







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose Ameristar Construction
Rowan Construction Group Glendale provides independent Ameristar construction service in Glendale: we install, repair, and reface Ameristar Hallmark, Crestwood, Oakridge, and Value Line cabinetry, and we quote every job at a flat written price before a tool comes out of the box. We’re not affiliated with or authorized by Ameristar, and that independence is the point. When a repair beats a replacement, we say so.
Ameristar sits in the value-to-semi-custom tier of cabinet and building products, and most of the Ameristar calls we take in Glendale trace back to the same handful of causes: a slow supply-line drip that swelled a particleboard box, thermofoil peeling on the face that catches the afternoon sun, or a hinge pulling loose from a thin Crestwood side panel. Knowing which one you’re looking at cuts the guesswork out of the quote.
Why Trust Rowan Construction Group Glendale for Your Ameristar Construction?

Our technicians have up to 19 years of experience, and a good share of that time has gone toward Ameristar boxes, door fronts, glides, and hinges. We recognize the difference between a Crestwood stock run and a Hallmark semi-custom face without pulling a spec sheet. That matters because the failure you see is rarely the failure you have. A door that won’t close flush is usually a swollen box, not a bad hinge.
We use OEM-compatible parts, and when genuine Ameristar gates and glides are back-ordered or priced close to a custom match, we tell you and quote the aftermarket alternative. Service performed to spec doesn’t void a manufacturer warranty on the parts we don’t touch, and we document what we found and what we replaced on every visit. The 365-Day Done Right Promise sits behind the work either way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Glendale
These are the Ameristar issues Glendale owners call about, mapped to the series they usually belong to.
- Particleboard box swelling on Crestwood and Value Line cabinets. A slow drip from a dishwasher supply line or steam from a kettle run swells the melamine-faced box near the sink. Doors then misalign and the laminate delaminates at the edge. The leak is often years old by the time the box gives it away.
- Thermofoil and vinyl veneer peeling on door fronts. Glendale’s hot, dry summers and kitchen heat cycle the vinyl until it bubbles or lifts. The failure tends to start on east- and south-facing runs where sun hits the face directly through the window.
- Undermount glides and hinges pulling out of thin box sides. The Crestwood and Value Line boxes have limited screw bite. Repeated loading pulls the fasteners loose, and the drawer sags. Ball-bearing glides rated for the original door weight fix it; the same screws don’t.
- Finish checking and yellowing on Hallmark semi-custom faces. Semi-custom finishes on exposed faces can check or shift color where the sun hits. It reads as a defect but usually traces to UV exposure over a decade of Glendale light.
- Oakridge bath vanities with soft toe-kicks. Bathroom moisture collects at the floor line and softens the toe-kick before anything else. The box behind it is usually intact, which is why we probe before we quote a replacement.
Ameristar Parts & Our Repair-vs-Replace Approach

For Ameristar cabinets, genuine door fronts and drawer boxes are often available, but the lead time runs long and the price lands close to what a local shop charges to mill a match. We pull the affected cabinet, confirm the source, then price both paths in writing. A quality aftermarket glide or hinge upgrade with a locally milled matching door frequently beats waiting on OEM. This is the honest call.
When box swelling or veneer failure has reached more than a few cabinets, patching one at a time stops making sense. Replacement with a better substrate costs less per cabinet over the run. We don’t stock Ameristar parts locally, so every part is ordered or milled per job and priced before it’s ordered. There’s no “call for a quote” step here. Call (844) 320-5930 and you’ll have a flat written number before the crew is scheduled.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We pull the suspect cabinet, check the supply line and drain for the slow leak behind the swelling, and probe the toe-kick and side panels for soft spots. We photograph the box interior, the leak point, and the affected faces.
- 2
Written scope and price. You get a flat price, a written scope naming the affected Ameristar series and components, and a written warranty before any work starts. If the scope changes once the cabinet is open, the change order is signed before we proceed.
- 3
Repair or install. We replace swollen boxes or re-box the run, fit OEM-compatible or aftermarket glides and hinges rated for the door weight, and reface or mill matching doors where the faces have failed.
- 4
Test and sign-off. Every drawer and door gets cycled and checked for flush alignment under load. You receive the photo record of what we found and what we replaced, and the 365-Day Done Right Promise covers the install.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Glendale
We work across the Ameristar lines Glendale owners actually have in their homes. The Hallmark series semi-custom kitchen cabinets get repair, refacing, and full install. The Crestwood series stock cabinets are the most common refacing candidate we see. The Oakridge series bath vanities come up in bathroom remodels, and the Value Line melamine-faced boxes are the ones most likely to need re-boxing after a leak. We install new Ameristar runs as part of a small or partial kitchen remodel and handle the countertop and backsplash that go on top. We don’t claim to stock any of it.
We Also Service These Brands
Ameristar isn’t the only line we handle, and being fluent across several keeps us honest about what’s worth keeping. We install and service KraftMaid and Wellborn cabinets, Cambria and Silestone countertops, and Kohler and Toto fixtures. If you’re weighing an Ameristar reface against a KraftMaid replacement on the same run, that comparison happens on paper before either gets ordered.
FAQs – Ameristar Construction Service in Glendale

No. We are an independent Ameristar service provider and are not affiliated with or authorized by Ameristar. That independence means we’re free to recommend a repair over a replacement when the repair is the better call, without a manufacturer’s warranty agenda driving the answer.
We use OEM-compatible parts and genuine Ameristar components where they’re available and priced sensibly. When a genuine glide or hinge is back-ordered or priced close to a custom match, we quote the quality aftermarket alternative in writing and let you decide. Call (844) 320-5930 for an exact quote on your run.
A single cabinet re-box or hinge and glide upgrade is usually a one-day job. A partial kitchen remodel runs one to three weeks depending on countertop lead time. You’ll get the timeline in writing with the price before we schedule, so the schedule isn’t a surprise.
We cover the Hallmark series semi-custom kitchen cabinets, the Crestwood series stock cabinets, the Oakridge series bath vanities, and the Value Line melamine-faced boxes. If you’re not sure which series you have, the box stamp or the door style usually identifies it, and we’ll confirm at the estimate.
Service performed to spec doesn’t void a manufacturer warranty on the parts we don’t touch. Where a repair touches a warranted component, we tell you before we proceed so you can weigh the warranty against the repair cost. Call (844) 320-5930 and we’ll walk through it for your specific cabinets.
Cabinet installation in Glendale runs $4,000 – $13,000, a small kitchen remodel $9,000 – $20,000, a full kitchen remodel $14,000 – $45,000, countertop installation $2,000 – $6,500, and a backsplash $800 – $2,500. Every quote is a flat written price before work starts. Call (844) 320-5930 for an exact quote. Estimates are free.
| Service | Glendale Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Yes, when the boxes are solid. If the particleboard is dry and the sides hold a screw, refacing with new doors and drawer fronts is the lower-cost path and keeps the existing footprint. A Glendale homeowner with ten-year-old Ameristar Crestwood cabinets who notices doors no longer close flush and a toe-kick soft to the touch usually has a slow leak, not a box beyond saving. A qualified pro pulls the cabinet, confirms the leak, and refaces once the source is fixed. Call (844) 320-5930 and we’ll probe the boxes before quoting either path.
Usually age and UV exposure, not a manufacturing defect. Glendale’s hot, dry summers hit east- and south-facing kitchen faces hardest, and vinyl lifts at the seam once the adhesive ages. Replace the door fronts rather than chasing each peel. Call (844) 320-5930 for a quote on refacing the affected run.
You can get genuine Ameristar hinges and glides, but the lead time runs long and the price often lands close to a quality aftermarket upgrade. We quote both in writing. Call (844) 320-5930 and we’ll price the OEM part against the aftermarket before you decide.
It affects thermofoil and vinyl finishes on any brand, and Ameristar’s veneer faces are exposed to it. Glendale’s dry summers and kitchen heat cycle the vinyl until it bubbles, especially where sun hits through a window. Sealing and shading exposed faces buys time, but refacing is the real fix. Call (844) 320-5930 to assess your run.
You know by probing the box. If the particleboard is dry and firm and the sides still hold a screw, the cabinet can be saved. If the box is soft, delaminated, or swollen past the door line, it needs replacing or re-boxing. We check both before quoting. Call (844) 320-5930 for a free estimate.
Book Your Ameristar Service in Glendale, CA
If your Ameristar cabinets are peeling, sagging, or soft at the toe-kick, call (844) 320-5930 to schedule a free estimate in Glendale. You’ll get a flat written price, a written warranty, and a photo record of what we found before the crew finishes. No work starts until the number is on paper. The 365-Day Done Right Promise stands behind the install.
Written by the team at Rowan Construction Group.












