







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose CWS Construction
We provide independent CWS construction service in Glendale, CA: cabinet repair, refacing, replacement, and full kitchen remodeling on CWS (formerly Custom Woodwork & Specialties) cabinet lines. What sets our CWS work apart is pattern familiarity. CWS lines show up in a large share of Glendale’s mid-century and 1980s – 2000s kitchens, so we’ve seen the same door styles, hinge failures, and finish problems hundreds of times. We’re not affiliated with or authorized by CWS. We’re an independent provider, and we say so plainly. The advantage isn’t a factory badge. It’s knowing exactly how these boxes are built and where they fail.
Why Trust Rowan Construction Group Glendale for Your CWS Construction?

CWS built cabinets across several construction types over the decades: framed and frameless laminate and thermofoil lines, wood-veneer and painted MDF door styles from the 1980s through the 2000s, vanity lines in mid-century and tract-home bathrooms, and semi-custom runs sized for the small galley kitchens common in Glendale’s pre-war and post-war homes. Our technicians have up to 19 years of experience and read those construction differences before anyone touches a tool. A frameless thermofoil box and a framed veneer box need different repair approaches, different hinges, and different expectations about what survives another ten years.
We use OEM or exact-match CWS door and drawer fronts and hardware where the box is sound, and quality aftermarket hinges, slides, and touch-up finishes where CWS has discontinued a part. That keeps your service warranty-safe: we don’t drill new hinge patterns into a box that’s still under any manufacturer coverage without telling you first. Under Clause 1 of the Haven Standard, you get a written price before any work starts, with a written scope and a written warranty. No work proceeds on a change until you’ve signed the change order. And our 365-Day Done Right Promise means if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Glendale
These are the five failures we see most often on CWS cabinets in Glendale homes. Each one has a real cause, and none of them are mysterious once you know what you’re looking at.
- Thermofoil and laminate door skins peeling at edges and around pulls. On CWS thermofoil doors near the range or dishwasher, heat and moisture cycle daily, and the adhesive bond eventually lets go at the edges and around handle cutouts. Once a skin lifts, it doesn’t re-adhere reliably – the door front usually needs replacement or a matched CWS door, not a glue-and-clamp fix.
- Particleboard and MDF box swelling at sink bases and dishwasher openings. A slow supply-line or drain leak wicks into the substrate for months before anyone notices. The box swells, crumbles at the fastener points, and doors start to sag. This is the single most common CWS failure we open up in Glendale kitchens.
- European concealed hinge screws stripping out of aged particleboard. CWS used European concealed hinges across much of its frameless line. After 20-plus years, the screw holes in particleboard wallow out, the door droops, and it stops self-closing. The fix is re-hanging on new hinges set into solid material – not just tightening the old screws.
- Painted and veneer finishes yellowing, chalking, or checking. Cabinet faces that catch direct afternoon sun through Glendale kitchen windows take a beating. Painted MDF and wood veneer both yellow and check under that UV load, especially on south- and west-facing runs. Sometimes it’s a refinish; sometimes the face is too far gone.
- Sagging, out-of-square semi-custom runs in small galley kitchens. In Glendale’s pre-war and post-war galley kitchens, CWS semi-custom runs were often fit tight to walls that have since settled. Doors rack out of square and drawers bind. Re-hanging and re-shimming gets most of these working again before anyone talks about replacement.
A typical CWS kitchen call starts with doors that no longer close flush and a faint musty smell under the sink; pulling the cabinet reveals a swollen particleboard base and a slow supply-line drip that has been wicking for months. The usual cause is MDF or particleboard box construction combined with an unrepaired leak, and a qualified pro will cut out and rebuild the sink base, match or replace door fronts, re-hang doors on new hinges set into solid material, and address the plumbing before reinstalling. When the damage is limited to one base cabinet, a partial rebuild is the practical path. When several boxes are soft, full cabinet replacement is the honest recommendation.
CWS Parts & Our Repair-vs-Replace Approach

We don’t claim to stock CWS parts locally. CWS has changed hands and discontinued lines, and no independent shop holds a warehouse of old door fronts. What we do is source each job specifically: OEM or exact-match CWS door and drawer fronts and hardware when they’re still available, and quality aftermarket hinges, slides, and touch-up finishes when OEM is gone. When a part has to be matched, we tell you the lead time in the written quote before you commit.
The repair-versus-replace call is where most homeowners get sold the wrong thing. The rule we work by: if the box is sound, repair and reface. If the boxes are swollen or delaminated, replace rather than reface, because new skins over failing substrate just move the problem forward a year or two. We’ll tell you which side of that line your CWS cabinets are on, in writing, with the price attached. Call (844) 320-5930 for a free estimate on your CWS cabinets in Glendale.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We identify your CWS construction type – framed or frameless, laminate, thermofoil, veneer, or painted MDF – and check the boxes, not just the doors. Swollen substrate, soft sink bases, and stripped hinge holes all get documented.
- 2
Written price and scope. Before any work starts, you get a flat written price with a written scope and a written warranty. If you’ve got a competitor’s CWS quote, we’ll review it line by line at no charge through our Free Second Opinion offer.
- 3
Repair or install. Sink bases get cut out and rebuilt, door fronts get matched or replaced, hinges get re-set into solid material, and plumbing gets addressed before anything goes back together. No change proceeds without a signed change order.
- 4
Test and document. Doors get checked for self-close and flush fit, drawers for bind, and countertop seating for level. Every visit includes a documented photo record as a standard deliverable – you keep evidence of what was found and what was done.
- 5
Warranty. The work is backed by our 365-Day Done Right Promise. If it’s not done right within that year, we make it right.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Glendale
We service and install across the CWS product families you’re most likely to have in a Glendale home: framed and frameless laminate and thermofoil cabinet lines; wood-veneer and painted MDF door styles from the 1980s – 2000s; vanity cabinet lines in bathrooms; and semi-custom cabinet runs sized for small galley kitchens. On the countertop side, we set new quartz and granite over sound CWS boxes, which means checking level and substrate first. We also handle backsplash and island work as part of a full kitchen scope. If you’re not sure which CWS line you have, we’ll identify it during the estimate.
We Also Service These Brands
We work on CWS and we work on the rest of what’s in Glendale kitchens, so you’re not stuck with a single-brand specialist. We service and install KraftMaid and Wellborn cabinets, set Cambria, Caesarstone, and Silestone countertops, and work with Kohler and Toto fixtures on the plumbing side. That breadth means honest advice about whether your CWS cabinets are worth keeping next to newer components – and a written price that reflects the whole scope, not just one trade.
FAQs – CWS Construction Service in Glendale

No. We’re an independent CWS service provider, not affiliated with or authorized by CWS. Our expertise comes from pattern familiarity with CWS lines across Glendale kitchens, not from a factory relationship. Call (844) 320-5930 for a free estimate.
We use OEM or exact-match CWS door and drawer fronts and hardware when they’re available, and quality aftermarket hinges, slides, and finishes when CWS has discontinued a part. The written quote tells you which parts are OEM and which are aftermarket before you commit. Call (844) 320-5930 to talk through your specific cabinets.
Most single-cabinet repairs – a rebuilt sink base, re-hung doors, matched door fronts – finish in one to two days once parts arrive. Full cabinet replacement or a kitchen remodel runs longer, and the written scope gives you a real timeline. If a part needs matching, we state the lead time up front. Call (844) 320-5930 for a free estimate with a written timeline.
We cover framed and frameless laminate and thermofoil CWS lines, wood-veneer and painted MDF door styles from the 1980s – 2000s, vanity cabinet lines, and semi-custom runs in small galley kitchens. If you’re unsure which line you have, we identify it during the estimate. Call (844) 320-5930 to book one.
Independent service doesn’t automatically void a CWS warranty, but the terms depend on your specific cabinet line and what’s covered. We tell you before we drill, reface, or replace anything whether the work touches a warranty concern. Call (844) 320-5930 and we’ll walk through it.
CWS cabinet and kitchen work in Glendale runs from $800 for a backsplash to $45,000 for a full kitchen remodel, depending on scope. Here are the line-item ranges we quote:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (844) 320-5930 for an exact quote on your CWS cabinets – estimates are free, and the price is written before any work starts.
Glendale’s hillside construction adds its own wrinkle to CWS cabinet work. Homes in Adams Hill and Chevy Chase often sit on slopes where settling shifts the boxes out of square over decades, and the Verdugo Mountains and San Rafael Hills put seismic movement in the mix. CWS installed in the 1980s and 1990s has been through a lot of settling since. We check for out-of-square boxes during diagnosis because a door that won’t close flush is sometimes a hinge and sometimes the whole box has moved. When a hillside home needs more than cabinet repair – a foundation issue under a kitchen, or a slope problem that’s racking the framing – we tell you, because a cabinet fix over a moving floor won’t hold. Glendale’s hot, dry summers and heavy winter rains also cycle humidity in kitchens, which is why sink-base leaks and thermofoil edges fail faster here than in drier climates.
Book Your CWS Service in Glendale, CA
Call (844) 320-5930 to schedule a free estimate on your CWS cabinets or kitchen in Glendale. You’ll get a written price before any work starts, a documented photo record on every visit, and the 365-Day Done Right Promise on the work. Bring a competitor’s quote if you have one – we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Glendale.












