A Rowan company - serving Glendale, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Glendale

Dvele Construction Service in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A second-story addition that matches the existing roofline
A remodeled family room with new windows and a window seat
New architectural shingles with a clean valley
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Glendale Homeowners Choose Dvele Construction

We provide independent Dvele construction service in Glendale, CA. That means kitchens, baths, and roofs on factory-finished modular homes, planned around how a Dvele is actually built: panelized envelope assemblies, factory-set module seams, and the mechanical, electrical, and plumbing stub-outs Dvele installs before the modules leave the plant. We’re an independent service provider, not affiliated with or authorized by Dvele. Our technicians have up to 19 years of experience, every job gets a written flat price before anyone picks up a tool, and a live person answers (844) 320-5930 around the clock.

Call (844) 320-5930

Why Trust Rowan Construction Group Glendale for Your Dvele Construction?

A finished backyard cottage with a small covered porch

Dvele isn’t tract-framed. A Dvele home arrives with its envelope already closed, its weather barrier installed, and its MEP rough-ins stubbed at the module joints. A crew that treats it like a stick-built house will cut into the wrong part of a wall and re-flash a seam they don’t understand.

Our technicians work to the assembly Dvele designed, not to habit. We match seam tapes, weather barriers, and flashing to the factory detail. We terminate the electrical and plumbing fittings the module rough-ins were designed around instead of substituting whatever’s on the shelf. When a client asks for a warranty-safe scope, we read the Dvele documents with them and write the scope so the factory envelope and the mechanical core stay intact. Kitchen, bath, and roof work is planned around where the modules meet and how the home was sealed, not where a conventional framer would expect to find a stud.

That matters in Glendale specifically. A 1920s Spanish Colonial on Adams Hill and a 2023 Dvele set on a hillside lot need completely different paperwork, different sequencing, and different trades. We write the second kind of scope for the second kind of house.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Fix in Glendale

  • Module-to-module and module-to-foundation seams. Factory gaskets and weather barriers can compress or get disturbed during crane set. If site flashing isn’t redone to Dvele’s detail, moisture tracks into the wall cavity. In Glendale, a damp patch near an interior wall where two modules meet usually shows up a year or two after set, and it’s almost always a failed or disturbed seam gasket plus skipped flashing.
  • Factory MEP stub-outs at module joints. Rough-ins frequently need re-termination on site. Mismatched penetrations and unsealed sleeves around plumbing and conduit are a recurring source of air leakage and condensation, and they’re easy to miss because the visual finish looks fine.
  • All-electric Dvele systems. Heat-pump HVAC, heat-pump water heating, and the solar-and-battery interface all land with factory labeling that site trades misread. The result is undersized circuits, mis-piped condensate, or battery and inverter clearance violations found later during an inspection.
  • Post-delivery roof and envelope penetrations. Vents, skylights, and rooftop equipment added after delivery are the weak point on Dvele’s low-slope roof assemblies. Poorly flashed additions are where Glendale leaks show up first, especially after a heavy winter rain year.
  • Foundation-interface settlement. Dvele homes are often set on sites that needed grading and retaining work to make the pad. When a hillside pad shifts, the failure shows at the module-to-foundation seam before anywhere else, and it looks like a leak when the real cause is movement.

Dvele Parts & Our Repair-vs-Replace Approach

A framer checking new wall framing on a home addition

For Dvele work, we match the factory-specified envelope and MEP components: compatible weather barriers, seam tapes, flashing, and the electrical and plumbing fittings the module rough-ins were designed around. Generic substitutes compromise the assembly, and we don’t put them in a Dvele wall.

We don’t claim to stock Dvele parts locally. Parts are sourced per job, verified against the module’s as-built documents and factory labeling, then ordered before the schedule is set so the crew isn’t waiting mid-scope. Repair is almost always the right call for seams, flashing, and stub-out terminations. Full replacement only makes sense when a module’s envelope or mechanical core is genuinely compromised, and we’ll show you the condition that supports either conclusion before recommending it.

If you’ve had a damp seam or a rough-in flagged on an inspection, call (844) 320-5930. We’ll review it and put the repair scope in writing.

Our Dvele Service Process – Step by Step

  1. 1
    Diagnosis. We open the affected assembly or inspect the stated concern, photograph the condition, and identify whether the cause is a seam, a flashing detail, a stub-out, or the foundation interface. You get the photo record as a standard deliverable, not an add-on.
  2. 2
    Written scope and flat price. The repair or install is written with a flat price, a scope, and a warranty before work starts. Under Clause 1 of the Haven Standard, that number is written before anyone picks up a tool.
  3. 3
    Repair or install, to Dvele’s detail. Seam work is re-taped and re-sealed to the factory assembly. MEP terminations are re-done to the fittings the rough-ins were designed around. Roof penetrations are flashed to the low-slope detail, not a shingle-house shortcut.
  4. 4
    Testing and documentation. We check air and water tightness at the joint, verify circuit sizing and condensate routing on heat-pump equipment, and photo-document the closed assembly.
  5. 5
    Warranty and change-order discipline. No change proceeds without a signed change order, and the written warranty backs the work. The 365-Day Done Right Promise applies: if it isn’t done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Products We Service & Install in Glendale

A remodeled primary bathroom with a soaking tub and walk-in shower

We work on the full Dvele line as it lands on a Glendale site. That includes Dvele’s self-powered modular single-family homes, with their all-electric solar-plus-battery platform; Dvele modular ADU and backyard home units; Dvele prefabricated home additions and accessory structures; and Dvele custom-configured modular home shells delivered with factory mechanical, electrical, and plumbing rough-ins.

On those homes, our Glendale work centers on full kitchen remodeling, full bathroom remodeling, and roof replacement and installation, plus the seam, flashing, and stub-out repairs that keep the envelope intact. If your Dvele is an ADU or an addition tied to a main house, we scope both sides of the tie-in so the envelope stays continuous.

We Also Service These Brands

Rowan Construction Group Glendale isn’t single-brand dependent. We also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures, among more than fifty vetted material brands. That sourcing depth is why a Dvele kitchen quote carries honest numbers: we’re comparing real material lines, not inflating one to cover the others.

FAQs – Dvele Construction Service in Glendale

Service Glendale Price Range
Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Bathroom Remodel $9,000 – $28,000
Small Bathroom Remodel $5,000 – $12,000
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Roof Replacement $8,000 – $20,000
Roof Repair $400 – $1,800

Call (844) 320-5930 for an exact quote. Estimates are free, and we’ll review any written estimate you already have at no charge.

Book Your Dvele Service in Glendale, CA

Whether it’s a seam, a roof penetration, or a full kitchen or bath on your Dvele home, the first step is a written price. Call (844) 320-5930 for a free estimate anywhere in Glendale. Bring any estimate you already have and we’ll review it line by line at no charge. Estimates are free.

Written by the team at Rowan Construction Group Glendale.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch