A Rowan company - serving Glendale, CA
A new herringbone paver driveway
Mighty Buildings · Glendale

Mighty Buildings Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new concrete driveway with a paver border
A new paver patio with a seat wall and fire pit
A new bay window with a cushioned seat
A new wood side gate with black hardware
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Driveway & Pavers: The Glendale Owner’s Guide

Rowan Construction Group Glendale installs driveway and paver systems for Mighty Buildings prefab homes in Glendale, and the typical installed range runs $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for a concrete driveway, and $250 – $700 for a sealing refresh. We’re an independent service provider, not affiliated with Mighty Buildings, and every quote we give is a flat written price before any work starts. Most Glendale owners don’t wake up knowing their driveway needs attention; they notice a rut that never drains after a winter storm, a paver that rocks underfoot near the garage apron, or a hairline crack that’s doubled in width since spring.

Call (844) 320-5930

Which Mighty Buildings Models This Applies To

A crew setting pavers over a compacted base

Mighty Buildings builds its homes on a panelized 3D-printed system, and the driveway and hardscape spec is set per project rather than baked into a single universal template. So the parts question is really a “what’s under and around my unit” question. Your starting point is the site plan and hardscape schedule that came with the home; those documents list the paver series, base compaction specification, and edge-restraint type. If you can’t find them, we can identify the system on-site by sectioning a small area and reading the base depths and joint sand in place.

On the OEM-versus-aftermarket question: Mighty Buildings doesn’t manufacture pavers. Their project specs reference standard commercial paver quarries and series, which means aftermarket matching is normal, not a workaround. We source from Belgard and Techo-Bloc for pavers, which keeps the written quote honest rather than padded with a proprietary markup. The one compatibility gotcha: get the base course spec right before you pick the surface material, because the paver above it is only as stable as the compacted aggregate below. Matching the top stone to a photo while ignoring base depth is the mistake we correct most often in Glendale.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Driveway & Pavers Is Failing

  • Ponding water that lingers 24-plus hours after rain. This means the base has settled or the surface slope has drifted below its original fall, a common result of our clay-heavy Glendale soil shifting through wet winters.
  • Individual pavers that rock or sink underfoot. Loss of joint sand and base support lets a single unit work loose; leaving it means the void widens and takes neighbors with it.
  • Widening cracks along unit joints. In Glendale’s dry summer heat, a small crack in a concrete drive can open noticeably in a single season, and it’s the first sign the slab is moving.
  • Efflorescence (white chalky bloom on the surface). Moisture pushing through the slab or mortar carries salts to the surface; it’s cosmetic at first but points to a drainage or moisture problem underneath.
  • Sunken or raised edge restraints. When the paver edge restraint lifts or settles, the outer course starts to splay; catching it early keeps the repair to one run instead of the whole driveway.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new black aluminum pool fence with a gate

Here’s the honest price picture for a Glendale install, with parts and labor separated so you can compare line by line:

Scope Installed Range (Glendale)
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

What drives the spread: driveway square footage, base depth required to handle Glendale’s expansive clay, paver series and thickness, whether existing material needs hauling away, and drainage corrections like regrading to a channel drain. Every quote is a flat written price with a written scope and written warranty under Clause 1 of The Haven Standard; no work proceeds on a change until a change order is signed. The 365-Day Done Right Promise covers the installation, and every visit includes a documented photo record showing the base prep and finished surface.

DIY or Call Us?

What you can safely check yourself: photograph the failing area after a rainstorm, note where ponding collects, and dry-fit a single loose paver to see whether the base below is soft or intact. Those notes will speed up the estimate. What you shouldn’t attempt: base excavation, compaction, regrading, and slab pouring. A driveway failure in Glendale is almost always a base or drainage problem, and a DIY surface patch on a bad base just resettles within a season and costs more to fix the second time. There’s also real physical risk in cutting concrete or lifting paver units without proper equipment. Call (844) 320-5930 to schedule a free estimate, and we’ll also give a free second opinion on any written estimate you already have.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A wood double vanity with two mirrors after a bathroom remodelA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch