







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Glendale Owner’s Guide
We build Belgard-compatible home additions and ADUs in Glendale, and most of what we complete runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, quoted as a flat written price before anyone picks up a tool. That’s not “call for a number” – it’s a number you can screenshot, compare, and hold us to.
Here’s the thing about Belgard: they don’t manufacture additions or ADUs. They make pavers, hardscape units, and retaining wall systems. So when a Glendale homeowner tells us their addition’s Belgard product has “failed,” they almost always mean one of three things. Either the paver-paved walkway, patio, or driveway serving the new structure has settled and heaved. Or a Belgard retaining wall block behind the foundation is cracking or bulging. Or the hardscape that was specified in the original plan doesn’t match what’s now available, and a repair has become a re-build. We diagnose which one you’re looking at before we quote a dollar, and we tell you what we found – not how we feel about it.
Key Takeaways
- Belgard is a hardscape brand: pavers, wall blocks, and site units that surround an addition or ADU, not the structure itself.
- Additions in Glendale typically land $45,000 – $130,000; full ADUs $90,000 – $220,000.
- Every Rowan price is written and flat before work starts, with a signed change order required for any change.
- Glendale’s expansive clay soils and seasonal wet-dry cycling move hardscape more than most of Southern California – a reality that shows up in foundation-adjacent walls and pavers first.
Which Belgard Models This Applies To

Belgard’s structural and hardscape families have real model names, and they matter for a match. On the wall side, you’ll see Diamond Pro, Belair, Anchor Highland Stone, and Mini-Belair – these are segmental retaining wall (SRW) systems with interlocking lugs and specific batter angles. On the paver side, the catalog includes Urbana Stone, Cambridge Cobble, Catalina, Bristol Bay, and Lafitt Rustic Slab. Each series has its own thickness, face style, and layer system.
The identification gotcha: Belgard wall block profiles changed over the years (most notably the Diamond Pro and Belair lines), and a block purchased ten years ago may not interlock cleanly with a current replacement of the “same” name. Before we order anything, we pull a sample block from the wall or a loose paver from the bed, measure the actual face height, the lug depth, and the unit thickness, and confirm compatibility against the current spec sheet. That’s the difference between a patch that lasts and one that shears at the joint within a season.
OEM-versus-aftermarket on Belgard is simpler than it is on, say, a branded cabinet. Color and texture are the primary match points; the structural specs (face height, thickness, compressive strength) are the ones that actually matter. We’ll happily use a matched-color paver from another quality manufacturer if the section is decorative; for structural SRW units, it has to be the same system or the tier doesn’t work.
Rowan Construction Group Glendale is an independent service provider – we’re not affiliated with Belgard, and we don’t claim to be. We source across fifty-plus vetted brands, which means we’ll tell you honestly when the right answer is Belgard and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
Here are the symptoms we walk up to most often on Glendale properties, and what’s usually underneath them.
- Pavers settling next to the new foundation. Differential settlement is the culprit – the base aggregate wasn’t compacted in lifts, or the subgrade has moved. In Glendale’s clay-heavy soils, that shows up faster than it does on sandy lots.
- Retaining wall blocks bulging outward. Usually the geogrid length was undersized for the wall height, or the drainage behind the wall is blocked. Water pressure is doing the pushing, not the blocks.
- Wide joints opening between Belgard units. Joint-sand loss and seasonal movement are the cause. On a driveway or walkway that serves an addition, opened joints mean water is getting under the base.
- Efflorescence – the white chalky film – that keeps coming back. Moisture migrating through the unit, not a surface stain. If it returns after cleaning, there’s a drainage problem to solve.
- Weep or drainage failures at the wall base. Drainpipe was omitted or crushed, so water pools at the footing. On a wall retaining a finished addition’s grade, this is the condition that escalates fastest.
Every one of those five is a diagnosis we photograph and document. Under Clause 1 of the Haven Standard, no repair proceeds until the written scope is signed – and the photo record of what we found is yours to keep.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What you pay depends on the scope, but here’s the honest Glendale range for the work that surrounds a Belgard addition or ADU:
- Paver patio or hardscape repair (Belgard system): $3,500 – $11,000 installed
- Paver driveway install: $7,000 – $18,000 installed
- Home addition (structural, full build): $45,000 – $130,000
- ADU construction: $90,000 – $220,000
- Garage conversion: $30,000 – $80,000
What drives the range: base preparation depth, geogrid quantity, whether drainage has to be re-sleeved, and whether the wall is structural or decorative. Every quote is a flat price with a written scope – parts, labor, disposal, and re-grading laid out line by line. No change proceeds without a signed change order. The 365-Day Done Right Promise backs the work; if it isn’t right, we make it right.
Bring us a competitor’s estimate and we’ll review it line by line at no charge – our Free Second Opinion is standard, not an upcharge.
DIY or Call Us?
Some checks are safe to do yourself. Walk the wall, look for bulges. Run a level along the top course to see if it’s tipping. Check that the weep points at the wall base are clear of soil and mulch. Press on a paver corner to see if it rocks – rocking means the base has failed underneath.
Where DIY goes wrong on this work: lifting and relaying a structural wall course without re-establishing geogrid. We’ve seen homeowners re-lay a wall of Belgard blocks, pack the joints, and watch it lean again within a season – because the load path was never rebuilt, only the face. Structural retaining walls that retain grade behind lived-in space need an engineer’s look, not a Saturday project. Pavers over a compacted base are friendlier, but the base is the entire job, and a hand tamp won’t get you to spec on a driveway.
Call (844) 320-5930 and we’ll confirm what you’re dealing with. The free estimate is a real number on paper, and a live person answers your call.
FAQs

A properly built Belgard SRW wall with correct geogrid and drainage lasts 40-plus years; pavers on a compacted, drained base last 25 – 30 years before re-sanding or resetting. In Glendale’s clay soils, the base and drainage do the real work – skip either and you’ll see settlement in 3 – 5 years. Call (844) 320-5930 for an exact assessment of your wall or patio.
Often yes. A settled paver section or a single failed wall course can usually be lifted, re-based, and reset – far less expensive than replacement. Full replacement is the answer only when the base has failed across the whole run or the soil behind the wall has migrated. Call (844) 320-5930 – we’ll tell you which one you have before quoting.
A paver patio or walkway repair typically takes 1 – 3 days on site; a wall section rebuild runs 2 – 4 days; a full-addition or ADU scope runs 10 – 16 weeks depending on permits and inspections. Glendale requires permits pulled and inspections passed for any structural addition or ADU, and we handle both. Call (844) 320-5930 for a project-specific timeline.
We measure the existing block or paver directly – face height, lug depth, thickness – then match against the current Belgard spec sheet for the same series and confirm a color and texture match before ordering. If the original unit is discontinued, we source the closest current equivalent and show you side-by-side samples before you approve. Call (844) 320-5930 for a sourcing quote.
We also install and repair the surrounding trades – KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, Kohler and Toto fixtures, GAF and Owens Corning roofing, and Techo-Bloc hardscape as an alternative to Belgard. Under Clause 1 of the Haven Standard, every Rowan Construction Group Glendale project starts with a written price. Every crew is background-checked and uniformed, the visit comes with a documented photo record, and the 365-Day Done Right Promise stands behind the work.
Call (844) 320-5930 for a free estimate on your Belgard home addition or ADU in Glendale. The number is on the page; the price comes back in writing.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












