







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Driveway & Pavers: The Glendale Owner’s Guide
Quikrete makes the mixes that go under and between hardscape here, not the pavers themselves, so “Quikrete driveway and pavers” in Glendale usually means one of three things: a Quikrete concrete or sand-set base, Quikrete Polymetric Sand swept into paver joints, or Quikrete concrete mix poured as a slab or patch. We install and repair all three, and installed paver driveways in Glendale run $7,000 – $18,000, concrete driveways $4,500 – $12,000, and paver patios $3,500 – $11,000, with a written flat price before any work starts.
Owners almost never catch the failure at the surface. They notice it as joint sand washing out after a winter storm, a paver rocking underfoot near the driveway apron, or a hairline crack in a Quikrete patch that keeps widening. By then the base underneath has usually been moving for a season or two, and that is the part worth fixing.
Which Quikrete Models This Applies To

Quikrete’s product line is broad and the label matters more than the brand name on the bag. The products we see most in Glendale driveways and paver work are Quikrete Concrete Mix (the 80 lb. red bag, 4000 PSI rating), Quikrete Sand/Topping Mix, Quikrete Polymeric Sand for joint stabilization, and Quikrete High Strength Concrete Mix for structural patches. Each has a different set time, PSI, and best-use condition, and mixing one for the job of another is where most homeowner repairs go sideways.
To identify what you have, read the bag label for the product name and PSI rating, check the pour date stamped on the bag (Quikrete bags have a use-by window, and old stock sets weakly), and note the color of the sand if it’s joint sand, since polymeric and non-polymeric look similar dry. The OEM-versus-aftermarket question here is real: for structural concrete, matching Quikrete’s PSI spec matters; for joint sand, a quality aftermarket polymeric sand performs comparably if the application is right. We quote both and let the written price show the difference. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Quikrete.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Driveway & Pavers Is Failing
- Joint sand washing out after rain. Polymeric sand that was swept in dry, or applied to a wet joint, never fully cures and erodes with the first hard rain. In Glendale, where the rainy season concentrates between December and March, this shows up fast.
- Pavers rocking or settling unevenly. The base beneath has shifted, usually from poor compaction or water channeling under the edge restraint. A rocking paver is a symptom, not the problem.
- Hairline cracks widening in a Quikrete patch. Concrete mixed too wet, poured too thin, or placed without control joints will crack and the crack will grow with each thermal cycle.
- Efflorescence, the white chalky bloom on the surface. Moisture is migrating through the concrete or mortar and depositing salts on the face. It points to a drainage or vapor issue under the slab.
- Edges crumbling at the driveway apron or patio border. Edge restraint has failed or was never installed, so the pavers spread outward and the Quikrete bedding at the perimeter breaks down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing in Glendale breaks down by scope. A paver driveway re-lay with fresh Quikrete base and polymeric sand runs within the $7,000 – $18,000 paver driveway range. A concrete driveway replacement using Quikrete mix, with proper base prep and control joints, falls in the $4,500 – $12,000 range. A paver patio installation sits at $3,500 – $11,000, and driveway sealing is $250 – $700 if the existing hardscape is sound and just needs protection.
The range is driven by square footage, base depth, whether old material has to be hauled out, and whether the existing edge restraint can be reused. Our quote is a flat written price with a written scope, not a per-bag estimate that creeps. Under Clause 1 of The Haven Standard, no change proceeds without a signed change order, which is how projects finish within a few percent of the number the customer agreed to. The 365-Day Done Right Promise covers the work, and every visit includes a documented photo record of what we found and what we did.
DIY or Call Us?
You can safely check a few things yourself. Look for a bag label with a readable pour date and PSI rating, note where the joint sand is missing after rain, and see whether pavers move when you press on them near the driveway edge. Photograph any efflorescence and measure the width of cracks in Quikrete patches over a month; if a crack widens, the base is moving and no surface patch will hold it.
Where DIY goes wrong is excavation and base preparation. Removing a failed Quikrete slab, compacting the base to spec, and setting proper slope so water leaves the driveway takes equipment most homeowners don’t have, and a wrongly sloped base means the same failure returns within a season. Mixing Quikrete too wet because it’s easier to work is the other common mistake, and it weakens the finished concrete. Call (844) 320-5930 and we’ll give you a free estimate and a written price before any tool comes off the truck.
FAQs

A properly installed concrete driveway using Quikrete mix at the labeled PSI, with correct base prep and control joints, typically lasts 25 to 30 years. Paver driveways with polymeric joint sand last as long as the base holds, often 20-plus years, though joint sand needs replenishing every few seasons in Glendale’s dry climate. Call (844) 320-5930 for a free estimate on your driveway.
Often yes. Localized paver settling, missing joint sand, and isolated Quikrete patches can be repaired without a full replacement if the base underneath is still sound. If the base has failed across a large area or water is channeling under the slab, replacement is the honest answer and we’ll say so in writing. Call (844) 320-5930 and we’ll review both options with a written price.
A paver re-lay or joint sanding job on a typical Glendale driveway usually takes one to three days, while a full concrete replacement with excavation and cure time runs three to five days depending on square footage. We give you the schedule in writing before the crew starts. Call (844) 320-5930 to schedule your free estimate.
We source Quikrete products by matching the PSI rating and product type to the specific job, not by grabbing whatever’s on the shelf, and we confirm pour dates on every bag so you’re not getting old stock. If a quality aftermarket equivalent serves the job equally well and lowers the written price, we’ll quote that too. Call (844) 320-5930 for a free estimate and a line-by-line written quote.
We also work with KraftMaid, Cambria, and Silestone on other trades, but for hardscape in Glendale, our focus stays on the driveway and paver work in front of you. Bring us a competitor’s quote and we’ll review it line by line at no charge under the Free Second Opinion offer. Call (844) 320-5930 to schedule your free estimate and get a written price before any work starts.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












