







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Driveway & Pavers: The Glendale Owner’s Guide
We install Dvele-compatible driveway and paver systems in Glendale, and a full paver driveway typically runs $7,000 – $18,000 installed, with concrete driveway replacement at $5,000 – $14,000 and sealing at $250 – $700. Dvele homes are modular, which means the driveway is often one of the first site-built assemblies to move once the modules are set, and owners usually find out something’s wrong the same way: a low spot holding water after the first winter rain, a paver edge that’s settled a half-inch below the garage apron, or hairline cracks fanning out from where the utility trench was backfilled. We’re an independent contractor, not affiliated with Dvele, and we quote the whole job as a flat written price before anyone lifts a paver.
Which Dvele Models This Applies To

Dvele has built its line across several modular platforms, and the driveway scope doesn’t change much from model to model, but the site conditions around it do. The thing to identify is not a “Dvele driveway part” in the appliance sense; it’s the assembly spec your home was set to. Pull the site plan or the modular delivery documents, and you’ll usually find the paver type (often a Belgard or Techo-Bloc profile), the base depth, and the edge restraint detail. If those papers are gone, we measure the field, count the paver pattern, and match it to a current profile from a manufacturer’s catalog.
The OEM-versus-aftermarket decision here is straightforward. There is no “OEM driveway.” Pavers are pavers, and the closest match to your Dvele set-day spec is usually a standard catalog profile from a material brand we already source from. Where originality matters, we match color and dimension to the existing field so the repair blends. Where it doesn’t, a quality aftermarket paver at the same thickness and compressive rating does the job for less money. KraftMaid, Cambria and Silestone come up on the interior side of Dvele work; on the exterior, Belgard and Techo-Bloc are the names we quote most often in Glendale.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Driveway & Pavers Is Failing
Five symptoms tell you the base or the surface is giving up, and each one points at a different cause:
- Water pooling at the garage apron. The slope has flattened or the paver field has dropped, so runoff no longer moves away from the house. This is a grading problem, not a surface problem, and new pavers over bad grade fail the same way.
- Pavers rocking or settling in one zone. A soft spot in the base, usually where fill wasn’t compacted in lifts. You’ll feel it underfoot before you see it.
- Sand washing out of the joints. Normal in the first year as polymeric sand cures, but ongoing loss means water is running through the field instead of off it.
- Efflorescence, the white chalky bloom on the surface. Moisture pushing salts up through the paver. Sometimes cosmetic, sometimes the first sign water is trapped underneath.
- Edge restraint lifting or separating. The plastic or aluminum edge that holds the field together has lost its spikes, and the outer course starts to spread.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Glendale depend mostly on square footage, base repair, and whether we’re replacing the whole field or a section. Here’s what we quote:
| Scope | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the top of the range: base excavation over 8 inches, existing concrete removal, drainage correction, or a slope that needs re-grading toward the street. Parts and labor are separated on the written quote, so you can see the paver cost per square foot and the base prep line next to it. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. The work comes with our 365-Day Done Right Promise: if it isn’t right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: pour a bucket of water on the surface and watch where it runs, press down on any paver that feels loose, and photograph the edge restraint where it’s lifting. That’s diagnosis, not repair. Where DIY goes wrong on a Dvele driveway is in the base. Laying pavers over an uncompacted subgrade looks fine for a season and then fails, and re-doing a base twice costs more than doing it once. Excavation near a foundation, drainage corrections, and concrete flatwork are also places we don’t suggest a first attempt. If you’re in Glendale, call (844) 320-5930 for a free estimate and we’ll tell you honestly which parts of the job are repair-worthy and which need replacement.
FAQs

A properly installed paver driveway over a compacted base lasts 25 – 30 years in Glendale’s climate, and the pavers themselves can outlast that if the base holds. What shortens it is water. Glendale’s dry summers followed by concentrated winter rain punish a flat grade, so the drainage detail, not the paver brand, decides how long you get. Call (844) 320-5930 if you’re not sure whether your current field is failing or just settling.
Yes, often, and we’ll tell you when replacement isn’t needed. A single settled zone, a failed edge restraint, or lost joint sand is a repair, usually well under the cost of a full replacement. If the base is soft across most of the field or the slope has failed at the garage apron, a patch will fail with it and replacement is the honest answer. Call (844) 320-5930 for a free second opinion on any written estimate.
A typical Dvele driveway of 400 – 600 square feet takes 3 – 5 working days: one day of removal and excavation, one to two days of base prep and compaction, and one to two days of paver laying and edge work. Concrete is faster to pour but needs a cure window before you drive on it. We confirm the schedule in writing before we start, and every visit includes a documented photo record of what we found and what we did.
We match to the existing profile by dimension, thickness and color, sourced through the material brands we already work with on other Dvele scopes, including Belgard and Techo-Bloc. We don’t claim to keep paver stock on hand or on a truck; the material is ordered to the job once the written scope is signed. You’ll see the brand name and the per-square-foot cost on the quote, so there’s nothing to take on faith.
Call (844) 320-5930 to schedule your free estimate for your Glendale Dvele driveway or paver project. We’ll bring the price in writing before any work starts, review any competitor’s quote line by line at no charge, and tell you plainly what we found.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












