







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Glendale Owner’s Guide
We install and service KraftMaid-compatible windows and doors in Glendale, and most exterior door replacements with hardwoods or insulated units run $4,500 – $15,000 installed, while impact-rated window packages land at $8,000 – $25,000. That price range covers the unit, hardware, trim, flashing, and labor, quoted as a flat written price before anyone starts. Most Glendale owners find us the same way: a door that no longer latches in summer, fog between window panes, or a patio slider that takes two hands and a shoulder to close.
KraftMaid builds cabinetry first, and its windows and doors are far less standardized than the cabinet line. That matters when a part fails. The hinge, the glass unit, the threshold, the operating mechanism, each is matched to a specific series and a specific opening size, and a generic replacement from a big-box shelf often fits the opening but not the mechanism. We quote the part against the model, not the shelf.
Rowan Construction Group Glendale is an independent contractor. We’re not affiliated with KraftMaid, and we don’t claim to be. We install and repair KraftMaid-compatible units sourced through our vetted supplier network, which also covers brands like Cambria, Silestone, and Kohler on the interior side.
- Key Takeaways
- Installed window and door replacement in Glendale runs $4,500 – $25,000 depending on unit type and count.
- Model and series ID is what determines whether a replacement part fits.
- Fogged glass, sticking latches, and failed sliders are the three most common failures we see.
- Every project gets a flat written price and a signed change order before work proceeds.
Which KraftMaid Models This Applies To

KraftMaid’s window and door catalog is organized by series, not by a single universal part number. When we quote a replacement, we start by identifying the series from the unit label, which is typically on the frame edge or jamb and lists the model code and the rough opening dimensions. If the label is gone, we measure the rough opening and the unit itself, note the glass spacing, and cross-reference the operating hardware. A hinged door and a slider in the same nominal width do not share hardware, and a double-hung and a casement in the same series do not share a sash mechanism.
The OEM-versus-aftermarket decision matters more here than in cabinetry. OEM parts match exactly and carry the manufacturer’s tolerances, but lead times on discontinued series can stretch. Quality aftermarket equivalents, sourced through our supplier network, fit the same rough opening and can be faster to land. What we won’t do is substitute a part that fits the opening but stresses the frame, because that’s how a repair turns into a re-install. We quote both options with their lead times side by side and let the numbers decide.
If you’re unsure which series you have, we can identify it from a photo of the label and the opening. That identification step is free, and it’s the difference between a $180 hinge replacement and a $4,500 door you didn’t need.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
Glendale’s climate is hard on exterior units in a specific way. The inland heat and the dry Santa Ana stretches expand and contract frames and seals more than many coastal buyers expect, and the failure pattern shows up in predictable places.
- Fog or condensation between the panes. The insulated glass unit has lost its seal and moisture is trapped inside. It won’t dry out on its own, and the fix is a new glass unit, not a wipe-down.
- A door that sticks in summer and swings free in winter. The frame or hinge is reacting to seasonal movement, or the hinge screws have lost bite in the jamb. Left alone, the hinge plate eventually pulls and the door sags.
- A patio slider that needs two hands and a shoulder. The rollers, track, or threshold have worn or collected debris. When the roller fails outright, the door can drop and bind the frame.
- Drafts or daylight at the threshold or weatherstripping. The seal has compressed or the threshold has dropped. This shows up as higher energy bills before it shows up as a visible gap.
- Water staining on the interior trim or drywall near a window. The perimeter seal or flashing has failed and water is getting behind the frame. This is the one to call on quickly, because a wet substrate is a much larger repair than a seal replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how Glendale pricing breaks down for the work we do. These are installed ranges, and every one of them is a flat written price with the scope spelled out.
| Work | Installed Range |
|---|---|
| Single window unit replacement | $450 – $1,400 per unit |
| Window replacement (multi-unit project) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Exterior door replacement | $1,200 – $4,500 per door |
| Patio slider replacement | $2,000 – $6,500 |
| Hardware and hinge/roller repair | $180 – $650 |
What drives the range: unit count, glass spec, whether the rough opening needs reframing, and how much trim and flashing work the opening requires. Parts and labor are itemized separately on the quote, so you can see what the hardware costs versus what the install costs. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right. That’s backed by The Haven Standard, with the terms written on the page, not an asterisk.
DIY or Call Us?
Some of this is genuinely safe to check yourself. Cleaning a slider track, tightening hinge screws that still have bite, replacing weatherstripping, and confirming the label on your unit are all reasonable. Put a straightedge on the frame and see if it’s plumb before you assume the door is the problem.
Glass unit replacement, threshold work, and anything that involves removing a unit from a rough opening are where DIY goes wrong. A window that comes out and doesn’t go back in square lets water behind the flashing, and in Glendale that water finds the drywall before it finds your attention. Impact-rated glass carries handling and anchoring requirements that aren’t a homeowner job. We’ll always tell you plainly when a part is safe to touch and when it isn’t.
If you’d rather not guess, call (844) 320-5930. A live person answers, and the diagnosis visit includes a documented photo record of what we found, included as standard.
FAQs

A well-installed unit typically holds its seal and hardware for 15 – 25 years, but Glendale’s heat and seasonal expansion shorten the glass seal’s life to roughly 10 – 15 years before fogging shows up. Hardware like rollers and hinges often needs attention sooner, in the 8 – 12 year range. Call (844) 320-5930 for an exact assessment of your unit.
Often yes. Fogged glass can get a new insulated glass unit without a full frame replacement, and failed hinges, rollers, and weatherstripping are usually repairable for $180 – $650 installed. Frame rot or a failed seal behind the flashing is where a full replacement becomes the honest answer. We’ll tell you which one you’re facing before any work starts.
A hardware or glass-unit repair is typically a same-visit job of one to three hours. A full window or door replacement runs one to two days per opening once the unit is on site, and lead time on the part itself depends on the series and whether it’s OEM or a quality aftermarket equivalent. We put the lead time in writing with the quote.
We identify your series from the label or the measured rough opening, then source through our vetted supplier network, which spans more than fifty brands including KraftMaid-compatible units, Cambria, Silestone, and Kohler. If an OEM part is discontinued, we quote a quality aftermarket equivalent that fits the same opening, with both options and lead times written side by side.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.
Call (844) 320-5930 for a free estimate. Every quote is a flat written price with a written scope and warranty before any work starts, and if you have a competitor’s written estimate, we’ll review it line by line at no charge.












