







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose Unilock Construction
Unilock construction service in Glendale means installing, repairing and restoring Unilock paver driveways, patios and retaining walls so the system performs the way it was engineered to: a compacted aggregate base, correct slope for drainage, a locked edge restraint and polymeric joint sand working together. We’re an independent Unilock service provider, meaning we are not affiliated with, sponsored by, or authorized by Unilock. What sets our Unilock work apart is the base: we check depth, grade and soil before a single unit goes down, and we quote a written flat price before any work starts. Call (844) 320-5930 to schedule a free estimate.
Why Trust Rowan Construction Group Glendale for Your Unilock Construction?

Our technicians have up to 19 years of experience, and that time has been spent reading the things you can’t see once the pavers are down: base depth, compaction, soil type and where water wants to go. On a Glendale hillside lot, that read matters more than the pattern you pick.
We know the current Unilock line-up and its installation quirks. Brussels Block is a tumbled, dimensional paver that needs its joints filled and compacted in lifts, not dumped and swept once. Beacon Hill has a flagstone surface with irregular edges, so the border course and edge restraint have to be set deliberately or the field walks. U-Cara is a segmental retaining wall system that depends on geogrid and drainage gravel behind the blocks; skip either and the wall leans. Eco-Priora, and the permeable Titan and Thornbury lines, need open-graded aggregate underneath so water actually moves through.
We source Unilock units, matching polymeric sand and edge restraint from an authorized Unilock dealer so color lot and thickness match what’s already on your property. That’s what keeps a repair warranty-safe, and it’s why we don’t substitute generic sand or plastic edging on a Unilock job. Under Clause 1 of the Haven Standard, the price is written before anyone starts. Our Free Second Opinion on any written estimate applies here too: bring another contractor’s Unilock quote and we’ll review it line by line, no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Glendale
These are the failures we actually see on Unilock installs around Glendale, and what causes each one.
- Joint sand washed out or never compacted into a Brussels Block driveway. The sand is swept in, then needs water and a plate compactor to lock it. Skip that step and the pavers rock under a tire, sand migrates out, and weeds move into the joints. It’s a two-hour fix if caught early, a re-lay if the base has loosened.
- Paver settlement and heaving along a Beacon Hill patio edge. Almost always a base that was too thin or an edge restraint that was never installed. The patio’s interior can be perfect while the border course drops a half inch each winter.
- Efflorescence and salt bloom on darker Unilock units after the first wet season. That white powdery film is mineral salts rising to the surface because water is sitting under the field instead of draining away. On Glendale’s sloped lots, it usually means the base slope is wrong or there’s no drainage path at the low side.
- A U-Cara retaining wall bulging or leaning. When geogrid and drainage gravel weren’t installed behind the blocks, hydrostatic pressure builds and pushes the wall out. This one is structural, not cosmetic, and needs to be addressed before it moves further.
- Sunken paver fields after an atmospheric river winter. Glendale’s dry summers and heavy winter rain expand and contract the soil, and a base that wasn’t compacted in lifts gives way. You get a dip in the driveway and a puddle that stays for days.
Unilock Parts & Our Repair-vs-Replace Approach

Unilock pavers, wall units and their matching polymeric sand and edge restraints should come from an authorized Unilock dealer so color lots and thickness align with what’s already installed. We source parts per job and we don’t claim to hold local stock; what we do is specify the right matching product line and restraint before work begins. Generic sand and plastic edging are where most failures start, and we don’t use them on a Unilock field.
Repair versus replace comes down to one question: is the base still sound? If the paver field is intact and only the joint sand or a few units have failed, re-sanding and relaying beats a full tear-out every time. Replacement is warranted when the base itself is failing, which shows up as widespread settlement, rocking pavers or a border that won’t hold. We say which one it is in writing, with the reason. Call (844) 320-5930 for a free estimate and we’ll tell you straight.
Here’s the typical scenario. A Brussels Block driveway or Beacon Hill patio several seasons old starts to show sunken pavers, loose joint sand and weeds working up between the units. That pattern almost always points to inadequate base compaction, missing edge restraint, or drainage that lets water sit under the field. A qualified local installer pulls the affected field, checks base depth and slope, re-compacts and re-screens the aggregate, resets the Unilock units on the original pattern, locks the border course with proper edge restraint and re-fills the joints with polymeric sand.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We pull a few units, measure base depth with a probe, check the slope with a level, and photograph what’s underneath. You get the photo record on every visit, so you see the same thing we do before any number is written.
- 2
Repair or install plan. We specify the exact Unilock product line, edge restraint type and polymeric sand, then write a flat price with a written scope. On a driveway or patio, that scope spells out base thickness, compaction method and drainage.
- 3
Execution. Excavation, geotextile where it belongs, aggregate in lifts with a plate compactor, screed, set the units on pattern, cut the border, install edge restraint and lock it in. Joints get polymeric sand swept, watered and compacted until they’re flush.
- 4
Test and walk-through. We check for ponding, verify the slope away from the structure, re-check the border, and hand over the written warranty and photo record.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Glendale
We work across the Unilock range most Glendale homeowners have or are considering: Brussels Block for driveways and walkways, Beacon Hill for patios and pool decks, U-Cara for segmental retaining walls, and Eco-Priora along with the Titan and Thornbury permeable lines for driveways where stormwater management matters. Each line has its own base and joint requirements, and we spec them accordingly rather than treating pavers as one product. Whether it’s a new install or bringing an older field back, we quote the same way.
We Also Service These Brands
Unilock is one material family. Rowan Construction Group Glendale works across seven trades and more than fifty vetted brands, including KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures. If a project touches the driveway, a patio wall and the kitchen in the same go, you’re not handing off between contractors. One written price, one point of contact.
FAQs – Unilock Construction Service in Glendale

No. We’re an independent Unilock service provider and we are not affiliated with, sponsored by, or authorized by Unilock. We install and repair Unilock products and source them from authorized Unilock dealers, but we make no claim of manufacturer authorization, certification or partnership.
Yes, we source Unilock units, matching polymeric sand and edge restraints from authorized Unilock dealers so color lot and thickness match. We don’t substitute generic sand or plastic edging on a Unilock job, because that substitution is where most joint and border failures start.
A joint-sand re-fill or a small relaying job is typically a day. Pulling and resetting an affected field on a Brussels Block driveway or Beacon Hill patio usually runs two to three days. A full paver driveway installation runs several days depending on square footage and base depth. We put the timeline in the written scope before work begins.
Brussels Block, Beacon Hill, U-Cara retaining wall, and Eco-Priora including the Titan and Thornbury permeable lines, along with the matching polymeric sand and edge restraint each one needs. If you have an older line not listed here, call and describe it – the base and joint rules still apply.
Proper service using matching Unilock products and correct installation methods generally doesn’t void a Unilock product warranty, but the warranty terms are set by Unilock and by your original installer’s workmanship warranty, not by us. We read those terms before quoting so we don’t propose something that puts your coverage at risk.
It depends on scope, square footage and base conditions. Here are the flat ranges we work from, quoted in writing before any work starts:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (844) 320-5930 for an exact quote – estimates are free.
Book Your Unilock Service in Glendale, CA
Tell us what your Unilock driveway, patio or retaining wall is doing. We’ll inspect the base, photograph what’s underneath, and hand you a flat written price with a written scope and warranty before work starts. Call (844) 320-5930 to schedule your free estimate.
Written by the team at Rowan Construction Group Glendale.












