A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Mighty Buildings · Glendale

Mighty Buildings Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Kitchen Remodeling: The Glendale Owner’s Guide

A Mighty Buildings kitchen remodel in Glendale typically runs $14,000 – $45,000 installed, depending on whether you’re refreshing cabinets and counters or reworking the layout inside a panelized shell. We handle the trades that follow the Mighty Buildings structure – cabinet installation, countertops, backsplash, islands, plumbing fixtures, and finish work – and we quote a flat written price before anything gets ordered. Scheduling is planned work, not emergency work; expect a written scope within days of your call, not a same-day crew.

Call (844) 320-5930

Glendale owners usually call us after a different kind of failure. The Mighty Buildings panel home is a factory-built envelope, and the kitchen inside it ages like any kitchen: cabinet boxes loosen where they were anchored to panel studs, countertop seams over the panel joint open up, and the factory-specified appliance clearances stop matching whatever was swapped in later. If your Mighty Buildings kitchen is a 2019 – 2023 unit in Adams Hill or Rancho San Rafael, the original hardware is likely at the end of its first cycle.

Which Mighty Buildings Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Mighty Buildings built its early California output as panelized single-family and ADU units, including the Mighty Mod and the larger Quattro and Casa lines. Each uses a steel-and-composite panel system rather than conventional wood framing, and that distinction matters the moment you hang a cabinet or cut a countertop: anchoring into a Mighty Buildings wall is a different fastening problem than anchoring into 2×4 studs at 16 inches on center. We identify the wall assembly before we quote, not after.

Here’s the identification step that catches people. The model plate on a Mighty Buildings unit is not always in the same place – check the interior face of the electrical panel door, the inside of the kitchen sink base cabinet, and the exterior wall near the utility penetration, in that order. If the plate is gone, the serial usually lives on a sticker behind the range or on the panel joint at the kitchen’s short wall. Photograph whatever you find; we can read the build spec from it.

On the OEM-versus-aftermarket question, Mighty Buildings-specific cabinet hardware and panel trim are worth sourcing through Mighty Buildings when still available, because the fastening pattern is proprietary. Standard kitchen components – cabinet boxes, doors, drawer slides, hinges, countertop slabs, tile – are better sourced aftermarket, where you get real choice. We work across KraftMaid and Wellborn cabinets, Cambria and Caesarstone and Silestone surfaces, and Kohler and Toto fixtures, all of which fit a Mighty Buildings kitchen fine once the wall assembly is understood. We also service KraftMaid, Cambria, and Silestone installations in Glendale homes that predate the Mighty Buildings shell. One note on affiliation: Rowan Construction Group Glendale is an independent contractor and is not affiliated with Mighty Buildings.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Kitchen Remodeling Is Failing

  • Cabinet doors that rub or won’t stay shut. On panel walls, the cabinet box can shift by a few millimeters as the panel moves seasonally, and the hinge no longer aligns with the door edge. This is a fastening and shim problem, not a hinge problem, and replacing hinges alone won’t fix it.
  • Countertop seams opening along the panel joint. The seam over the wall joint absorbs movement that a stone slab doesn’t want to absorb. In Glendale’s inland heat cycles, a seam that opens 1/16 inch in July may close by December, which is why we measure the gap across seasons before recommending a fix.
  • Caulk lines at the backsplash cracking repeatedly. This is usually the panel-to-drywall transition moving under the tile, not bad caulk. Recaulking every year is a symptom of a substrate issue that a proper backer resolves.
  • Soft spots or delamination in the cabinet floor. Factory cabinet floors in early Mighty Buildings units used a particle board that swells at the sink base when the plumbing weeps. Once it swells, it stays swelled; the fix is a new base, not a patch.
  • Appliance clearances that no longer meet the opening. When a range or dishwasher is replaced, the new unit frequently doesn’t match the factory opening spec. We see this often in Glendale kitchens where a 2022 appliance swap left a 1/4-inch gap that was caulked and forgotten.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished backyard cottage with a small covered porch

Glendale kitchen work for a Mighty Buildings home breaks down like this. A full kitchen remodel is $14,000 – $45,000; a small kitchen remodel is $9,000 – $20,000; cabinet installation is $4,000 – $13,000; countertop installation is $2,000 – $6,500; backsplash installation is $800 – $2,500; and kitchen island installation is $3,000 – $10,000. Those are installed prices, not parts prices, and they include materials at the grade specified in the written quote.

What drives the range is mostly substrate work: how much of the panel wall needs re-anchoring or furring out, whether the countertop has to be templated twice because the wall is out of plane, and whether the electrical or plumbing needs to move behind the panel. Parts are itemized separately from labor in every quote, so you can see what a Cambria slab costs versus what we charge to set it. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool, and no change proceeds without a signed change order. Every job carries our 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by a terms page rather than an asterisk.

We deliver a flat written price with a written scope and a written warranty before work starts, and that number has held within a few percent across 4,000-plus projects since 2007. Crews are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as a standard deliverable – useful when a panel-wall issue needs to be shown to an insurer or a future buyer. If you have a written estimate from another contractor, bring it; our Free Second Opinion reviews it line by line at no charge.

DIY or Call Us?

You can safely check a lot of this yourself. Open the cabinet doors and look at the fasteners where the box meets the wall – pull gently on the box and watch for movement at the wall line. Run a straightedge across the countertop seam and photograph any gap. Check under the sink base for swelling or staining. Photograph the model plate. That information makes our quote faster and more accurate.

Where DIY goes wrong: re-anchoring a cabinet into a Mighty Buildings panel wall with the wrong fastener can crush the panel face or fail to bite the steel, and a loaded upper cabinet that comes off the wall is a genuine injury risk. Cutting a countertop for a new sink on an out-of-plane wall almost always produces a seam that opens within a season. And any work that touches the rough plumbing behind the cabinet, or the electrical at the appliance outlets, should be done by a trained professional – we don’t recommend homeowners open those up. Call (844) 320-5930 and we’ll tell you honestly whether your issue is a repair or a remodel.

FAQs

A new roof with clean valleys and new flashing

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new casement window over a kitchen sink

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch