A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Oldcastle · Glendale

Oldcastle Bathroom Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Bathroom Remodeling: The Glendale Owner’s Guide

We install Oldcastle-compatible bathroom remodeling in Glendale, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with small bathroom projects landing between $5,000 and $12,000. Because this is planned construction and not emergency work, we don’t promise same-day completion – we schedule, quote in writing, and build to the agreed scope. Owners usually discover an Oldcastle failure slowly: a hairline at the shower curb, a vanity top that rocks a millimeter, grout that keeps opening at the same joint no matter how often it’s patched. By the time the symptom is obvious, water has often been working behind the tile for a season or more.

Call (844) 320-5930

Which Oldcastle Models This Applies To

A tile setter installing wall tile in a shower

Oldcastle covers ground from hardscape and site products to bath and hard-surface lines, which is exactly why the model number matters more than the brand name. Before we quote anything, we identify what’s actually there: a label on the fixture or packaging, the rough opening (the actual framed hole behind the trim), and the tile’s nominal versus actual dimensions. Oldcastle tile sold as 12-inch often measures 11⅞ or 11¾ inches, and a swap that ignores that eighth of an inch shows up as a fudged grout line or a cut edge at the wall. For tubs and surrounds we check the apron height and the drain location before ordering.

Here’s the OEM-or-aftermarket call for Oldcastle specifically. Where the part is trim, a shower pan, or a vanity top, an exact-spec aftermarket equivalent is usually the better value and easier to source. Where the part is mechanical or carries a waterproofing warranty – a pan liner, a drain assembly, a rough-in valve – we stay with the matching OEM spec so the warranty stays intact. Rowan is an independent contractor and isn’t affiliated with Oldcastle; we source the right part for your model and document what we installed. We also work with KraftMaid, Cambria, and Silestone when a Glendale project calls for those.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Bathroom Remodeling Is Failing

  • Soft or spongy floor at the shower threshold. Water has passed the curb waterproofing and softened the subfloor. This is the one symptom you don’t wait on in Glendale, where dense winter rains and summer irrigation mean a slow leak has a wet season to spread.
  • Grout cracking on the same line, repeatedly. Movement, not bad grout. The substrate is flexing under the tile, so patching the joint hides it for a few weeks and returns.
  • A vanity top that rocks or a hairline crack at the sink. Usually an uneven cabinet or a cutout too close to the edge. It leads to a full crack, and the counter follows.
  • Efflorescence – the white, chalky film – on tile or grout. Moisture is moving through the assembly and leaving mineral deposits. It’s a sign of a waterproofing failure behind the finish, not a cleaning problem.
  • A shower pan that flexes underfoot. The pan has separated from the mortar bed or the liner is compromised. Flexing pans leak; the fix is the pan, not a coat of sealer.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new front yard fence with a matching gate

Here are the installed ranges we quote in Glendale, rounded to a number you can compare:

Scope Installed price
Small bathroom remodel $5,000 – $12,000
Bathroom remodel (full) $9,000 – $28,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range is the substrate and the waterproofing, not the tile. A pan replacement means membrane, float, and a flood test, and that’s the part owners underestimate. Under Clause 1 of The Haven Standard, the price is written before anyone starts – a flat price with a written scope and a written warranty, not “call for a quote.” Any change to the scope requires a signed change order first, which is the discipline that has kept projects within a few percent of the agreed number. The work carries our written workmanship warranty, backed by the 365-Day Done Right Promise.

DIY or Call Us?

Some checks are safe and worth doing yourself: confirm the model number on the fixture or its packaging, photograph the failed joint with a ruler in the frame, and note whether the floor flexes. That information makes the estimate faster and more accurate. What we’d steer you away from is opening the shower pan, pulling a tub, or resetting a liner on your own. Waterproofing failures in Glendale bathrooms cause slow rot that a weekend patch hides for a season and then hands you a bigger bill. If you’re unsure where the line is, call (844) 320-5930 and we’ll tell you honestly whether it’s a patch or a replacement. Estimates are free, and we’ll review any written competitor estimate line by line at no charge.

FAQs

A new paver pool deck

How long does an Oldcastle bathroom last before it needs replacing? In Glendale’s climate, figure 12 – 20 years for a properly waterproofed tile assembly and 8 – 15 years for a shower pan, with more frequent failure at the curb and drain. Poor ventilation shortens both. Call (844) 320-5930 for a free estimate on your timeline.

Can it be repaired instead of replaced? Sometimes. A single cracked tile, a leaking shower head, or a vanity top that just needs realignment is a repair. A failed pan, a moving substrate, or repeated grout failure means the assembly is compromised, and a patch only delays the repair. We’ll tell you which one you have.

How long does the swap take? A shower replacement runs 2 – 4 days. A full bathroom remodel typically takes 2 – 3 weeks, depending on whether the drain and rough-in move. In Glendale, we schedule to the written scope so you know the dates before demolition.

How do you source the part? From the model number and the rough dimensions, not from a guess. We confirm OEM spec for anything mechanical, use a matched aftermarket equivalent where it saves money and holds the warranty, and document the spec in your photo record. Call (844) 320-5930 to start with a free, written estimate.

For a Glendale bathroom that needs the right part, a written price, and a documented install, call (844) 320-5930 for your free estimate. We’ll confirm your model, show you the range in writing, and leave you with a photo record of what we found and what we did.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new multi-panel patio door opening a kitchen to the patioAn open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new bay window with a cushioned seat

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch