







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Glendale, CA
Vanities, tile and fixtures are the three finish layers that decide how a Glendale bathroom looks and how long it lasts: the vanity cabinet and countertop, the floor and shower tile with its waterproofing membrane underneath, and the faucets, shower valves, drains and trim that connect the room to the plumbing. Most of our vanities, tile and fixture work in Glendale lands between $3,800 and $14,500 depending on square footage, tile selection and whether the shower is being rebuilt down to the studs. Call (844) 320-5930 and we’ll put a written, flat price in front of you before anyone picks up a trowel.
This page covers the finish scope specifically. If the project also involves moving a toilet, relocating a drain or reconfiguring walls, start with our Bathroom Remodeling page, because that work sits inside a full remodel rather than a finish upgrade. Our technicians have up to 19 years of experience, and every crew member is background-checked and uniformed before they arrive at your door.
Glendale has quirks that matter here. Much of the housing stock in Adams Hill, Rossmoyne and the numbered streets north of Colorado was built between 1920 and 1955, and those bathrooms were framed with 1×6 subfloor planks rather than plywood. Tile laid directly over planks cracks along the grout lines within a couple of seasons. We check the substrate before we quote tile, and the quote reflects what we actually found. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order.

Key Takeaways
- Vanity, tile and fixture packages in Glendale run roughly $3,800 to $14,500, with the shower rebuild being the biggest single swing.
- We name brands and model lines in the written scope: Wellborn vanities, Cambria and Silestone countertops, Kohler and Toto fixtures.
- Waterproofing membrane, not thinset, is what keeps a Glendale shower from failing. We specify it and photograph it before tile goes down.
- Crews are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as standard.
- Bring a competitor’s written estimate and we’ll review it line by line at no charge.
When You Need Vanities, Tile & Fixtures
- Grout lines that keep reappearing dark. In Glendale’s older bathrooms, discoloration along floor grout usually means water is getting under the tile, not sitting on top of it. Re-grouting hides it for a few months. Finding the source means pulling a tile and looking at the membrane.
- A shower pan that flexes or a caulk line that won’t stay sealed. Spring and summer temperature swings across the Verdugo foothills work on older shower pans, and a pan that moves will open its seal no matter how many times it’s caulked.
- A vanity that’s outlived its cabinet. Particleboard boxes from the 1980s and 1990s swell at the toe kick and around the sink cutout. Once the box is soft, replacing the countertop alone is money spent on a failing base.
- Faucets and valves that need to be replaced anyway. If you’re already opening a wall for tile, replacing a shower valve at the same time costs far less than doing it separately later. Kohler and Toto fixtures are standard in our written scopes.
- A powder room or hall bath that’s dated but structurally fine. Cosmetic finish work with no plumbing relocation is the most predictable version of this job, and the one we can price most tightly.
- Accessibility changes. Curbless shower entries and comfort-height vanities are common requests in Glendale households planning to stay put. Both are tile-and-fixture decisions, not structural ones.

Our Vanities, Tile & Fixtures Process
- Walkthrough and substrate check. We look at the subfloor, the wall framing behind the shower, the condition of the existing valve rough-in and the drain. We photograph what we find. That photo record is a standard deliverable on every visit, not an upgrade.
- Written scope and flat price. You get a flat price with a written scope naming materials, brands and model lines, plus a written warranty. If you have a competitor’s estimate, we’ll review it line by line at no charge before you decide.
- Demo and rough-in verification. Old tile and the vanity come out. We confirm the drain, valve and supply lines are sound before anything new goes in, because a $200 valve replacement is a much better outcome than discovering it after a $4,000 tile job.
- Waterproofing, then tile. Cement board or foam backer, then a bonded waterproofing membrane on the floor and walls, then tile. We photograph the membrane before the first tile is set so you have evidence of what’s under the finish.
- Vanity, countertop and fixture set. Cabinet set and shimmed level, countertop templated and installed, faucets and trim connected, drain tested. Any change to the scope gets a signed change order before work on it continues.
- Final walkthrough with the record. We hand over the photo record, the warranty in writing, and the signed paperwork. If something isn’t right, the 365-Day Done Right Promise covers a return visit.
Vanities, Tile & Fixtures Pricing in Glendale
Here’s what this work actually costs in Glendale, itemized. These are ranges, not a bait number, and the written quote you receive will be a single flat figure for the agreed scope.
| Line item | Typical range | What moves it |
|---|---|---|
| Vanity cabinet (36″ to 60″, Wellborn or comparable) | $900 – $3,200 | Width, door style, drawer configuration |
| Countertop (Cambria or Silestone quartz) | $700 – $2,100 | Linear footage, edge profile, sink cutout |
| Floor tile, installed with membrane | $1,400 – $4,200 | Square footage, tile format, substrate condition |
| Shower tile and pan rebuild | $2,800 – $7,500 | Curbless vs. curb, tile size, valve relocation |
| Faucets, shower trim, drain and supply lines | $600 – $1,800 | Fixture line, number of fixtures, valve condition |
| Full package, hall bath | $3,800 – $9,500 | Whether plumbing is relocated |
| Full package, primary bath | $7,500 – $14,500 | Shower size, tile selection, double vanity |
Large-format tile costs more to install than 12×12 because the substrate has to be flatter, and that flattening is real labor. A curbless shower in a 1950s Glendale home often means recessing the subfloor between joists, which is a framing task priced separately. None of this shows up after the fact on a Rowan job. Estimates are free, and the number you agree to is the number on the change-order ledger.
How Do You Choose Between Repairing and Replacing a Vanity?
Replace the vanity when the cabinet box itself is soft, swollen or separating; repair when the box is solid and only the doors, countertop or faucet are worn. Press on the toe kick and around the sink cutout. If the material gives or crumbles, no countertop will fix it. A solid box with dated doors is a much smaller job, and we’ll tell you which one you have after we look.
How Long Does a Vanity, Tile and Fixture Project Take in Glendale?
A hall bath vanity and floor tile swap typically runs 4 to 7 working days; a full package with a shower rebuild runs 8 to 14. The variable isn’t tile-setting speed, it’s what’s behind the wall. Older Glendale homes sometimes hide galvanized supply lines or a drain that needs reworking, and that adds days. We tell you before we start, not in the middle.
Can You Match Tile and Fixtures to an Existing Glendale Bathroom?
Sometimes, and we’ll say so plainly when it’s not realistic. Dye lots change and discontinued tile is discontinued. When an exact match isn’t available, the honest options are a complementary tile in a deliberate pattern, or re-tiling the visible field while keeping the existing layout. We’ll show you samples and price both paths before you commit.
Do You Offer a Warranty on Tile and Fixture Work?
Yes. The 365-Day Done Right Promise means if the work isn’t right, we make it right, and it’s backed by The Haven Standard rather than a verbal assurance. The written warranty comes with the written scope. Call (844) 320-5930 for a free estimate and we’ll walk you through exactly what’s covered.
Vanities, tile and fixtures are the part of a bathroom you look at and touch every day, which is why we price them in writing, name the brands in the scope, and photograph the membrane before it disappears under the finish. If you’re ready to see a real number for your Glendale bathroom, call Rowan Construction Group Glendale at (844) 320-5930 for a free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge. Start with our home page if you’d like the full picture of how we work.
Written by the team at Rowan Construction Group Glendale, serving Glendale.


