how we match replacements. Wellborn’s own hardware differs from generic aftermarket hinges in the overlay dimension and the soft-close damping mechanism, so a $4 hardware-store hinge will physically fit and then fail to hold the door square within a season.
For Glendale kitchens built between roughly 2005 and 2020, we most often see Wellborn Select and Premier lines with plywood box construction and hardwood doors. On those, an OEM-matched hinge or glide is usually the right call; on the older particleboard-box lines, a quality aftermarket glide can be the honest, cheaper answer, and we’ll say so. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Wellborn, so we source parts to match your cabinet, not the other way around.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
- Doors that hang crooked or rub the frame. The hinge cup or the mounting plate screws have pulled loose from the cabinet side. It’s less a hinge failure than a fastener-and-substrate failure, and it gets worse every time the door swings.
- Soft-close drawers that slam shut. The damping mechanism inside the glide has worn out. On Wellborn’s soft-close glides this is a sealed part, not an adjustment, so the fix is a replacement glide matched to the drawer box depth.
- Finish lifting or bubbling along the bottom rail. Moisture wicking up from a sink cabinet or a slow leak behind the dishwasher. Glendale’s dry summers don’t cause this; a persistent damp spot does.
- Drawer boxes that rack or stick. The box has gone out of square, usually after being overloaded with cast iron or stacked cans. A new glide won’t fix a twisted box, so we check the box before quoting the part.
- Cracks at the door stile or center panel. Wood moves with humidity, and a door that was fit tight in a wet winter can split when the air dries out. Repairable on some lines, a door replacement on others.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Glendale, a kitchen remodel runs $14,000 – $45,000. If you’re replacing cabinets only, cabinet installation is $4,000 – $13,000. Countertop installation is $2,000 – $6,500, a backsplash is $800 – $2,500, and a kitchen island is $3,000 – $10,000. A focused part swap – a hinge set, a glide, a single door – sits at the low end of the cabinet range. What drives the number is whether the cabinet box is sound (a good box takes a new door; a failing box needs more), how many parts are involved, and whether the countertop or backsplash has to come off to reach the work.
Every quote names the part, the labor, and the warranty on the labor in writing, so you can see what you’re paying for line by line. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. The 365-Day Done Right Promise backs the work.
DIY or Call Us?
You can safely tighten a loose hinge screw, check the manufacturer label inside the cabinet, and measure a door to confirm its thickness and overlay. That’s diagnosis, and it’s useful. Where DIY goes wrong with Wellborn parts is in matching the overlay and the hinge cup depth – a hinge that’s close but not exact will hold for a few weeks and then pull the door out of square again, sometimes cracking the cabinet face in the process. We’d rather you stop at the measurement and let a technician match the part.
Our technicians have up to 19 years of experience, and every visit includes a documented photo record of what we found and what we replaced. Call (844) 320-5930 for a free estimate in Glendale.
FAQs

How long do Wellborn cabinet parts last? Hinges and glides on Wellborn soft-close lines typically last 10 to 15 years of daily use before the damping mechanism wears out; the cabinet box and doors outlast them by a wide margin. Glendale’s dry climate is gentle on wood, so the parts that fail first are almost always mechanical, not the finish. Call (844) 320-5930 for an exact quote – estimates are free.
Can a failing hinge or glide be repaired instead of replaced? Sometimes yes. A pulled screw hole can be reinforced, and an out-of-adjustment hinge can be reset. A worn-out soft-close glide cannot be repaired; it’s a sealed part. We’ll tell you which situation you’re in before quoting. Call (844) 320-5930 to schedule the look.
How long does a Wellborn part swap take in Glendale? A single hinge or glide set is usually a short visit; a run of doors or a drawer bank takes longer, and a door replacement that needs an OEM match adds lead time for the part to arrive. We confirm the timeline in writing when we quote. Call (844) 320-5930 for an exact estimate.
How do you source the right Wellborn part? From the manufacturer label or, if it’s missing, from the hinge-cup measurement, overlay, and door thickness. We also service KraftMaid, Cambria, and Silestone kitchens if your Glendale home mixes brands. Call (844) 320-5930 for a free estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












