







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Glendale Owner’s Guide
KraftMaid-compatible roofing components installed in Glendale typically run $400 – $1,800 for repairs and $8,000 – $20,000 for a full roof replacement, priced in writing before any work begins. Glendale sits in a high-fire-severity zone where the Verdugo Mountains funnel Santa Ana winds across north-facing slopes, and that combination of wind uplift and summer heat cycling is what usually starts the failure. Most owners discover the problem the same way: a brown water stain spreading across a ceiling in the foothills above Glenoaks, granules collecting in the patio drain after a February rain, or a roofing contractor who won’t certify the assembly for a solar permit. We install and repair roofing assemblies for KraftMaid-era homes across Glendale under The Haven Standard.
Which KraftMaid Models This Applies To
KraftMaid is a cabinet and storage brand, not a roofing manufacturer, so “KraftMaid roofing” in practice means the roofing system on a KraftMaid-outfitted home: the sheathing, underlayment, flashing, and shingle layer above a kitchen or bath that was remodeled with KraftMaid cabinetry. The compatibility question is really about which roofing assembly was specified on the original build. In Glendale homes built or remodeled between 2005 and 2022, we commonly find one of three assemblies: a GAF Timberline or Owens Corning Duration architectural shingle over 30-pound felt or a synthetic underlayment; a clay or concrete tile over a 40-mil modified bitumen membrane; or, on steeper pitches, a standing-seam metal panel. Identify what you have before pricing anything. Pull the county assessor’s building record, look at the exposed shingle edge along the fascia (the fascia is the horizontal board the gutter attaches to) to count shingle layers, and photograph the drip edge. Two layers of architectural shingle is the maximum most Glendale residential codes allow before a full tear-off, and a third layer is a code violation, not a shortcut. On the OEM-vs-aftermarket decision: a KraftMaid-compatible flashing or vent boot from a GAF or Owens Corning system is functionally identical to the branded part at 20 – 40% less, and we’ll show you the spec sheet for both. What you should not do is mix manufacturers within one assembly – a GAF shingle over an Owens Corning underlayment voids both warranties.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Roofing Is Failing
Five symptoms we see constantly in Glendale, each with the underlying cause:
- Granules in the gutter or patio drain. The mineral granule layer on an asphalt shingle erodes from UV exposure, and when you see it collecting below a downspout, the shingle is near end of life. Inland Glendale summers accelerate this by roughly 15% compared to coastal air.
- Curling or clawing shingle tabs. Tabs that lift at the corners look like claws. This is wind uplift damage from Santa Ana events, and it opens the assembly to water intrusion at the next rain.
- Ceiling stains or attic sheathing discoloration. A brown ring on the ceiling or dark staining on the attic decking points to a failed flashing or a worn pipe boot, not usually the shingle field itself. Water travels laterally along a rafter before it drops, so the leak source is rarely directly above the stain.
- Daylight visible through the roof boards. If you can see light through the sheathing from inside the attic, the decking is compromised and the repair scope just grew. This is a structural signal, not a cosmetic one.
- A roofing contractor who won’t certify the assembly for a solar or ADU permit. Glendale requires a current assembly certification on many solar and ADU permits, and a roofer who declines to sign off is telling you the roof won’t pass inspection in its present condition.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices for Glendale, all quoted as flat numbers in writing before any work starts:
| Service | Price Range (Glendale) |
|---|---|
| Roof repair (flashing, boot, patch) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range is driven by pitch, square footage, layer count (a tear-off to bare sheathing costs more than a re-cover), and material. Tear-off and disposal are line-itemed, not buried. A written scope travels with the quote: number of squares, underlayment spec, flashing details, warranty term. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. If it isn’t done right within 365 days, the 365-Day Done Right Promise covers the fix. Bring a competitor’s written estimate and we’ll review it line by line at no charge as a Free Second Opinion.
DIY or Call Us?
Roofing is genuinely dangerous work: a fall from two stories is a life-changing injury, and Glendale’s steeper foothill pitches and afternoon heat make it worse. If the failure is at ground level – a downspout full of granules, a visible drip edge, a discolored fascia board – you can safely inspect and photograph it. That’s useful evidence when you call us. What we don’t recommend is climbing the roof to patch a flashing or replace a vent boot yourself, especially on a pitch above 6/12. People who try it usually make the leak worse by disturbing the surrounding shingles and then pay for a bigger repair. If you’ve spotted any of the five symptoms above, call (844) 320-5930 for a no-cost inspection and a written estimate; the photo record we leave you is standard, not an add-on.
FAQs

A 30-year architectural shingle like GAF Timberline or Owens Corning Duration realistically delivers 18 – 25 years in Glendale’s climate, not 30. The combination of inland summer heat and UV drives granule loss faster here than the manufacturer’s rated lifespan, so we tell customers to budget for replacement in year 20. Call (844) 320-5930 for a free inspection and honest assessment.
Yes, in many cases. Isolated flashing failures, a cracked vent boot, or a wind-damaged shingle section typically repair for $400 – $1,800 and extend the assembly’s life by years. If the shingle field is already granule-depleted or you have two layers with widespread curling, a patch is throwing money at a problem that needs replacement. Call (844) 320-5930 and we’ll tell you which situation you’re in.
A standard asphalt replacement on a typical Glendale 1,500-square-foot home runs two to four days, weather permitting; tile and metal take longer. Timing depends on pitch, layer count, and whether sheathing needs replacement. Call (844) 320-5930 for a written scope that names the days and the conditions.
We source roofing materials through our vetted network of GAF and Owens Corning suppliers and match the spec sheet to your existing assembly. KraftMaid is a cabinetry brand, so we don’t fabricate roofing parts in its name – we install compatible roofing components that meet the assembly spec, and we show you the spec sheet for both OEM and quality aftermarket options so the quote reflects honest numbers. Rowan Construction Group Glendale is an independent service provider and is not affiliated with KraftMaid.
Need a written number before anyone picks up a tool? Call our team for a free estimate at (844) 320-5930. We also service Cambria, Silestone, and Kohler installations across the seven trades we cover. Our technicians have up to 19 years of experience, and every crew member is background-checked before they arrive.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












