







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Glendale Owner’s Guide
Dvele-compatible kitchen remodeling in Glendale runs $14,000 – $45,000 installed, with most full tear-outs landing between $28,000 and $38,000 once cabinets, counters, and backsplash are counted together. We source Dvele-matched cabinet boxes, door fronts, and panel profiles and can usually schedule an assessor the same week you call. Owners find out the kitchen is failing in ways that have nothing to do with how the room looks: a base cabinet gapped away from the wall by a quarter inch, a door that rubs the frame every June, a countertop seam that has gone dark.
Key Takeaways
- Dvele kitchens are built around modular cabinet and panel systems, so a single failed component can often be matched rather than replaced whole.
- Glendale’s dry summers and Santa Ana wind weeks move wood in ways the factory tolerance doesn’t account for.
- We quote a flat written price before work starts and won’t move on a change without a signed change order.
- Our technicians have up to 19 years of experience with cabinet and finish systems, including Dvele units.
Which Dvele Models This Applies To

Dvele builds its kitchen systems around modular cabinet carcasses and coordinated door and panel profiles, so the model line matters less than the component family. What you’re matching is the box depth, the door overlay style, the finish code, and the hinge and slide pattern. The identity plate inside the cabinet door (usually on the inside face of the sink base or the upper next to the range hood) carries the model and finish reference. Photograph it before you call anyone.
The compatibility gotcha most owners miss: Dvele has used more than one hinge bore pattern across its cabinet generations, and a door that looks identical from the front can sit on a different screw-spacing. Pull one door and measure the bore center-to-center before you order a replacement. Same story with drawer slides – the cabinet box depth changed on some lines, and a slide that’s a half inch off will bind at full extension.
On the OEM-versus-aftermarket call for Dvele specifically: OEM door fronts and finish-match panels are worth the cost when you’re keeping the rest of the kitchen, because dye lots and finish sheens drift between runs. For interior hardware, slides, and hinges, quality aftermarket equivalents are usually a better value and we’ll say so on the quote. We source through the same fifty-plus vetted brands the rest of our work runs on – KraftMaid and Wellborn for cabinet boxes, Cambria and Silestone for surfaces – when a Dvele-specific part isn’t the right answer. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Dvele.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
Most failures in a Dvele kitchen start at the substrate or the hardware, not at the finish. Here’s what we find when we open one up in Glendale.
- Cabinet doors that rub in summer and clear in winter. Glendale’s humidity swings move solid wood and MDF door fronts enough to change the reveal in a season. When a door rubs only during the dry, hot stretch, the cause is moisture movement in the door and the frame, not a bad hinge.
- A base cabinet pulling away from the wall at the top. That gap is almost always a fastener issue or a floor that’s tilted more than the cabinet shims allowed for. Left alone it walks the counter seam apart.
- Dark lines at countertop seams. The seam has opened and moisture is getting into the substrate underneath. In a Glendale kitchen with strong afternoon sun, that seam opens faster on the south-facing run.
- Drawer slides that bind in the last two inches. Usually a box depth mismatch or a slide that’s been overloaded past its rating for years. Once the ball bearings flat-spot, no amount of adjustment brings them back.
- Backsplash tile lifting at the counter line. Grout and thinset fail when the substrate behind them moves. If the tile is tenting, the wall behind it needs to be looked at before anyone re-grouts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Dvele-component kitchen remodel in Glendale typically lands in the $14,000 – $45,000 range. The written quote is the flat price for the scope, and it’s delivered before any work starts.
| Item | Installed range (Glendale) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range is cabinet run length, door style and finish code, and whether the counter is a slab layout or a fabricated composite. Parts are quoted as line items, labor is quoted as a line item, and you’ll see both. Every install carries the 365-Day Done Right Promise, backed by The Haven Standard – if it’s not done right, we make it right.
DIY or Call Us?
Some of this is safe to check yourself: pulling one door to photograph the hinge bore, running a level along the front of your base cabinets, pressing on a tile to see if it’s hollow. That’s diagnostic information and you should have it. What’s not safe or smart to DIY is anything involving cutting cabinet boxes to fit a replacement, resetting a counter seam, or working around a live appliance circuit behind a cabinet run. We recommend a trained professional for cabinet removal and reinstallation – the load path through a base cabinet and its attachment to the wall is a structural detail, and getting it wrong is what makes a kitchen pull apart at the counter.
Call (844) 320-5930 to schedule your free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge.
FAQs

Twelve to twenty years for the cabinet boxes, seven to twelve for hardware, and ten to fifteen for counter surfaces, assuming normal use and no water intrusion. The Glendale climate shortens the finish and seam life on south- and west-facing runs because of the sun load. Call (844) 320-5930 for an exact quote – estimates are free.
Often yes on hardware – a hinge, a slide, a door front – and we’ll quote repair before we quote replacement if repair makes sense. Once the cabinet box or the counter substrate has moved, replacement is usually the honest answer. Call (844) 320-5930 and we’ll tell you which side of that line you’re on.
A single-component replacement is typically a half-day to a two-day job; a full cabinet or counter replacement runs three to seven working days depending on the source lead time. We give you a written schedule with the quote. Call (844) 320-5930 to schedule your free estimate.
We match by the identity plate inside the cabinet door, the bore pattern, and the finish code, then source through our vetted brand network or a Dvele-compatible equivalent. Every quote is a flat written price with a written scope and written warranty – no “call for a quote” here. Call (844) 320-5930 for a free second opinion on any estimate you’ve already received.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.
Call (844) 320-5930 for your free estimate on Dvele kitchen remodeling in Glendale. A written price, a documented photo record on every visit, and background-checked, uniformed technicians – included as standard.












