







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Installation Really Costs in Glendale, CA - and Why the Per-Foot Price Changes in an Older Kitchen
Cabinet installation in Glendale typically runs $4,000-$13,000 for a standard kitchen, which works out to roughly $80-$480 per linear foot depending on the tier you choose. Plain stock cabinets land near the bottom of that range. KraftMaid semi-custom cabinets cost $180-$340 per linear foot in a new-construction kitchen, and full-custom Wellborn cabinets with a 6-8 week lead run $260-$480 per linear foot. If your kitchen is in a 1920s-1940s Spanish Colonial, add the wall-condition variable below. Call (844) 320-5930 for a written price on your exact layout - the quote is free, and it comes before any work starts.

Why the Numbers You Find Online Come Up Short in Glendale
Most cost guides quote a per-linear-foot figure as if every kitchen wall were dead plumb. In Glendale, that assumption breaks fast. The plaster walls in pre-1950 homes across Adams Hill and Chevy Chase move with temperature swings and with seismic activity, and a stretch of wall that reads flat to the eye is often 0.5-2 inches out of plumb over a 10-foot run. Cabinets are built square. Walls, in these houses, are not.
Making a square cabinet sit clean against a wavy plaster wall means custom scribe molding, filler strips, and blocking behind the cabinet backs. That’s real labor, and it adds $15-$30 per linear foot to any semi-custom or full-custom job in a pre-1960 Glendale kitchen. The same KraftMaid cabinet that costs $180-$340 per foot in new construction runs $210-$390 per foot here. The gap you’re paying for is the work that makes the gap between cabinet and wall disappear.
This is the part of the trade no generic cost range will show you. It’s also the part a contractor who has actually hung cabinets in Glendale’s older housing stock can price for you up front - under Clause 1 of The Haven Standard, the price is written before anyone starts.
The Three Tiers, and What the Price Difference Actually Buys
Cabinet cost comes down to how much of the box is built to your kitchen versus cut to a stock standard. The trade-off isn’t just money - it’s lead time and how much slack the installer has when a wall isn’t square.
- Stock (Home Depot or IKEA): $80-$140 per linear foot installed, 2-3 week lead. Fixed sizes, minimal filler options. In an out-of-plumb Glendale kitchen, stock cabinets are the hardest to scribe cleanly because the supplier gives you no room to adjust.
- Semi-custom (KraftMaid): $180-$340 per linear foot installed, 3-4 week lead. Sized to your space, with filler and molding options that absorb the wall gap. The sweet spot for most Glendale kitchens we quote.
- Full-custom (Wellborn): $260-$480 per linear foot installed, 6-8 week lead. Every dimension is a decision, including the curve of a plaster wall. You pay for both precision and a longer wait.
Lead time is the trade-off people underestimate. A stock order moves in two weeks; a custom order eats six to eight. If you’re only installing cabinets and not gutting the room, that timeline is the whole project. Pair the cabinet work with a full Kitchen Remodeling and the schedule overlaps with countertop and finish work instead of standing alone.

What “Installation” Includes - and What It Doesn’t
Half the cost confusion in Glendale comes from comparing quotes that don’t cover the same work. A “hang-only” quote and a full-service quote can differ by thousands of dollars for reasons that have nothing to do with the cabinets.
A Rowan quote includes level layout, wall blocking, cabinet hanging, interior shelf installation, and door and drawer adjustment. It excludes countertop installation, under-cabinet lighting rough-in, and hardware installation - each quoted separately so you’re comparing like to like. Those exclusions line up with the standalone ranges we publish: countertop installation in Glendale typically runs $2,000-$6,500 with Silestone or Caesarstone quartz, and a kitchen island adds $3,000-$10,000 if you’re building one. A backsplash is a separate $800-$2,500. Hardware finishes, including Moen and Kohler pulls and fixtures, get their own line.
Ask any contractor whether their cabinet quote includes wall blocking. It’s the tell. Blocking is what lets the cabinet carry weight properly in older plaster-and-lath walls, and it’s the first thing a hang-only quote drops to keep the number low.
Cabinet Installation Cost in Glendale: Line-Item Ranges
Here are the ranges we work from in Glendale. Your written quote will land inside these, and it will name the wall-condition adjustment separately if your kitchen needs it.
| Line item | Glendale range |
|---|---|
| Stock cabinet installation (Home Depot / IKEA) | $80-$140 per linear foot |
| Semi-custom cabinet installation (KraftMaid) | $180-$340 per linear foot |
| Full-custom cabinet installation (Wellborn) | $260-$480 per linear foot |
| Out-of-plumb wall adjustment (pre-1960 Glendale kitchens) | +$15-$30 per linear foot |
| Standard kitchen cabinet installation, total | $4,000-$13,000 |
| Small kitchen cabinet installation | $9,000-$20,000 (full small-kitchen remodel) |
| Countertop installation (Silestone / Caesarstone) | $2,000-$6,500 |
| Kitchen island installation | $3,000-$10,000 |
| Backsplash installation | $800-$2,500 |
Full kitchen remodels in Glendale run $14,000-$45,000 for the whole scope, which is where cabinet, countertop, and finish costs get bundled into one project number. If you want the wider picture, the Rowan Construction Group home page lays out all seven trades.
Do You Need a Permit to Replace Cabinets in Glendale?
No - replacing cabinets in an existing footprint without plumbing or electrical changes does not require a permit in Glendale. The moment you move the sink or relocate the range and its electrical, you cross into permitted work. A plumbing permit applies for a sink move, and an electrical permit for a new circuit or a relocated range. Rowan includes permit cost as a named line item when it applies, so it never shows up as a surprise on the final bill.
This matters in Glendale more than in neighboring Burbank or Pasadena, because the building department enforces strict staging and seismic rules. Older soft-story and masonry construction in the hills often surfaces retrofit issues during a kitchen tear-out, which is why we look at what’s behind the wall before the order goes in, not after.
Does the 365-Day Done Right Promise Cover Cabinet Installation?
Yes. Door alignment, drawer glide adjustment, and soft-close hardware failure within 12 months of installation are covered under the 365-Day Done Right Promise - not billed as a separate service call. If a door drops out of square or a glide fails, we make it right. The guarantee is a written term, not a verbal reassurance.
Every cabinet visit also includes a documented photo record at no extra cost. You get photos of the blocking, the level readings, and the finished alignment, so you have evidence of what was found and what was done when the crew leaves.
FAQs
Cabinet installation in Glendale runs $4,000-$13,000 for a standard kitchen, or $80-$480 per linear foot depending on tier. Semi-custom KraftMaid sits at $180-$340 per foot, plus $15-$30 per foot if your walls are out of plumb. Call (844) 320-5930 for an exact quote - estimates are free and written.
It’s usually cheaper to reface or repair if the boxes and structure are sound - but not if the layout is wrong or the wall behind is failing. In a 1940s Glendale kitchen with out-of-plumb plaster, partial replacement often costs more than starting clean once the blocking is redone. We’ll tell you which applies before you spend. Call (844) 320-5930.
Installation itself usually takes one to two days for a standard kitchen once cabinets arrive - but the order lead time is 2-3 weeks for stock, 3-4 for semi-custom, and 6-8 for custom. We can’t skip the supplier’s timeline, and we won’t pretend to. Call (844) 320-5930 to lock in your order and install date.
A hang-only quote covers lifting the cabinet onto the wall and nothing more. A full-service quote includes level layout, wall blocking, hanging, interior shelving, door and drawer adjustment, and the photo record. In older Glendale homes, the blocking is the part that matters and the part a bare-bones quote leaves out.
Get Your Cabinet Price in Writing Before Anything Else
Rowan Construction Group Glendale quotes cabinets with a flat written price and a written scope before work begins, and no change proceeds without a signed change order. Our technicians have up to 19 years of experience, every crew is background-checked and uniformed, and a live person answers the phone 24/7. Bring a competitor’s quote and we’ll review it line by line for free. Call (844) 320-5930 for your estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale, CA.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












