A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
M
Mr-Glass · Glendale

Mr-Glass Construction Service in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
New double-hung windows in a dining room
A new front entry door with glass sidelights
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Glendale Homeowners Choose Mr-Glass Construction

Rowan Construction Group Glendale provides independent Mr-Glass construction service in Glendale, covering frameless shower enclosures, semi-frameless hinged doors, sliding tub-shower doors, and custom-cut mirror and glass wall panels. What sets our Mr-Glass work apart is documentation: a flat written price before any work starts, a photo record of what we found inside the wall before we hang a single panel, and a signed change order if the scope moves. We’re an independent provider, not affiliated with or authorized by Mr-Glass. Call (844) 320-5930 for a free estimate.

Call (844) 320-5930

Why Trust Rowan Construction Group Glendale for Your Mr-Glass Construction?

A new casement window over a kitchen sink

Our technicians have up to 19 years of experience, and they work with Mr-Glass enclosure systems often enough to know the frame profiles by feel. That matters because Mr-Glass publishes its own fabrication specs, frame channels, and hardware schedules, and the installer has to read them correctly. A hinge template drilled upside down or a sweep cut two millimeters short is a call-back, and we’ve seen enough of them to skip the learning curve.

We source OEM-compatible gaskets, sweeps, hinges, and handle sets where the frame profile demands them. Where dimensions match cleanly, quality aftermarket seals do the job at a lower number on the quote. You’ll see which is which, line by line, before you decide.

Every visit includes a documented photo record as a standard deliverable, not an upgrade. If your enclosure was installed wrong before we arrived, the photos show the torqued glass or the un-shimmed wall in plain terms.

Warranty-safe service is the other half of the trust. Mr-Glass warranty terms generally require installation to spec, and drilling through a tempered panel edge or using an incompatible sealant can void coverage. We work within those limits and tell you plainly when a repair would jeopardize the warranty.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Fix in Glendale

  • Failed hinge and bottom-rail gaskets. Clear sealant and sweep gaskets degrade over a few years, and water finds the gap. On a frameless Mr-Glass panel it tracks onto the curb and behind the tile, which is where the real damage starts. The fix is usually new OEM-spec sweeps and re-sealing with neutral-cure silicone, not a new enclosure.
  • Edge chips at bore holes on tempered panels. Tempered glass drilled for handle or hinge hardware develops edge chips at the bore holes, and those chips can turn into a full shatter without warning. It’s the single most common cause of “my door just exploded.” Any chipped panel gets replaced, not patched.
  • Pitted anodized frames on hard-water baths. Cheap anodized finishes on semi-frameless units pit and chalk, especially around the bottom track where Glendale’s mineral-heavy water pools. Once the finish fails, the aluminum corrodes and the track loses its seal line.
  • Sagging doors from out-of-plumb walls. Glendale’s older half-bath and full-bath layouts often sit against original 1920s-1950s plaster walls that are out of plumb by more than a frameless door can absorb. When the factory hinge template sits wrong, doors sag and stop meeting the strike-side jamb. Fixing the plumb is part of the job, not an extra.
  • Sliding-door track wear. On Mr-Glass sliding glass tub-shower doors, the bottom track roller wears and the panel starts dragging. A dragging panel stresses the frame connections, and once the track is scored the seal line can’t be restored. Replacing the rollers early is far cheaper than replacing the assembly.

Mr-Glass Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

The decision to repair or replace comes down to three things: whether the panel is chipped, whether the wall can be shimmed to plumb, and whether the frame profile accepts standard parts. Mr-Glass-spec OEM gaskets, sweeps, hinges, and handle sets are the right call where the frame channel is proprietary. Quality aftermarket seals work when the dimensions match, and that keeps cost down.

What we don’t do is try to save a chipped tempered panel. Tempered glass can’t be drilled or polished safely once it’s installed, so a chip means a new panel. Honest advice on that saves homeowners from a shatter down the road. We don’t claim local parts stock or next-day availability, because we don’t carry inventory. Parts are sourced per job to the spec the enclosure requires.

Call (844) 320-5930 if you want a written price on repair versus replacement before you commit to either.

Our Mr-Glass Service Process – Step by Step

  1. 1
    Diagnosis. We check the enclosure for plumb, inspect the curb for slope, and photograph the hinge side, the bottom track, and any panel edge chips. The photo record goes to you.
  2. 2
    Written price. Before anyone touches the glass, you get a flat written price with a written scope. No “call for a quote.”
  3. 3
    Repair or install. Hardware gets replaced with Mr-Glass-spec parts where required. Walls get shimmed to accept the frameless panel properly. Custom-cut mirror and wall panels are measured to the opening, not the catalog.
  4. 4
    Test. We run water at full pressure for a set period and check for tracking behind the tile, door clearance on the strike side, and sweep contact along the curb.
  5. 5
    Warranty and documentation. You receive the written warranty and the completed photo record, and the crew leaves with the job signed. Any scope change needs a signed change order first. That’s Clause 1 of the Haven Standard, and it’s why our projects finish within a few percent of the agreed price.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Products We Service & Install in Glendale

We work across the Mr-Glass line that Glendale homeowners have in their bathrooms right now: frameless fixed-panel shower enclosures, semi-frameless hinged shower doors, sliding glass tub-shower doors, and custom-cut mirror and glass wall panels. Each has its own frame profile, hardware schedule, and seal spec. A frameless panel and a sliding unit fail in different places, so the diagnosis differs. For walk-in conversions and tub-to-shower work, the enclosure usually needs custom measurements rather than a stock size, which is where the wall-plumb check comes in.

We Also Service These Brands

Rowan Construction Group Glendale isn’t tied to one catalog. Alongside Mr-Glass, we service and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures. That range lets us price a bathroom job against competing enclosure options honestly, and lets us finish the surrounding work – vanity, countertop, tile – with the same written-price discipline.

FAQs – Mr-Glass Construction Service in Glendale

A remodeled kitchen with a waterfall island and wood cabinets

Service Price range
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Shower Replacement $3,000 – $8,500
Bathroom Vanity Installation $800 – $3,000

Actual cost depends on panel size, hardware, whether the wall needs shimming to plumb, and whether the curb needs rebuilding. Call (844) 320-5930 for an exact quote – estimates are free.

Book Your Mr-Glass Service in Glendale, CA

Whether your frameless enclosure is leaking at the hinge or your sliding track has scored past saving, you’ll get a flat written price and a photo record of what we found. Estimates are free, and we’ll review a competitor’s written quote line by line at no charge. Call (844) 320-5930 to schedule.

Written by the team at Rowan Construction Group Glendale.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new black aluminum pool fence with a gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch