







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Glendale Owner’s Guide
Bathroom remodeling built around Unilock materials starts at $9,000 – $28,000 in Glendale, and every quote arrives as a flat written price before anyone touches a tool. Unilock isn’t a single product; it’s a licensed surface and masonry brand, and in a bathroom the Unilock line that matters most is a cultured stone or veneer surface applied to walls, a shower surround, or a feature wall behind a vanity. When that surface fails, the clues are usually physical: a hollow tap over a tile, a hairline crack crawling up a grout line, a thin line of efflorescence at the bottom edge, or a piece of stone that lifts slightly under your hand. The failure is almost never the stone itself. It’s the substrate, the setting bed, or water that found a way behind the veneer.
Which Unilock Models This Applies To

Unilock’s residential line runs across several families, and the ones that turn up in Glendale bathrooms are the veneer and dimensional stone lines rather than the paving lines. If you don’t know what you have, the label is usually on a cardboard carton in the garage, or as a stamp or ink mark on the back of a spare piece. Measure the face of a single unit: length, height, and nominal thickness, in that order. Photograph the front, back, and a corner. That three-item record is what any supplier or installer needs to match a profile, and it is also what prevents a well-meant but wrong visit.
The OEM-versus-aftermarket question is genuinely different here. For a surface material, the “part” is not proprietary hardware; it is a stone profile with a specific face texture and a specific nominal thickness. A close match from another line, or a competent fabrication shop cutting a substitute material, can look right on day one and differ visibly at a joint within a season, because face texture and color lotting are the two things camera comparisons hide well. Reputable supply houses track dye lot and run. Ask for it in writing on the order. Where the stone cannot be matched, a local tile supply house may carry an equivalent, and we also source through brands like KraftMaid, Cambria, and Silestone when a vanity or countertop is being set at the same time. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Unilock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- A hollow sound when you tap the surface. Bond has separated from the substrate behind the stone, often after repeated wet-dry cycling around a shower. Once a section has lost contact, water reaches the back of the stone and the setting bed, and the problem grows quietly.
- Hairline cracks along grout lines or through the face of a unit. Movement in the substrate, a wall that flexes, or a setting bed that was too thin. Cracking in the stone face tells you the wall is moving; the crack is the symptom you can see.
- White powdery residue at the base of the wall. Efflorescence means moisture is migrating through the masonry. In Glendale this is very common in bathrooms that share a wall with an unconditioned crawl space, where seasonal vapor movement drives moisture up through the stone.
- Loose or proud units. A piece that rocks under hand pressure or sits above the plane of its neighbors. Usually an adhesive or setting bed failure rather than a stone failure, and the loose piece is the one most likely to come down.
- Discoloration or dark streaks that won’t clean. Staining that returns after cleaning points to moisture coming from behind the surface. This is the signal to stop treating it as a cleaning problem and open the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The whole-bathroom range for Glendale is $9,000 – $28,000, and the parts-plus-labor split depends on where the failure sits. A small bathroom remodel sits at $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000, and a shower replacement alone is $3,000 – $8,500. A tub-to-shower conversion is $3,500 – $10,000. A vanity install runs $800 – $3,000. Those ranges cover removal of the failed surface, substrate repair or replacement, waterproofing membrane, setting materials, the stone, and finish work, as a flat written price.
What drives a job toward the top of the range is substrate condition, not stone selection. A wall with drywall behind failing veneer needs cement backer board and a bonded waterproof membrane; a wall that already has proper substrate is a much shorter job. The scope also depends on whether the shower pan is involved. Under the Haven Standard, a stated price is delivered before any work begins, and no change proceeds without a signed change order. Every visit carries the 365-Day Done Right Promise, and you receive a documented photo record of what we found behind the wall and what went back over it.
DIY or Call Us?
An owner can safely check for a hollow sound with a tap test, photograph the back and edge of a spare unit for identification, and check caulk lines and the drain for water intrusion. Everything beyond that involves removing material from a wet wall or opening a waterproofed assembly, and that is where most of the failures we see originate.
The common mistake is replacing the stone over a substrate that is still wet or not bonded, sealing the moisture in with a new finish, and getting a repeat failure within months. A bathroom that has been closed up with a finished veneer on one side and a failure behind it needs that assembly opened and inspected, not patched. Call Rowan Construction Group Glendale at (844) 320-5930, and we will give you a written price rather than a guess.
Frequently Asked Questions

A properly installed Unilock veneer on a corrected substrate with bonded waterproofing typically holds 20 to 30 years; the stone itself can outlast the assembly around it. The failure point is nearly always moisture behind the surface, and the Southern California seasonal cycling around Glendale is a steady test of that. Call (844) 320-5930 for a free estimate if you’re seeing efflorescence or a hollow tap.
Sometimes, if the failure is a single loose unit and the substrate behind it is sound. If more than a small section sounds hollow or the wall has visible movement, a repair is a temporary fix and a partial replacement is usually the better value. Call (844) 320-5930 for an honest split between repair and replacement.
A single-wall veneer replacement is typically a 2-to-4 day job; a full bathroom remodel runs 2 to 4 weeks depending on substrate and scope. Because every job is quoted with a written scope before it starts, the schedule is a documented range rather than a rough promise. Call (844) 320-5930 to book a walkthrough.
We identify the profile by face dimensions, thickness, and back marking, then order from supply houses that track dye lot and run, matching your existing material rather than approximating it. Where a full match is impossible, we tell you before ordering, not after the box arrives. Call (844) 320-5930 and bring a sample piece with you to the estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












