







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Glendale Owner’s Guide
We install Unilock-compatible paver driveways and hardscape in Glendale, and a full driveway typically runs $7,000 – $18,000 installed, with paver patios at $3,500 – $11,000. Rowan Construction Group Glendale is an independent contractor and is not affiliated with Unilock; we work with the brand because its system is one of the more dimensionally consistent on the market. Most Glendale owners discover a failure the same way: a paver heaves out of plane after a wet winter, sand joints wash out toward the street, or a hairline crack in a few units spreads into a loose field after a hot, dry summer. By the time you notice one lifted paver, the base beneath it has usually been moving for a season.
Which Unilock Models This Applies To

Unilock makes several paver families, and they do not swap into each other’s beds. Brussels Block, Beacon Hill, Umbriano and the Estate Wall line are the ones we see most in Glendale, and each has its own thickness, face profile and joint width. Brussels Block is a tumbled, classically proportioned unit; Beacon Hill runs thinner and flatter with a tighter joint; Umbriano is a smooth, dense face that shows a different wear pattern under foot traffic. Estate Wall is a retaining unit, not a driveway paver, so don’t let a supplier substitute it into a drive.
Identify your line the easy way: measure one paver’s face and thickness with a tape. Thickness and joint width are the tells. Then look for a stamp or lot marking on the underside of a lifted unit. When your line is discontinued or understocked, the decision isn’t OEM-versus-aftermarket the way a mechanical part is, it’s match-versus-replace. A quality aftermarket equivalent that holds the same thickness and joint width can blend into an existing field if the color and texture are close. If the profile is off, you get a visible seam and a base that flexes differently. Call us and we’ll measure the field and tell you honestly which path holds up in Glendale.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
Five symptoms, and the cause behind each:
- A paver sits proud of its neighbors. Water got under the edge, froze or simply swelled the subbase, and the unit lifted. Left alone, it rocks and grinds the base looser every time a car crosses it.
- Joint sand washes out after rain. The bedding sand wasn’t compacted to the right depth, or the edge restraint is failing on the street side. Glendale’s wet winters push water downhill, and a weak edge lets it carry your sand with it.
- Hairline cracks spreading across units. Cracks moving through the pavers signal a base that’s settling unevenly, not a bad batch of product. The paver is telling you the ground under it moved.
- Weeds and efflorescence between the joints. Efflorescence is the white chalky bloom that appears when moisture pushes salts to the surface. It’s cosmetic alone, but when weeds follow, the joint sand has thinned enough to let light and water in.
- Sunken spots and rutting along the drive. Repeated tire traffic over an undercompacted or shallow subbase, common in older Glendale drives built on cracked concrete slabs. Resetting the top surface won’t fix a base that’s sagging.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Unilock-compatible paver driveway work in Glendale falls in these ranges. The number depends on square footage, whether the subbase needs rebuilding, and edge restraint and drainage detail.
| Scope | Installed range (Glendale) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (remove old, reset base) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
Our written quote separates base prep, bedding, pavers, edge restraint and joint sand so you can see what the labor is actually buying. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Every job carries our 365-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
What you can safely check yourself: whether edge restraint is loose, whether joint sand has thinned after rain, and whether individual units rock when you step on them. Mark the failing area with chalk before we arrive; it saves time.
Where DIY goes wrong is base. Resetting a lifted paver without addressing the compacted subbase below it just lifts it again next winter. Glendale drives built over old concrete slabs are especially prone to this, and a temporary patch hides the problem for one season while the base keeps loosening. Rebuilding the base with proper excavation, compaction and drainage is a crew job, and getting it wrong costs more than the original install. Call (844) 320-5930 for a free estimate and we’ll tell you whether your field can be reset or needs a rebuild.
FAQs

A properly installed Unilock paver field lasts decades here, with the pavers outlasting the base by a wide margin when drainage is right. What fails first in Glendale’s wet-winter, dry-summer swing is the joint sand and edge restraint, not the units themselves. We re-sand and re-strain edges on failing drives regularly so the field doesn’t have to be torn out. Call (844) 320-5930 for a look at yours.
Often, yes, if the base under the failed area is still sound and only a section of the field has moved. A local reset and re-sand handles single-lifted-unit problems without a full replacement. If the base has sunk or the whole field is rocking, a partial fix won’t hold. We’ll tell you which case you’re in after a free estimate.
A typical paver driveway replacement runs several working days once the schedule is set, since base prep and drying time drive the timeline more than the pavers themselves. Removing the old surface, compacting the base and laying the field can’t be rushed without compromising the job. We put the realistic timeline in writing before work starts. Call (844) 320-5930 for a written estimate.
We measure your existing field and match thickness, joint width and face profile to the closest available Unilock line, drawing on our sourcing across fifty-plus vetted brands. If your line is discontinued, we’ll show you the aftermarket equivalents that hold up and be honest about the ones that won’t blend. If you also have a failing countertop or cabinet, we service KraftMaid, Cambria and Silestone as well. Call us for the number before we pick up a tool.
Call (844) 320-5930 for your free written estimate on Unilock driveway and paver work in Glendale. We’ll measure the field, explain what’s failing and why, and put the price on paper before anything starts.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












