







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Glendale Owner’s Guide
We install fences that pair correctly with Quikrete setting materials, and a full Quikrete-based fence installation in Glendale runs $3,500 – $9,000 installed, depending on footage, height, and what’s sitting in the ground already. If you’re replacing a failed run or setting new posts with Quikrete Fast-Setting Concrete or the Quikrete Fence Post mix, that’s the range you’re working inside. Most Glendale owners find out something’s wrong the same way: a post starts leaning after a Santa Ana wind event, a gate drags on the pavers, or a fence line that looked straight in April has a visible bow by August.
We’re Rowan Construction Group Glendale, an independent contractor and not affiliated with Quikrete. What we know is how their fence products actually behave in Glendale soil and sun, and what it costs to make a fence line hold.
Key Takeaways
- Quikrete post-setting mixes are the material, not the fence. The failure is almost always drainage, soil, or post depth, not the bag.
- Installed Quikrete-based fence work in Glendale: $3,500 – $9,000, written as a flat price with a written scope before anyone digs.
- Quikrete Fast-Setting sets in roughly 20 – 40 minutes; standard Quikrete Concrete Mix needs 24 – 48 hours before you load the post. Mixing those two up ruins a weekend.
- Every Rowan visit includes a documented photo record of what we found in the hole and what went back in it.
Which Quikrete Models This Applies To

Quikrete doesn’t make fence panels or posts. What they make is the concrete that holds your posts, and that’s the part that decides whether your fence line survives a Glendale summer. The three products homeowners ask us about most are Quikrete Fast-Setting Concrete Mix (the red-and-yellow bag, sets in about 20 – 40 minutes), Quikrete Concrete Mix (the standard 80 lb bag, needs 24 – 48 hours of cure before load), and Quikrete Fence Post Mix, a fast-setting formula sold specifically for post setting.
Identifying what you have is mostly a bag-reading job. Look for the product name and the yield line, usually printed near the bottom: an 80 lb bag of standard Concrete Mix yields about 0.6 cubic feet, and a typical 4×4 post in a 10-inch hole wants roughly two bags. Fast-Setting and Fence Post Mix yield slightly different volumes, so match the bag to the hole, not to a guess.
On the OEM question: there’s no “Quikrete-compatible” post that requires their concrete. Any pressure-treated 4×4 or 6×6 sets fine in a Quikrete mix. The compatibility gotcha is elsewhere. Fast-Setting Mix and standard Concrete Mix are not interchangeable on cure time, and a fence built on Fast-Setting that gets loaded the same afternoon can shift before it’s done curing. That single mistake accounts for a share of the leaning posts we’re called out to fix in Glendale.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Fence Installation Is Failing
Concrete doesn’t fail on its own. It fails because water got under it, the hole was too shallow, or the mix was wrong for the load. Here’s what that looks like on a Glendale fence line:
- Posts leaning after wind. Usually a shallow hole (under 24 inches) or a mix that never fully set because it was poured into standing water. Glendale’s clay-heavy soils hold moisture, and a post set in a wet hole with Fast-Setting mix can fail to cure properly.
- Concrete crumbles when you press it. That’s a bad ratio or a bag that took on moisture before mixing. Quikrete bags have a shelf life, and a bag left on a damp garage floor for a year sets soft.
- Gate sagging and dragging. The hinge post is carrying more load than the others and usually has the shallowest footing. Common on Glendale properties where the gate sits near a driveway apron and the digging got harder.
- Cracks radiating from the post base. Shrinkage cracks in the concrete collar are normal in the first month. Cracks that widen over a season mean the soil under the footing is moving, which is a drainage problem, not a concrete problem.
- Visible gap between post and concrete. The post shrinks as pressure-treated lumber dries, and a gap lets water in. That water freezes nothing in Glendale, but it does rot the post base from the inside out over several years.
Replacement Cost & What’s Included

Installed fence work using Quikrete setting materials in Glendale runs $3,500 – $9,000. Vinyl fence installation lands in that same band at $3,500 – $9,000; aluminum fence installation runs $4,000 – $10,000. The number you get depends on linear footage, fence height, post count, gate count, and how much old concrete has to come out of the ground.
What drives the range up: removal and haul-away of failed footings, hillside grading on the Verdugo-adjacent lots, and any run that needs a retaining element to hold grade. What keeps it down: a straight run on flat ground with reusable posts.
| Line item | Glendale range |
|---|---|
| Vinyl fence, installed with Quikrete-set posts | $3,500 – $9,000 |
| Aluminum fence, installed | $4,000 – $10,000 |
| Post replacement (failed footing, per post) | Quoted line by line |
| Old concrete removal and haul-away | Quoted line by line |
Every Rowan fence quote is a flat written price with a written scope and a written warranty, delivered before anyone digs. No change proceeds without a signed change order. The workmanship carries our 365-Day Done Right Promise: if it isn’t right, we make it right, backed by The Haven Standard and a terms page, not an asterisk.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a safe middle ground and a line past it. You can check things yourself without risk: press a screwdriver into the concrete collar to see if it’s soft, look for a gap between post and concrete, measure post spacing against the panel manufacturer’s spec, and check whether the gate hinge post sits lower than the rest. None of that involves tools that can hurt you.
Where DIY goes wrong is the pour itself. Digging a 24-to-36-inch hole by hand in Glendale clay is hard work, and the two failure modes are consistent: a hole too shallow for the soil, and a mix poured into water that never cures. Loading a post before the concrete reaches full strength is the third. If the run is more than a couple of posts, or the ground is sloped, it’s cheaper to have it done once. Call (844) 320-5930 for a free estimate, and bring any written quote you’ve already got; our Free Second Opinion reviews it line by line at no charge.
FAQs

How long does a Quikrete-set fence post last in Glendale? A properly set post in Quikrete concrete typically lasts 15 – 20 years before the wood, not the concrete, becomes the weak point. Contact with soil moisture and the post’s own treatment quality matter more than the concrete brand. Call (844) 320-5930 if you want us to look at a specific post before it goes.
Can a failing post be repaired instead of replaced? Sometimes. A post that’s leaning but still solid can often be re-set in a fresh footing without replacing the panel. A post with a rotted base or a split from the concrete line up has to come out. We tell you which one you have after we dig, not before.
How long does the swap take? A single post re-set is a few hours of work spread across a cure window. A full run is usually a one-to-three day job depending on footage and how much old concrete has to come out. The written scope tells you the days before we start.
How do we source the Quikrete product? We buy Quikrete materials from building supply sources we’ve vetted, and we check the bag date and condition before mixing. If a batch has taken on moisture, it doesn’t go in the hole. The parts we don’t source are fence panels, posts, and hardware, which come from the fence manufacturer you choose.
Rowan Construction Group Glendale also works with KraftMaid, Cambria, and Silestone on interior projects; on fences it’s Quikrete materials and your panel choice.
Get Your Written Price Before Anyone Digs
A leaning fence in Glendale is a small job that gets bigger every season the post stays wet. We’ll come out, check the footings, show you the photo record of what we found, and hand you a flat written price with a written scope before any work starts. That’s Clause 1 of The Haven Standard, and it applies to every fence job we take on. Call (844) 320-5930 for a free estimate. Calls are answered by a live person, and our technicians have up to 19 years of experience.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












