







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Glendale Owner’s Guide
We build and finish Dvele-compatible home additions and ADUs in Glendale, and the installed cost for the work we handle typically runs $45,000 – $130,000 depending on square footage, foundation type, and whether the addition carries a full kitchen and bath. A detached ADU is its own number, $90,000 – $220,000, and a garage conversion sits between them at $30,000 – $80,000. Most Glendale owners don’t find out something’s wrong with the structure all at once. They notice a door that stopped closing flush in the rear addition, a hairline crack that keeps reopening above the header, or a floor that’s gone soft near the exterior wall after the first wet winter.
Which Dvele Models This Applies To

Dvele builds prefab and modular homes in several lines, and the structural detailing changes between them: panelized wall systems on the newer lines, different floor-to-floor connections, different exterior cladding assemblies. The practical way to identify what you have is to find the data plate inside the unit – usually near the electrical panel or in a utility closet – and match the model and serial against the drawings Dvele supplied at delivery. Those as-built drawings matter more than any generic spec sheet, because a Glendale addition tied to an existing Dvele structure has to match the original connection details, not approximate them.
On parts sourcing, we’re an independent contractor and not affiliated with Dvele. For structural connectors and cladding components we’ll match the original manufacturer spec where it’s available, and where it isn’t, we specify an equivalent with the same load rating and material grade and put that substitution in writing on the quote before anything is ordered. Owners should know: a connector that’s close isn’t a connector that’s rated. Cheap aftermarket brackets are the most common shortcut we see on Dvele additions in Glendale, and they’re the first thing that shows up in a failed inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
- Doors and windows that stick seasonally. This usually points to foundation movement or a settling header, not the door itself. In Glendale’s expansive clay soils, a slab that wasn’t engineered for the local shrink-swell cycle will move the frame a little every wet and dry season.
- Hairline cracks that reopen after patching. Cracks that keep returning in the same spot above a doorway or window corner indicate a structural connection that’s still moving. Patching the drywall hides it; it doesn’t fix it.
- Soft or bouncy floors near exterior walls. Often moisture intrusion at the cladding or flashing line, which rots the subfloor edge before it shows on the surface. A moisture meter at the perimeter tells you in two minutes what guessing won’t.
- Musty smell in the new space with no visible leak. Water is getting in somewhere it can’t evaporate – typically at a penetration or the roof-to-wall junction of the addition. Glendale’s dry summers mask this until the first real rain.
- A failed inspection report on the addition’s electrical or framing. If a prior owner built or finished the space without permits, the correction cost lands on you. Pull the permit history from the city before you buy or before you renovate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for home additions in Glendale, quoted as a flat written number with a written scope:
| Work | Installed price range |
|---|---|
| Home addition (attached) | $45,000 – $130,000 |
| ADU construction (detached) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
What drives the range: foundation and soil conditions, whether the addition carries a full kitchen and bath, roof tie-in complexity, and permit and plan-check fees. The quote separates materials and labor line by line, and the numbers come from our vetted supplier list – KraftMaid and Wellborn cabinets, Cambria and Caesarstone or Silestone countertops, GAF and Owens Corning roofing – so the material line reflects a real price, not a padded one. No work proceeds on a change until the change order is signed, which is why our projects finish within a few percent of the agreed number. The 365-Day Done Right Promise covers the workmanship in writing.
DIY or Call Us?
You can safely check a few things yourself: run a level along the floor, read moisture at the baseboard with a meter, photograph cracks with a dated reference, and pull the permit history from the city. That information is genuinely useful and we’ll look at it with you.
What we don’t recommend is opening a wall to inspect framing, cutting into a foundation, or attempting a structural repair on a load-bearing connection. Those are where DIY goes wrong in a way that costs far more than the original repair, and in Glendale a structural fix that isn’t permitted and inspected can surface as a problem at resale. Call (844) 320-5930 and we’ll tell you honestly whether what you found is cosmetic or structural – free estimate, written price before any work starts.
FAQs

How long does a Dvele addition or ADU last in Glendale? A properly built and maintained structure holds up for decades, and the parts that fail first are the moisture-exposed connections and the roof tie-in, not the frame. Glendale’s dry climate is forgiving, but the wet season is when water finds any gap in the flashing.
Can the addition be repaired instead of rebuilt? Often, yes. Settlement and moisture issues are frequently fixable at the connection and flashing level rather than by tearing out the structure, and a written inspection tells you which you have. Call (844) 320-5930 for an exact assessment – estimates are free.
How long does the work take? An attached addition typically runs several weeks to a few months depending on scope, and a detached ADU longer with plan check and foundation work included. We give you a written schedule with the written price so you know the sequence before the crew starts.
How do you source Dvele-compatible parts? We work from your original Dvele as-built drawings and data plate, match the manufacturer spec where it’s available, and specify a documented equivalent with the same load rating where it isn’t – with the substitution written into the quote. We’re an independent contractor, not affiliated with Dvele.
Call (844) 320-5930 for a free estimate. We’ll put the number in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












